GATT Profile UUID

 UUID
         “GATT层”中定义的所有属性都有⼀个UUID值，UUID是全球唯⼀的128位的号码，它⽤来识别不同的特性。
1 蓝⽛技术联盟 UUID
蓝⽛核⼼规范制定了两种不同的UUID，⼀种是基本的UUID，⼀种是代替基本UUID的16位UUID。
所有的蓝⽛技术联盟定义UUID共⽤了⼀个基本的UUID：0x0000xxxx-0000-1000-8000-00805F9B34FB为了进⼀步简化基本UUID，每⼀个蓝⽛技术联盟定义的属性有⼀个唯⼀的，每⼀个蓝⽛技术联盟定义的属性有16位UUID，以代替上⾯的基本UUID的‘x’部分。例如，Heart Rate Measurement使⽤0X2A37作为它的16位UUID，因此它完整的128位UUID为：0x00002A37-0000-1000-8000-00805F9B34FB
        虽然蓝⽛技术联盟使⽤相同的基本UUID，但是16位的UUID⾜够唯⼀地识别蓝⽛技术联盟所定义的各种属性。
        蓝⽛技术联盟所⽤的基本UUID不能⽤于任何定制的属性、服务和特性。对于定制的属性，必对于定制的属性，必须使⽤另外完整的128位UUID。
2 供应商特定的UUID
       SoftDevice 根据蓝⽛技术联盟定义UUID类似的⽅式定义UUID：先增加⼀个特定的基本
UUID，再定义⼀个16位的UUID（类似于⼀个别名），再加载在基本UUID之上。这种采⽤为所
有的定制属性定义⼀个共⽤的基本UUID的⽅式使得应⽤变为更加简单，⾄少在同⼀服务中更是
如此。
使⽤软件nRFgo Studio⾮常容易产⽣⼀个新的基本UUID：
例如，在LED BUTTON⽰例中，采⽤0x0000xxxx-1212-EFDE-1523-785FEABCD123作为基
本UUID。
蓝⽛核⼼规范没有任何规则或是建议如何对加⼊基本UUID的16位UUID进⾏分配，因此你可以
按照你的意图来任意分配。
例如，在LED BUTTON⽰例中，0x1523作为服务的UUID，0x1524作为LED特性的
UUID，0x1525作为按键状态特性的UUID。

 

GATT 中用到的UUID定义

/**
    GATT Service UUIDs
*/
#define IMMEDIATE_ALERT_SERV_UUID       0x1802  // Immediate Alert
#define LINK_LOSS_SERV_UUID             0x1803  // Link Loss
#define TX_PWR_LEVEL_SERV_UUID          0x1804  // Tx Power
#define CURRENT_TIME_SERV_UUID          0x1805  // Current Time Service
#define REF_TIME_UPDATE_SERV_UUID       0x1806  // Reference Time Update Service
#define NEXT_DST_CHANGE_SERV_UUID       0x1807  // Next DST Change Service
#define GLUCOSE_SERV_UUID               0x1808  // Glucose
#define THERMOMETER_SERV_UUID           0x1809  // Health Thermometer
#define DEVINFO_SERV_UUID               0x180A  // Device Information
#define NWA_SERV_UUID                   0x180B  // Network Availability
#define HEARTRATE_SERV_UUID             0x180D  // Heart Rate
#define PHONE_ALERT_STS_SERV_UUID       0x180E  // Phone Alert Status Service
#define BATT_SERV_UUID                  0x180F  // Battery Service
#define BLOODPRESSURE_SERV_UUID         0x1810  // Blood Pressure
#define ALERT_NOTIF_SERV_UUID           0x1811  // Alert Notification Service
#define HID_SERV_UUID                   0x1812  // Human Interface Device
#define SCAN_PARAM_SERV_UUID            0x1813  // Scan Parameters
#define RSC_SERV_UUID                   0x1814  // Running Speed and Cadence
#define CSC_SERV_UUID                   0x1816  // Cycling Speed and Cadence
#define CYCPWR_SERV_UUID                0x1818  // Cycling Power
#define LOC_NAV_SERV_UUID               0x1819  // Location and Navigation

