文章目录
编译环境
Mac 10.14.6
ffmpeg 4.0.5
NDK 16（不能用Android SDK那里下载的NDK）
注意：因每个版本的编译脚本可能都不太一样，请谨慎使用。
MacOS下ndk Android 编译脚本(两个都可以用)
#!/bin/bash
# 清空上次的编译
make clean
set -x
API=14
# CPU
CPU=arm
# 你自己的NDK路径。
NDK=xxxx/Sdk/android-ndk-r16b
# 设置你的android平台编译器的版本 android4.0
SYSROOT=$NDK/platforms/android-$API/arch-arm/
# 编译使用的toolchain
TOOLCHAIN=$NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64
# 这个是输出的路径
PREFIX=$(pwd)/android/$CPU
function build_android
{
./configure \
--prefix=$PREFIX \
--enable-shared \
--disable-static \
--disable-doc \
--disable-ffplay \
--disable-ffprobe \
--disable-symver \
--disable-ffmpeg \
--cc=$TOOLCHAIN/bin/arm-linux-androideabi-gcc \
--cross-prefix=$TOOLCHAIN/bin/arm-linux-androideabi- \
--target-os=android \
--arch=arm \
--enable-cross-compile \
--sysroot=$SYSROOT \
--extra-cflags="-I$NDK/sysroot/usr/include/arm-linux-androideabi -isysroot $NDK/sysroot -fPIC -DANDROID -D__thumb__ -mthumb -Wfatal-errors -Wno-deprecated -mfloat-abi=softfp -marm -march=arm" \
--enable-neon
make clean all
make
make install
}
build_android
另一个版本
#!/bin/bash
export TMPDIR=xxxx/Downloads/ffmpeg-4.0.5/android
#这句很重要，不然会报错 unable to create temporary file in
# NDK的路径，根据自己的安装位置进行设置
NDK=xxx/android-ndk-r16b
# 编译针对的平台，可以根据自己的需求进行设置
# 这里选择最低支持android-14, arm架构，生成的so库是放在
# libs/armeabi文件夹下的，若针对x86架构，要选择arch-x86
PLATFORM=$NDK/platforms/android-16/arch-arm
# 工具链的路径，根据编译的平台不同而不同
# arm-linux-androideabi-4.9与上面设置的PLATFORM对应，4.9为工具的版本号，
# 根据自己安装的NDK版本来确定，一般使用最新的版本
TOOLCHAIN=$NDK/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64
function build_one
{
./configure \
--prefix=$PREFIX \
--enable-shared \
--disable-static \
--disable-doc \
--disable-ffmpeg \
--disable-ffplay \
--disable-ffprobe \
--disable-ffserver \
--disable-avdevice \
--disable-doc \
--disable-symver \
--cross-prefix=$TOOLCHAIN/bin/arm-linux-androideabi- \
--target-os=linux \
--arch=arm \
--enable-cross-compile \
--sysroot=$PLATFORM \
--extra-cflags="-I$PLATFORM/usr/include" \
# --extra-ldflags="-L$PLATFORM/usr/lib -nostdlib" \ #①这一句我注释掉了，不然会报 ld: -single_module: unknown option
$ADDITIONAL_CONFIGURE_FLAG
sed -i '' 's/HAVE_LRINT 0/HAVE_LRINT 1/g' config.h
sed -i '' 's/HAVE_LRINTF 0/HAVE_LRINTF 1/g' config.h
sed -i '' 's/HAVE_ROUND 0/HAVE_ROUND 1/g' config.h
sed -i '' 's/HAVE_ROUNDF 0/HAVE_ROUNDF 1/g' config.h
sed -i '' 's/HAVE_TRUNC 0/HAVE_TRUNC 1/g' config.h
sed -i '' 's/HAVE_TRUNCF 0/HAVE_TRUNCF 1/g' config.h
sed -i '' 's/HAVE_CBRT 0/HAVE_CBRT 1/g' config.h
sed -i '' 's/HAVE_RINT 0/HAVE_RINT 1/g' config.h
make clean
make -j4
make install
}
# arm v7vfp
CPU=armv7-a
OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfp -marm -march=$CPU "
PREFIX=./android/$CPU-vfp
ADDITIONAL_CONFIGURE_FLAG=
build_one
# CPU=armv
# PREFIX=$(pwd)/android/$CPU
# ADDI_CFLAGS="-marm"
# build_one
#arm v6
#CPU=armv6
#OPTIMIZE_CFLAGS="-marm -march=$CPU"
#PREFIX=./android/$CPU
#ADDITIONAL_CONFIGURE_FLAG=
#build_one
#arm v7vfpv3
# CPU=armv7-a
# OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=$CPU "
# PREFIX=./android/$CPU
# ADDITIONAL_CONFIGURE_FLAG=
# build_one
#arm v7n
