FreeSwitch LUA Briding two calls with retry带重试次数的两个呼叫的桥接

关于：以下的代码先进行一次呼叫，并重试max_retries1次，并且有两个不同的网关。其中一个呼叫被确定，它将播放一个问候消息，然后将进行二次拨号，重试max_retries2次，第一个呼叫也确定时，将桥接这两个呼叫。当然也有包含激活立体声的呼叫记录的两行代码。

注意：

1.参数uuid可以通过查找事件套接字中对应的呼叫/信道变量来识别呼叫。

2.参数dialstrXY的格式必须为：sofia/gateway/gateway_name/dial_number或者类似于这样的格式。根据想呼叫的类型可已设置不同呼叫（originate）命令格式

3.参数greeting_snd是可选的，如果未传递该参数，第一个呼叫确定后问候信息将不会被播放。

4.根据给定的greeting_snd文件的格式，可能需要安装并激活mod_shout模块

5.如果你要将这个代码保存到一个文件中，需命名类似于bridge.lua，即一定要带后缀.lua，并用以下命令执行

luarun bridge.lua uuid dialstr1 dialstr2 dialstr12 dialstr22 [greeting_snd]" (greeting_snd is optional)

可以在FreeSWITCH控制台或者是freeSWITCH事件套接字中执行

uuid = argv[1];
dialstr1 = argv[2];
dialstr2 = argv[3];
dialstr12 = argv[4];
dialstr22 = argv[5];
greeting_snd = "";
if (#argv > 6 and not argv[6] == "") then
    greeting_snd = "/tmp/audio/"..argv[6];
end
max_retriesl1 = 5;
max_retriesl2 = 3;
connected = false;
timeout = 45;
freeswitch.consoleLog("notice", "*********** STARTING Call ***********\n");
freeswitch.consoleLog("notice", "*********** DIALING "..dialstr1.." ***********\n");
originate_base1 = "{ignore_early_media=true,originate_timeout=90,hangup_after_bridge=true,uuid="..uuid..",leg=1}";
originate_str1 = originate_base1..dialstr1;
originate_str12 = originate_base1..dialstr12;
session1 = null;
retries = 0;
ostr = "";
repeat  
    retries = retries + 1;
    if (retries % 2) then 
        ostr = originate_str1;
    else 
        ostr = originate_str12; 
    end
    freeswitch.consoleLog("notice", "*********** Dialing Leg1: " .. ostr .. " - Try: "..retries.." ***********\n");
    session1 = freeswitch.Session(ostr);
    local hcause = session1:hangupCause();
    freeswitch.consoleLog("notice", "*********** Leg1: " .. hcause .. " - Try: "..retries.." ***********\n");
until not ((hcause == 'NO_ROUTE_DESTINATION' or hcause == 'RECOVERY_ON_TIMER_EXPIRE' or hcause == 'INCOMPATIBLE_DESTINATION' or hcause == 'CALL_REJECTED' or hcause == 'NORMAL_TEMPORARY_FAILURE') and (retries < max_retriesl1))
if (session1:ready()) then
    -- log to the console
    freeswitch.consoleLog("notice", "*********** Leg1 ("..ostr..") CONNECTED! ***********\n");
    -- Play greeting message
    if (not greeting_snd == "") then
        freeswitch.consoleLog("notice", "*********** Playing greeting sound: "..greeting_snd.." ***********\n");
        --session1:execute("sleep", 100);
        session1:execute("playback", greeting_snd);
    end
    originate_base2 = "{ignore_early_media=true,originate_timeout=90,hangup_after_bridge=true,uuid="..uuid..",leg=2}";
    originate_str2 = originate_base2..dialstr2;
    originate_str22 = originate_base2..dialstr22;
    -- Set recording: uncomment these two lines if you'd like to record the call in stereo (one leg on each channel)
    -- session1:setVariable("RECORD_STEREO", "true");
    -- session1:execute("record_session", "/tmp/"..uuid..".wav");
    -- Set ringback
    session1:setVariable("ringback", "%(2000,4000,440,480)");
    retries = 0;
    session2 = null;
    repeat  
        -- Create session2
        retries = retries + 1;
        if (retries % 2) then 
            ostr2 = originate_str2;
        else 
            ostr2 = originate_str22; 
        end
        freeswitch.consoleLog("notice", "*********** Dialing: " .. ostr2 .. " Try: "..retries.." ***********\n");
        session2 = freeswitch.Session(ostr2, session1);
        local hcause = session2:hangupCause();
        freeswitch.consoleLog("notice", "*********** Leg2: " .. hcause .. " Try: " .. retries .. " ***********\n");
    until not ((hcause == 'NO_ROUTE_DESTINATION' or hcause == 'RECOVERY_ON_TIMER_EXPIRE' or hcause == 'INCOMPATIBLE_DESTINATION' or hcause == 'CALL_REJECTED' or hcause == 'NORMAL_TEMPORARY_FAILURE') and (retries < max_retriesl2))
    if (session2:ready()) then
        freeswitch.consoleLog("notice", "*********** Leg2 ("..ostr2..") CONNECTED! ***********\n");
        freeswitch.bridge(session1, session2);
        -- Hangup session2 if session1 is over
        if (session2:ready()) then 
            session2:hangup(); 
        end
    end
    -- hangup when done
    if (session1:ready()) then session1:hangup(); end
end

注：本人翻译水平有限，如有误请指明

翻译出处：https://freeswitch.org/confluence/display/FREESWITCH/Lua+example+Bridging+two+calls+with+retry