/**
    GATT Characteristic UUIDs
*/
#define ALERT_LEVEL_UUID                0x2A06  // Alert Level
#define TX_PWR_LEVEL_UUID               0x2A07  // Tx Power Level
#define DATE_TIME_UUID                  0x2A08  // Date Time
#define DAY_OF_WEEK_UUID                0x2A09  // Day of Week
#define DAY_DATE_TIME_UUID              0x2A0A  // Day Date Time
#define EXACT_TIME_256_UUID             0x2A0C  // Exact Time 256
#define DST_OFFSET_UUID                 0x2A0D  // DST Offset
#define TIME_ZONE_UUID                  0x2A0E  // Time Zone
#define LOCAL_TIME_INFO_UUID            0x2A0F  // Local Time Information
#define TIME_WITH_DST_UUID              0x2A11  // Time with DST
#define TIME_ACCURACY_UUID              0x2A12  // Time Accuracy
#define TIME_SOURCE_UUID                0x2A13  // Time Source
#define REF_TIME_INFO_UUID              0x2A14  // Reference Time Information
#define TIME_UPDATE_CTRL_PT_UUID        0x2A16  // Time Update Control Point
#define TIME_UPDATE_STATE_UUID          0x2A17  // Time Update State
#define GLUCOSE_MEAS_UUID               0x2A18  // Glucose Measurement
#define BATT_LEVEL_UUID                 0x2A19  // Battery Level
#define TEMP_MEAS_UUID                  0x2A1C  // Temperature Measurement
#define TEMP_TYPE_UUID                  0x2A1D  // Temperature Type
#define IMEDIATE_TEMP_UUID              0x2A1E  // Intermediate Temperature
#define MEAS_INTERVAL_UUID              0x2A21  // Measurement Interval
#define BOOT_KEY_INPUT_UUID             0x2A22  // Boot Keyboard Input Report
#define SYSTEM_ID_UUID                  0x2A23  // System ID
#define MODEL_NUMBER_UUID               0x2A24  // Model Number String
#define SERIAL_NUMBER_UUID              0x2A25  // Serial Number String
#define FIRMWARE_REV_UUID               0x2A26  // Firmware Revision String
#define HARDWARE_REV_UUID               0x2A27  // Hardware Revision String
#define SOFTWARE_REV_UUID               0x2A28  // Software Revision String
#define MANUFACTURER_NAME_UUID          0x2A29  // Manufacturer Name String
#define IEEE_11073_CERT_DATA_UUID       0x2A2A  // IEEE 11073-20601 Regulatory Certification Data List
#define CURRENT_TIME_UUID               0x2A2B  // Current Time
#define SCAN_REFRESH_UUID               0x2A31  // Scan Refresh
#define BOOT_KEY_OUTPUT_UUID            0x2A32  // Boot Keyboard Output Report
#define BOOT_MOUSE_INPUT_UUID           0x2A33  // Boot Mouse Input Report
#define GLUCOSE_CONTEXT_UUID            0x2A34  // Glucose Measurement Context
#define BLOODPRESSURE_MEAS_UUID         0x2A35  // Blood Pressure Measurement
#define IMEDIATE_CUFF_PRESSURE_UUID     0x2A36  // Intermediate Cuff Pressure
#define HEARTRATE_MEAS_UUID             0x2A37  // Heart Rate Measurement
#define BODY_SENSOR_LOC_UUID            0x2A38  // Body Sensor Location
#define HEARTRATE_CTRL_PT_UUID          0x2A39  // Heart Rate Control Point
#define NETWORK_AVAIL_UUID              0x2A3E  // Network Availability
#define ALERT_STATUS_UUID               0x2A3F  // Alert Status
#define RINGER_CTRL_PT_UUID             0x2A40  // Ringer Control Point
#define RINGER_SETTING_UUID             0x2A41  // Ringer Setting
#define ALERT_CAT_ID_BMASK_UUID         0x2A42  // Alert Category ID Bit Mask
#define ALERT_CAT_ID_UUID               0x2A43  // Alert Category ID
#define ALERT_NOTIF_CTRL_PT_UUID        0x2A44  // Alert Notification Control Point
#define UNREAD_ALERT_STATUS_UUID        0x2A45  // Unread Alert Status
#define NEW_ALERT_UUID                  0x2A46  // New Alert
#define SUP_NEW_ALERT_CAT_UUID          0x2A47  // Supported New Alert Category
#define SUP_UNREAD_ALERT_CAT_UUID       0x2A48  // Supported Unread Alert Category
#define BLOODPRESSURE_FEATURE_UUID      0x2A49  // Blood Pressure Feature
#define HID_INFORMATION_UUID            0x2A4A  // HID Information
#define REPORT_MAP_UUID                 0x2A4B  // Report Map
#define HID_CTRL_PT_UUID                0x2A4C  // HID Control Point
#define REPORT_UUID                     0x2A4D  // Report
#define PROTOCOL_MODE_UUID              0x2A4E  // Protocol Mode
#define SCAN_INTERVAL_WINDOW_UUID       0x2A4F  // Scan Interval Window
#define PNP_ID_UUID                     0x2A50  // PnP ID
#define GLUCOSE_FEATURE_UUID            0x2A51  // Glucose Feature
#define RECORD_CTRL_PT_UUID             0x2A52  // Record Access Control Point
#define RSC_MEAS_UUID                   0x2A53  // RSC Measurement
#define RSC_FEATURE_UUID                0x2A54  // RSC Feature
#define SC_CTRL_PT_UUID                 0x2A55  // SC Control Point
#define CSC_MEAS_UUID                   0x2A5B  // CSC Measurement
#define CSC_FEATURE_UUID                0x2A5C  // CSC Feature
#define SENSOR_LOC_UUID                 0x2A5D  // Sensor Location
#define CYCPWR_MEAS_UUID                0x2A63  // Cycling Power Measurement
#define CYCPWR_VECTOR_UUID              0x2A64  // Cycling Power Vector
#define CYCPWR_FEATURE_UUID             0x2A65  // Cycling Power Feature
#define CYCPWR_CTRL_PT_UUID             0x2A66  // Cycling Power Control Point
#define LOC_SPEED_UUID                  0x2A67  // Location and Speed
#define NAV_UUID                        0x2A68  // Navigation
#define POS_QUALITY_UUID                0x2A69  // Position Quality
#define LN_FEATURE_UUID                 0x2A6A  // LN Feature
#define LN_CTRL_PT_UUID                 0x2A6B  // LN Control Point  