#CPU=armv7-a
#OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=neon -marm -march=$CPU -mtune=cortex-a8"
#PREFIX=./android/$CPU
#ADDITIONAL_CONFIGURE_FLAG=--enable-neon
#build_one
#arm v6+vfp
#CPU=armv6
#OPTIMIZE_CFLAGS="-DCMP_HAVE_VFP -mfloat-abi=softfp -mfpu=vfp -marm -march=$CPU"
#PREFIX=./android/${CPU}_vfp
#ADDITIONAL_CONFIGURE_FLAG=
#build_one
第三个版本
#!/usr/bin/env bash
# 当前系统
export HOST_TAG=darwin-x86_64
# 支持的 Android CUP 架构
# export ARCH=aarch64
# export CPU=armv8-a
export ARCH=armv7a
export CPU=armv7-a
# 支持的 Android 最低系统版本
export MIN=21
export ANDROID_NDK_PLATFORM=android-21
export PREFIX=$(pwd)/android/$CPU
# NDK 根目录
export NDK=xxxx/android-ndk-r20b
export MIN_PLATFORM=$NDK/platforms/android-$MIN
export SYSROOT=$NDK/sysroot
export TOOLCHAIN=$NDK/toolchains/llvm/prebuilt/$HOST_TAG
export AR=$TOOLCHAIN/bin/arm-linux-androideabi-ar
export AS=$TOOLCHAIN/bin/arm-linux-androideabi-as
export CC=$TOOLCHAIN/bin/$ARCH-linux-androideabi$MIN-clang
export CXX=$TOOLCHAIN/bin/$ARCH-linux-androideabi$MIN-clang++
export LD=$TOOLCHAIN/bin/arm-linux-androideabi-ld
export NM=$TOOLCHAIN/bin/arm-linux-androideabi-nm
export RANLIB=$TOOLCHAIN/bin/arm-linux-androideabi-ranlib
export STRIP=$TOOLCHAIN/bin/arm-linux-androideabi-strip
FF_EXTRA_CFLAGS=""
# FF_CFLAGS="-O3 -Wall -pipe -ffast-math -fstrict-aliasing -Werror=strict-aliasing -Wno-psabi -Wa,--noexecstack -DANDROID "
# FF_CFLAGS="-DANDROID -I$SYSROOT/usr/include"
# FF_LDFLAGS=" -shared -rpath-link=$MIN_PLATFORM/arch-arm64/usr/lib -L$MIN_PLATFORM/arch-arm64/usr/lib -nostdlib -fPIC -shared -pie -p -shared"
# OPTIMIZE_CFLAGS="-I$NDK/sysroot/usr/include -mfloat-abi=softfp -mfpu=vfp -marm -march=$CPU -DANDROID_PLATFORM=android-21"
OPTIMIZE_CFLAGS="-DANDROID -I$NDK/sysroot/usr/include/arm-linux-androideabi/"
# ADDI_LDFLAGS="-shared -rpath-link=$SYSROOT/usr/lib/aarch64-linux-android -L$SYSROOT/usr/lib/aarch64-linux-android -fuse-ld=bfd"
# ADDI_LDFLAGS="-Wl,-rpath-link=$MIN_PLATFORM/arch-arm/usr/lib -Wl,-rpath-link=$TOOLCHAIN/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a -L$MIN_PLATFORM/arch-arm/usr/lib -L$TOOLCHAIN/lib/gcc/arm-linux-androideabi/4.9.x/armv7-a"
ADDI_LDFLAGS="-Wl,-rpath-link=$MIN_PLATFORM/arch-arm/usr/lib -L$MIN_PLATFORM/arch-arm/usr/lib -nostdlib"
sed -i "" "s/SLIBNAME_WITH_MAJOR='\$(SLIBNAME).\$(LIBMAJOR)'/SLIBNAME_WITH_MAJOR='\$(SLIBPREF)\$(FULLNAME)-\$(LIBMAJOR)\$(SLIBSUF)'/" configure
sed -i "" "s/LIB_INSTALL_EXTRA_CMD='\$\$(RANLIB) \"\$(LIBDIR)\\/\$(LIBNAME)\"'/LIB_INSTALL_EXTRA_CMD='\$\$(RANLIB) \"\$(LIBDIR)\\/\$(LIBNAME)\"'/" configure
sed -i "" "s/SLIB_INSTALL_NAME='\$(SLIBNAME_WITH_VERSION)'/SLIB_INSTALL_NAME='\$(SLIBNAME_WITH_MAJOR)'/" configure
sed -i "" "s/SLIB_INSTALL_LINKS='\$(SLIBNAME_WITH_MAJOR) \$(SLIBNAME)'/SLIB_INSTALL_LINKS='\$(SLIBNAME)'/" configure
# sed -i "" "s/SHFLAGS='-shared -Wl,-soname,\$(SLIBNAME)'/SHFLAGS='-shared -soname \$(SLIBNAME)'/" configure
# sed -i "" "s/-Wl//g" configure
# --sysroot=$SYSROOT \
# --ld=$LD \
./configure \
--prefix=$PREFIX \
