Codeforces Round #310 (Div. 1) B. Case of Fugitive

B. Case of Fugitive
time limit per test
3 seconds
memory limit per test
256 megabytes
input
standard input
output
standard output

Andrewid the Android is a galaxy-famous detective. He is now chasing a criminal hiding on the planet Oxa-5, the planet almost fully covered with water.

The only dry land there is an archipelago of n narrow islands located in a row. For more comfort let's represent them as non-intersecting segments on a straight line: island i has coordinates [li, ri], besides, ri < li + 1 for 1 ≤ i ≤ n - 1.

To reach the goal, Andrewid needs to place a bridge between each pair of adjacent islands. A bridge of length a can be placed between the i-th and the (i + 1)-th islads, if there are such coordinates of x and y, that li ≤ x ≤ rili + 1 ≤ y ≤ ri + 1 and y - x = a.

The detective was supplied with m bridges, each bridge can be used at most once. Help him determine whether the bridges he got are enough to connect each pair of adjacent islands.

Input

The first line contains integers n (2 ≤ n ≤ 2·105) and m (1 ≤ m ≤ 2·105) — the number of islands and bridges.

Next n lines each contain two integers li and ri (1 ≤ li ≤ ri ≤ 1018) — the coordinates of the island endpoints.

The last line contains m integer numbers a1, a2, ..., am (1 ≤ ai ≤ 1018) — the lengths of the bridges that Andrewid got.

Output

If it is impossible to place a bridge between each pair of adjacent islands in the required manner, print on a single line "No" (without the quotes), otherwise print in the first line "Yes" (without the quotes), and in the second line print n - 1 numbers b1, b2, ..., bn - 1, which mean that between islands i and i + 1 there must be used a bridge number bi.

If there are multiple correct answers, print any of them. Note that in this problem it is necessary to print "Yes" and "No" in correct case.

Sample test(s)
input
4 4
1 4
7 8
9 10
12 14
4 5 3 8
output
Yes
2 3 1 
input
2 2
11 14
17 18
2 9
output
No
input
2 1
1 1
1000000000000000000 1000000000000000000
999999999999999999
output
Yes
1 
Note

In the first sample test you can, for example, place the second bridge between points 3 and 8, place the third bridge between points 7 and 10 and place the first bridge between points 10 and 14.

In the second sample test the first bridge is too short and the second bridge is too long, so the solution doesn't exist.

题目就是要在相邻的两个岛间修桥,使用给定的桥只能用一次,是否能得到答案

贪心的思想,先把桥进行排序,处理每个岛间距离的最大值与最小值,排序后,如果遇到一个最大值,就找出最小能满足的桥填上就可以了,因为

这段先遇到最大值,取走最小值后,对以后的选择没有影响,因为,以后的终点都比这个终点要大,那么适合的桥也可以相应更大,如果不能找个

一个合适的桥,那说明这是不可实现的,因为最大值 最小值有多个,所有用multiset保存,每个点找一次合适的,一次合适找是logn,所以总的复杂度

n logn,注意要用long long ,优化一下读取方法,能快不少!

#define N 200050
#define MOD -1000000007
int n,m,ans[N];
long long x[N],y[N];
struct node{
    int type,in;
    long long x;
    node(long long  xx,int typee){
        x = xx;type = typee;
    }
    node(){
        x = 0;type = 0;in = 0;
    }
    bool operator < (const node  t) const {
        return (x < t.x);
    }
};
struct bridge{
    long long  v;
    int in;
    bridge(long long  vv,int inn){
        v = vv;in = inn;
    }
    bridge(){
        v = 0;in = 0;
    }
    bool operator < (const bridge  t) const {
        return v<t.v;
    }
};
bridge bridges[N];
node nodes[2 * N];
multiset<bridge> mysets;
multiset<bridge>::iterator it;
inline ll getnum()
{
    char c = getchar();
    ll num,sign=1;
    for(;c<'0'||c>'9';c=getchar())if(c=='-')sign=-1;
    for(num=0;c>='0'&&c<='9';)
    {
        c-='0';
        num = num*10+c;
        c=getchar();
    }
    return num*sign;
}
int main()
{
    while (S2(n,m) != EOF)
    {
       FI(n){
           //cin>>x[i]>>y[i];
           x[i] = getnum();
           y[i] = getnum();
       }
       n--;
       FI(n){
           nodes[2 * i].x = x[i + 1] - y[i];
           nodes[2 * i].type = 0;
           nodes[2 * i].in = i;
           nodes[2 * i + 1].x = y[i+1] - x[i];
           nodes[2 * i + 1].type = 1;
           nodes[2 * i + 1].in = i;
           x[i] = nodes[2 * i].x;
           y[i] = nodes[2 * i + 1].x;
       }
       FI(m){
           // cin>>bridges[i].v;
           bridges[i].v = getnum();
           bridges[i].in = i + 1;
       }
       sort(nodes,nodes+2 * n);
       mysets.clear();
       FI(m){
           mysets.insert(bridges[i]);
       }
       int i;
        for(i=0;i<2 * n;i++){
            if(nodes[i].type){
                int index = nodes[i].in;
                bool flag = false;
                if(mysets.empty())
                    break;
                it = mysets.lower_bound(bridge(x[index],0));
                if(it != mysets.end()){
                    if(it->v >= x[index] && it->v <= y[index]){
                        ans[index] = it->in;
                        mysets.erase(it);
                        flag = true;
                        continue;
                    }
                    if(it->v > y[index]){
                        break;
                    }
                }
                if(!flag)
                    break;
            }
        }
        if(i == 2 * n){
            printf("Yes\n");
            FI(n){
                if(i){
                    printf(" %d",ans[i]);
                }
                else {
                    printf("%d",ans[i]);
                }
            }
            printf("\n");
        }
        else {
            printf("No\n");
        }
    }
    return 0;
}


  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值