/**
    GATT Unit UUIDs
*/
#define GATT_UNITLESS_UUID                    0x2700  // <Symbol>, <Expressed in terms of SI base units>
#define GATT_UNIT_LENGTH_METER_UUID           0x2701  // m, m
#define GATT_UNIT_MASS_KGRAM_UUID             0x2702  // kg, kg
#define GATT_UNIT_TIME_SECOND_UUID            0x2703  // s, s
#define GATT_UNIT_ELECTRIC_CURRENT_A_UUID     0x2704  // A, A
#define GATT_UNIT_THERMODYN_TEMP_K_UUID       0x2705  // K, K
#define GATT_UNIT_AMOUNT_SUBSTANCE_M_UUID     0x2706  // mol, mol
#define GATT_UNIT_LUMINOUS_INTENSITY_C_UUID   0x2707  // cd, cd

#define GATT_UNIT_AREA_SQ_MTR_UUID            0x2710  // m^2, m^2
#define GATT_UNIT_VOLUME_CUBIC_MTR_UUID       0x2711  // m^3, m^3
#define GATT_UNIT_VELOCITY_MPS_UUID           0x2712  // m/s, m s^-1
#define GATT_UNIT_ACCELERATION_MPS_SQ_UUID    0x2713  // m/s^2, m s^-2
#define GATT_UNIT_WAVENUMBER_RM_UUID          0x2714  // ? m^-1
#define GATT_UNIT_DENSITY_KGPCM_UUID          0x2715  // p, kg m^-3
#define GATT_UNIT_SURFACE_DENSITY_KGPSM_UUID  0x2716  // pA, kg m^-2
#define GATT_UNIT_SPECIFIC_VOLUME_CMPKG_UUID  0x2717  // v, m^3 kg^-1
#define GATT_UNIT_CURRENT_DENSITY_APSM_UUID   0x2718  // j, A m^-2
#define GATT_UNIT_MAG_FIELD_STRENGTH_UUID     0x2719  // H, A m
#define GATT_UNIT_AMOUNT_CONC_MPCM_UUID       0x271A  // c, mol m^-3
#define GATT_UNIT_MASS_CONC_KGPCM_UUID        0x271B  // c, kg m^-3
#define GATT_UNIT_LUMINANCE_CPSM_UUID         0x271C  // Lv, cd m^-2
#define GATT_UNIT_REFRACTIVE_INDEX_UUID       0x271D  // n, 1
#define GATT_UNIT_RELATIVE_PERMEABLILTY_UUID  0x271E  // u, 1
#define GATT_UNIT_PLANE_ANGLE_RAD_UUID        0x2720  // rad, m m-1
#define GATT_UNIT_SOLID_ANGLE_STERAD_UUID     0x2721  // sr, m2 m-2
#define GATT_UNIT_FREQUENCY_HTZ_UUID          0x2722  // Hz, s-1
#define GATT_UNIT_FORCE_NEWTON_UUID           0x2723  // N, m kg s-2
#define GATT_UNIT_PRESSURE_PASCAL_UUID        0x2724  // Pa, N/m2 = m2 kg s-2
#define GATT_UNIT_ENERGY_JOULE_UUID           0x2725  // J, N m = m2 kg s-2
#define GATT_UNIT_POWER_WATT_UUID             0x2726  // W, J/s = m2 kg s-3
#define GATT_UNIT_E_CHARGE_C_UUID             0x2727  // C, sA
#define GATT_UNIT_E_POTENTIAL_DIF_V_UUID      0x2728  // V, W/A = m2 kg s-3 A-1

