#
# Copyright 2007 by Texas Instruments Incorporated.
#
# All rights reserved. Property of Texas Instruments Incorporated.
# Restricted rights to use, duplicate or disclose this code are
# granted through contract.
#
#
#
# ======== xdcpaths.mak ========
# definition of XDC paths and commands
#
# You must set these variables to match your environment. Note that
# BIOS_INSTALL_DIR is only required to build DSP-side servers
# (for multi-core devices) or DSP-side executables (for single core devices).
#CE_INSTALL_DIR = _your_CE_installation_directory_/codec_engine_1_10
#XDC_INSTALL_DIR = _your_XDCTOOLS_installation_directory
#BIOS_INSTALL_DIR = _your_SABIOS_installation_directory/bios_5_31
CE_INSTALL_DIR = /home/davinci/dvevm_1_20/codec_engine_1_10_01
XDC_INSTALL_DIR = /home/davinci/dvevm_1_20/xdc_2_94
BIOS_INSTALL_DIR = /home/davinci/dvevm_1_20/bios_5_31_01
# If you're not building DSP-side content, you should set REQUIRE_BIOS to 0.
REQUIRE_BIOS = 1
ifeq ($(REQUIRE_BIOS), 1)
# BIOS_INSTALL_DIR is the location of your DSP/BIOS installation.
ifeq ($(wildcard $(BIOS_INSTALL_DIR)/packages/ti/bios/package.xdc),)
$(error BIOS_INSTALL_DIR is set to "$(BIOS_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
endif
# CE_INSTALL_DIR is the location of your Codec Engine.
ifeq ($(wildcard $(CE_INSTALL_DIR)/packages/ti/sdo/ce/package.xdc),)
$(error CE_INSTALL_DIR is set to "$(CE_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
# XDC_INSTALL_DIR is the location of your XDCTOOLS installation.
ifeq ($(wildcard $(XDC_INSTALL_DIR)/packages/xdc/package.xdc),)
$(error XDC_INSTALL_DIR is set to "$(XDC_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
# The Codec Engine depends on other packages. Add the paths to those
# other packages here.
#
# Note that some distributions of the Codec Engine include a directory named
# "cetools" which contains these packages. If this script detects
# the existence of that directory, it addes the cetools directory only.
ifeq ($(wildcard $(CE_INSTALL_DIR)/cetools), )
# no cetools directory
#XDAIS_INSTALL_DIR = _your_xDAIS_installation_directory
#DSPLINK_INSTALL_DIR = _your_DSPLink_installation_directory
#CMEM_INSTALL_DIR = _your_CMEM_installation_directory
#FC_INSTALL_DIR = _your_FC_installation_directory
XDAIS_INSTALL_DIR = /home/davinci/dvevm_1_20/xdais_5_10
DSPLINK_INSTALL_DIR = /home/davinci/dvevm_1_20/dsplink_1_30_08_02
CMEM_INSTALL_DIR = /home/davinci/dvevm_1_20/cmem_1_02
FC_INSTALL_DIR = /home/davinci/dvevm_1_20/framework_components_1_10_04
# more validation, just to be sure...
ifeq ($(wildcard $(XDAIS_INSTALL_DIR)/packages/ti/xdais/package.xdc),)
$(error XDAIS_INSTALL_DIR is set to "$(XDAIS_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
ifeq ($(wildcard $(DSPLINK_INSTALL_DIR)/packages/dsplink/gpp/package.xdc),)
$(error DSPLINK_INSTALL_DIR is set to "$(DSPLINK_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
ifeq ($(wildcard $(CMEM_INSTALL_DIR)/packages/ti/sdo/linuxutils/cmem/package.xdc),)
$(error CMEM_INSTALL_DIR is set to "$(CMEM_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
ifeq ($(wildcard $(FC_INSTALL_DIR)/packages/ti/sdo/fc/dskt2/package.xdc),)
$(error FC_INSTALL_DIR is set to "$(FC_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
MISC_PACKAGES = $(XDAIS_INSTALL_DIR)/packages;$(DSPLINK_INSTALL_DIR)/packages;$(CMEM_INSTALL_DIR)/packages/;$(FC_INSTALL_DIR)/packages
else
MISC_PACKAGES = $(CE_INSTALL_DIR)/cetools/packages
endif
# XDC_PATH is a semi-colon seperated list of package repositories. To
# build this example, it needs to include:
# * Codec Engine examples repository
# * Codec Engine repository ($(CE_INSTALL_DIR)/packages)
# * Codec Engine tools repository ($(CE_INSTALL_DIR)/cetools/packages)
# * BIOS repository ($(BIOS_INSTALL_DIR)/packages), if BIOS_INSTALL_DIR is set
XDC_PATH := $(CE_INSTALL_DIR)/packages;$(MISC_PACKAGES)
ifeq ($(REQUIRE_BIOS), 1)