--ar=$AR \
--as=$AS \
--cc=$CC \
--cxx=$CXX \
--nm=$NM \
--ranlib=$RANLIB \
--strip=$STRIP \
--arch=$ARCH \
--target-os=android \
--enable-cross-compile \
--disable-asm \
--enable-shared \
--disable-static \
--disable-ffprobe \
--disable-ffplay \
--disable-ffmpeg \
--disable-debug \
--disable-symver \
--disable-stripping \
--extra-cflags="-Os -fpic $OPTIMIZE_CFLAGS" \
--extra-ldflags="$ADDI_LDFLAGS"
# --extra-cflags="$FF_EXTRA_CFLAGS $FF_CFLAGS" \
# --extra-ldflags="$FF_LDFLAGS"
sed -i "" "s/#define HAVE_TRUNC 0/#define HAVE_TRUNC 1/" config.h
sed -i "" "s/#define HAVE_TRUNCF 0/#define HAVE_TRUNCF 1/" config.h
sed -i "" "s/#define HAVE_RINT 0/#define HAVE_RINT 1/" config.h
sed -i "" "s/#define HAVE_LRINT 0/#define HAVE_LRINT 1/" config.h
sed -i "" "s/#define HAVE_LRINTF 0/#define HAVE_LRINTF 1/" config.h
sed -i "" "s/#define HAVE_ROUND 0/#define HAVE_ROUND 1/" config.h
sed -i "" "s/#define HAVE_ROUNDF 0/#define HAVE_ROUNDF 1/" config.h
sed -i "" "s/#define HAVE_CBRT 0/#define HAVE_CBRT 1/" config.h
sed -i "" "s/#define HAVE_CBRTF 0/#define HAVE_CBRTF 1/" config.h
sed -i "" "s/#define HAVE_COPYSIGN 0/#define HAVE_COPYSIGN 1/" config.h
sed -i "" "s/#define HAVE_ERF 0/#define HAVE_ERF 1/" config.h
sed -i "" "s/#define HAVE_HYPOT 0/#define HAVE_HYPOT 1/" config.h
sed -i "" "s/#define HAVE_ISNAN 0/#define HAVE_ISNAN 1/" config.h
sed -i "" "s/#define HAVE_ISFINITE 0/#define HAVE_ISFINITE 1/" config.h
sed -i "" "s/#define HAVE_INET_ATON 0/#define HAVE_INET_ATON 1/" config.h
sed -i "" "s/#define getenv(x) NULL/\\/\\/ #define getenv(x) NULL/" config.h
第三个需要
# 编译
$ make -j 8
$ make install
最新版本编译（NDK20 ffmpeg4.2.2 环境MAC OS）
一个正确的编译文档，并且分析的很好
https://www.jianshu.com/p/350f8e083e82
重点
1.配置编译器
2.NDK交叉编译工具的选择 llvm
MacOS系统使用的编译脚本
./configure --prefix=/usr/local/ffmpeg --enable-gpl --enable-nonfree --enable-libass \
--enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus \
--enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --extra-ldflags=-L/usr/local/lib
sudo make && sudo make install
这里再加一个版本（这是根据brew的编译脚本修改，增加了几个常用的外部库）
./configure --prefix=/usr/local/ffmpeg --enable-shared --enable-pthreads --enable-version3 --enable-avresample --cc=clang --host-cflags='-I/Library/Java/JavaVirtualMachines/adoptopenjdk-12.0.1.jdk/Contents/Home/include -I/Library/Java/JavaVirtualMachines/adoptopenjdk-12.0.1.jdk/Contents/Home/include/darwin' --host-ldflags= --enable-ffplay --enable-gnutls --enable-gpl --enable-nonfree --enable-libaom --enable-libbluray --enable-libmp3lame --enable-libass --enable-libfdk-aac --enable-libopus --enable-librubberband --enable-libsnappy --enable-libtesseract --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libxvid --enable-lzma --enable-libfontconfig --enable-libfreetype --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libspeex --enable-videotoolbox --enable-audiotoolbox --disable-libjack --disable-indev=jack --enable-libaom --enable-libsoxr
问题1
………android-ndk-r20b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-clang is unable to create an executable file.