#define GATT_UNIT_CELSIUS_TEMP_DC_UUID        0x272F  // oC, t/oC = T/K - 273.15

#define GATT_UNIT_TIME_MINUTE_UUID            0x2760  // min, 60 s
#define GATT_UNIT_TIME_HOUR_UUID              0x2761  // h, 3600 s
#define GATT_UNIT_TIME_DAY_UUID               0x2762  // d, 86400 s
#define GATT_UNIT_PLANE_ANGLE_DEGREE_UUID     0x2763  // o, (pi/180) rad
#define GATT_UNIT_PLANE_ANGLE_MINUTE_UUID     0x2764  // ', (pi/10800) rad
#define GATT_UNIT_PLANE_ANGLE_SECOND_UUID     0x2765  // '', (pi/648000) rad
#define GATT_UNIT_AREA_HECTARE_UUID           0x2766  // ha, 10^4 m^2
#define GATT_UNIT_VOLUME_LITRE_UUID           0x2767  // l, 10^-3 m^3
#define GATT_UNIT_MASS_TONNE_UUID             0x2768  // t, 10^3 kg

#define GATT_UINT_LENGTH_YARD_UUID            0x27A0  // yd, 0.9144 m
#define GATT_UNIT_LENGTH_PARSEC_UUID          0x27A1  // pc, 3.085678 ?1016 m
#define GATT_UNIT_LENGTH_INCH_UUID            0x27A2  // in, 0.0254 m
#define GATT_UNIT_LENGTH_FOOT_UUID            0x27A3  // ft, 0.3048 m
#define GATT_UNIT_LENGTH_MILE_UUID            0x27A4  // mi, 1609.347 m
#define GATT_UNIT_PRESSURE_PFPSI_UUID         0x27A5  // psi, 6.894757 ?103 Pa
#define GATT_UNIT_VELOCITY_KMPH_UUID          0x27A6  // km/h, 0.2777778 m^s-1
#define GATT_UNIT_VELOCITY_MPH_UUID           0x27A7  // mi/h, 0.44704 m^ s-1
#define GATT_UNIT_ANGULAR_VELOCITY_RPM_UUID   0x27A8  // r/min, 0.1047198 rad s-1
#define GATT_UNIT_ENERGY_GCAL_UUID            0x27A9  //
#define GATT_UNIT_ENERGY_KCAL_UUID            0x27AA  // kcal, 4190.02 J
#define GATT_UNIT_ENERGY_KWH_UUID             0x27AB  // kWh, 3600000 J
#define GATT_UNIT_THERMODYN_TEMP_DF_UUID      0x27AC  // oF, t/oF = T/K ?1.8 - 459.67
#define GATT_UNIT_PERCENTAGE_UUID             0x27AD  // %
#define GATT_UNIT_PER_MILE_UUID               0x27AE  //
#define GATT_UNIT_PERIOD_BPM_UUID             0x27AF  //
#define GATT_UNIT_E_CHARGE_AH_UUID            0x27B0  //
#define GATT_UNIT_MASS_DENSITY_MGPD_UUID      0x27B1  //
#define GATT_UNIT_MASS_DENSITY_MMPL_UUID      0x27B2  //
#define GATT_UNIT_TIME_YEAR_UUID              0x27B3  //
#define GATT_UNIT_TIME_MONTH_UUID             0x27B4  //