# if BIOS_INSTALL_DIR is set, add it to the XDC_PATH
XDC_PATH := $(XDC_PATH);$(BIOS_INSTALL_DIR)/packages
endif
#
# @(#) codec_engine_1_10_01; 1,0,0,197; 4-20-2007 13:16:16; /db/atree/library/trees/ce-e10x/src/
#
# Copyright 2007 by Texas Instruments Incorporated.
#
# All rights reserved. Property of Texas Instruments Incorporated.
# Restricted rights to use, duplicate or disclose this code are
# granted through contract.
#
#
#
# ======== xdcpaths.mak ========
# definition of XDC paths and commands
#
# You must set these variables to match your environment. Note that
# BIOS_INSTALL_DIR is only required to build DSP-side servers
# (for multi-core devices) or DSP-side executables (for single core devices).
#CE_INSTALL_DIR = _your_CE_installation_directory_/codec_engine_1_10
#XDC_INSTALL_DIR = _your_XDCTOOLS_installation_directory
#BIOS_INSTALL_DIR = _your_SABIOS_installation_directory/bios_5_31
CE_INSTALL_DIR = /home/davinci/dvevm_1_20/codec_engine_1_10_01
XDC_INSTALL_DIR = /home/davinci/dvevm_1_20/xdc_2_94
BIOS_INSTALL_DIR = /home/davinci/dvevm_1_20/bios_5_31_01
# If you're not building DSP-side content, you should set REQUIRE_BIOS to 0.
REQUIRE_BIOS = 1
ifeq ($(REQUIRE_BIOS), 1)
# BIOS_INSTALL_DIR is the location of your DSP/BIOS installation.
ifeq ($(wildcard $(BIOS_INSTALL_DIR)/packages/ti/bios/package.xdc),)
$(error BIOS_INSTALL_DIR is set to "$(BIOS_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
endif
# CE_INSTALL_DIR is the location of your Codec Engine.
ifeq ($(wildcard $(CE_INSTALL_DIR)/packages/ti/sdo/ce/package.xdc),)
$(error CE_INSTALL_DIR is set to "$(CE_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
# XDC_INSTALL_DIR is the location of your XDCTOOLS installation.
ifeq ($(wildcard $(XDC_INSTALL_DIR)/packages/xdc/package.xdc),)
$(error XDC_INSTALL_DIR is set to "$(XDC_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
# The Codec Engine depends on other packages. Add the paths to those
# other packages here.
#
# Note that some distributions of the Codec Engine include a directory named
# "cetools" which contains these packages. If this script detects
# the existence of that directory, it addes the cetools directory only.
ifeq ($(wildcard $(CE_INSTALL_DIR)/cetools), )
# no cetools directory
#XDAIS_INSTALL_DIR = _your_xDAIS_installation_directory
#DSPLINK_INSTALL_DIR = _your_DSPLink_installation_directory
#CMEM_INSTALL_DIR = _your_CMEM_installation_directory
#FC_INSTALL_DIR = _your_FC_installation_directory
XDAIS_INSTALL_DIR = /home/davinci/dvevm_1_20/xdais_5_10
DSPLINK_INSTALL_DIR = /home/davinci/dvevm_1_20/dsplink_1_30_08_02
CMEM_INSTALL_DIR = /home/davinci/dvevm_1_20/cmem_1_02
FC_INSTALL_DIR = /home/davinci/dvevm_1_20/framework_components_1_10_04
# more validation, just to be sure...
ifeq ($(wildcard $(XDAIS_INSTALL_DIR)/packages/ti/xdais/package.xdc),)
$(error XDAIS_INSTALL_DIR is set to "$(XDAIS_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
ifeq ($(wildcard $(DSPLINK_INSTALL_DIR)/packages/dsplink/gpp/package.xdc),)
$(error DSPLINK_INSTALL_DIR is set to "$(DSPLINK_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
ifeq ($(wildcard $(CMEM_INSTALL_DIR)/packages/ti/sdo/linuxutils/cmem/package.xdc),)
$(error CMEM_INSTALL_DIR is set to "$(CMEM_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
ifeq ($(wildcard $(FC_INSTALL_DIR)/packages/ti/sdo/fc/dskt2/package.xdc),)
$(error FC_INSTALL_DIR is set to "$(FC_INSTALL_DIR)", which is invalid. Set this in <codec engine examples>/xdcpaths.mak! See the build documentation to correct this error.)
endif
MISC_PACKAGES = $(XDAIS_INSTALL_DIR)/packages;$(DSPLINK_INSTALL_DIR)/packages;$(CMEM_INSTALL_DIR)/packages/;$(FC_INSTALL_DIR)/packages
else
MISC_PACKAGES = $(CE_INSTALL_DIR)/cetools/packages
endif
# XDC_PATH is a semi-colon seperated list of package repositories. To
# build this example, it needs to include:
# * Codec Engine examples repository
# * Codec Engine repository ($(CE_INSTALL_DIR)/packages)
# * Codec Engine tools repository ($(CE_INSTALL_DIR)/cetools/packages)
# * BIOS repository ($(BIOS_INSTALL_DIR)/packages), if BIOS_INSTALL_DIR is set
XDC_PATH := $(CE_INSTALL_DIR)/packages;$(MISC_PACKAGES)
ifeq ($(REQUIRE_BIOS), 1)
# if BIOS_INSTALL_DIR is set, add it to the XDC_PATH
XDC_PATH := $(XDC_PATH);$(BIOS_INSTALL_DIR)/packages
endif
#
# @(#) codec_engine_1_10_01; 1,0,0,197; 4-20-2007 13:16:16; /db/atree/library/trees/ce-e10x/src/
#