C compiler test failed.
问题2
默认编译出来的so库版本号是在.so之后，Android识别不了，所以要修改configure文件（有的也说不需要修改）
ranlib/usr/local/lib/libavdevice.a: No such file or directory
make: *** [install-libavdevice-static] Error 127
解决（好像高版本的都不用修改了）
对应的字段改为：
SLIBNAME_WITH_MAJOR='$(SLIBPREF)$(FULLNAME)-$(LIBMAJOR)$(SLIBSUF)'
LIB_INSTALL_EXTRA_CMD='$$(RANLIB) "$(LIBDIR)/$(LIBNAME)"'
SLIB_INSTALL_NAME='$(SLIBNAME_WITH_MAJOR)'
SLIB_INSTALL_LINKS='$(SLIBNAME)'
问题3
android-ndk-r20b/toolchains/arm-linux-androideabi-4.9/prebuilt/darwin-x86_64/bin/arm-linux-androideabi-gcc is unable to create an executable file.
C compiler test failed.
问题4
error: request for member 's_addr' in something not a structure or union
mreqs.imr_multiaddr.s_addr = ((struct sockaddr_in *)addr)->sin_addr.s_addr;
ffmpeg 4.2.2存在，把代码相应的修改一下就好了，网上有解决方案
https://www.jianshu.com/p/4503d6f81998
问题5
mkdir: cannot create directory ‘/usr/local/share/man/man1’: Permission denied
doc/Makefile:125: recipe for target 'install-man' failed
make: *** [install-man] Error 1
sudo chmod -R 777 给文件夹权限
问题6
MacOS环境下执行编译命令的时候如果没有直接用brew安装
brew install x265
#brew upgrade x265
brew install fdk-aac
问题7
ld: can't map file, errno=22 file '/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/' for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [doc/print_options] Error 1
make: *** Waiting for unfinished jobs....
6 warnings generated.
8 warnings generated.
STRIP libavcodec/x86/vp9itxfm.o
这样引用才可以：
extern "C" { //C++中特殊处理
#include "libavutil/log.h"
#include "libavcodec/avcodec.h"
#include "sdl/sdl_videos.h"
}
问题8
java.lang.UnsatisfiedLinkError: dalvik.system.PathClassLoader[DexPathList[[zip file
"/data/app/com.future.ffmpegmusic-IQyW2Tdvr3jtASN2O3GXng==/base.apk"],nativeLibraryDirectories=
[/data/app/com.future.ffmpegmusic-IQyW2Tdvr3jtASN2O3GXng==/lib/arm64, /system/lib64,
/product/lib64]]] couldn't find "libnative-lib.so"
在app的build.gradle文件中增加
解决
splits {
abi {
enable true
reset()
include 'armeabi-v7a'
}
}
总结 血泪史
-
1.如果想一次性成功找个靠谱的教程，严格按照他的版本和环境来操作。
-
2.因为NDK和ffmpeg的版本更迭了很多，每个版本兼容性都不一样。从NDK17以后默认使用了clang进行编译，ffmpeg4以上好像都支持了。
-
3.Mac和Linux 的编译脚本主要是工具的配置，一般Mac都是darwin开头 Linux 是liunx开头，最好在Linux下编译。
-
4.ffmpeg 低版本的需要用 --target-os=linux 高版本的要使用 --target-os=android 因为已经添加了对他的支持
扫一扫
995
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
