deepin 编译android 用的ffmpeg库
安装所需要的环境
转自:https://blog.csdn.net/weixin_34323858/article/details/92066194
【1】安装yasm
wget http://www.tortall.net/projects/yasm/releases/yasm-1.3.0.tar.gz
tar zxvf yasm-1.3.0.tar.gz
cd yasm-1.3.0
./configure
make && sudo make install
【2】安装g++ cmake
apt install g++ cmake
【3】安装SDL2-2.0 (这里选择SDL2版本的),用于生成ffplay,否则不会生成ffplay
apt install libsdl2-2.0-0 libsdl2-dev libsdl2-doc
【4】安装fdk-acc
wget https://jaist.dl.sourceforge.net/project/opencore-amr/fdk-aac/fdk-aac-0.1.6.tar.gz
tar xvf fdk-aac-0.1.6.tar.gz
cd fdk-aac-0.1.6
./configure
make && sudo make install
【5】安装lame
wget http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar -xzf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure
make && sudo make install
【6】安装nasm
wget https://www.nasm.us/pub/nasm/releasebuilds/2.13.03/nasm-2.13.03.tar.gz
tar xvf nasm-2.13.03.tar.gz
cd nasm-2.13.03
./configure
make && sudo make install
【7】安装x264视频编解码库
git clone https://code.videolan.org/videolan/x264.git
cd x264
./configure --enable-static --enable-shared --disable-asm --disable-avs
make && sudo make install
【8】安装x265视频编解码库
wget -c http://mirror.yandex.ru/mirrors/ftp.videolan.org/x265/x265_2.6.tar.gz
tar -zxvf x265_2.6.tar.gz
cd /x265_v2.6/build/linux
./make-Makefiles.bash
make && make install
【9】ffmpeg安装
./configure --prefix=/usr/local/ffmpeg --enable-gpl --enable-nonfree --enable-libfdk-aac --enable-libx264 --enable-libx265 --enable-filter=delogo --enable-debug --disable-optimizations --enable-shared --enable-pthreads --enable-version3 --enable-hardcoded-tables --extra-cflags=-I/usr/local/include --extra-ldflags=-L/usr/local/lib
make && make install
【10】配置环境变量
1> 将ffmpeg的lib目录加入到/etc/ld.so.conf中
2> 将ffmpeg的bin目录加入环境变量
3> vim /etc/profile.d/ffmpeg_env.sh 添加如下代码
#set ffmpeg environment
echo 'start to set ffmpeg environment'
if [ -z "$FFMPEG" ]; then
echo 'export $FFMPEG and $PATH...'
export FFMPEG=/usr/local/ffmpeg
export PATH=$FFMPEG/bin:$PATH
fi
4> 执行如下命令,使变量生效
#ldconfig
#source /etc/profile
5>后续编程需要使用/usr/local/ffmpeg中的lib下的so文件,我们还需要进行如下配置
vim /etc/ld.so.conf.d/ffmpeg.ld.conf
在该文件下入
/usr/local/ffmpeg/lib
然后执行
ldconfig
注意:ldconfig 可能不会生效,需要重启系统
当然还有其他方式,比如将so文件拷贝到/usr/bin下,或者创建软连接
注意:如果上述环境配置不对,编译c文件时会出现 【/usr/bin/ld 未发现xxx】
【10】编译
gcc -g -o helloworld helloworld.c -I /usr/local/ffmpeg/include -L /usr/local/ffmpeg/lib -lavutil -lavformat
下载ffmpeg
http://ffmpeg.org/
下载ndk
android-ndk-r10d-linux-x86_64.bin
./android-ndk-r10d-linux-x86_64.bin 安装解压
解压 ffmpeg
tar -xvf ffmpeg-3.1.3.tar.gz
修改configure
由于编译生成动态库文件名的版本号在so的后面,android平台不能识别这样的动态库,因此需要修改一下
打开找到build settings,修对应的宏修改成下面那样
SLIBNAME_WITH_MAJOR='$(SLIBPREF)$(FULLNAME)-$(LIBMAJOR)$(SLIBSUF)'
LIB_INSTALL_EXTRA_CMD='$$(RANLIB) "$(LIBDIR)/$(LIBNAME)"'
SLIB_INSTALL_NAME='$(SLIBNAME_WITH_MAJOR)'
SLIB_INSTALL_LINKS='$(SLIBNAME)'
在根目录下添加build.sh
#!/bin/bash
# 清空上次的编译
make clean
#你自己的NDK路径。
export NDK=/home/toby/Downloads/android-ndk-r10d
# 设置你的android平台编译器的版本 这里采用Android4.0
export SYSROOT=$NDK/platforms/android-21/arch-arm/
#编译使用的toolchain
export TOOLCHAIN=$NDK/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64
export CPU=arm
# 这个是输出的路径
export PREFIX=$(pwd)/android/$CPU
export ADDI_CFLAGS="-marm"
./configure --target-os=linux \
--prefix=$PREFIX --arch=arm \
--disable-doc \
--disable-shared \
--enable-static \
--disable-yasm \
--disable-symver \
--enable-gpl \
--enable-nonfree \
--disable-ffmpeg \
--disable-ffplay \
--disable-ffprobe \
--disable-ffserver \
--disable-doc \
--disable-symver \
--cross-prefix=$TOOLCHAIN/bin/arm-linux-androideabi- \
--enable-cross-compile \
--sysroot=$SYSROOT \
--extra-cflags="-Os -fpic $ADDI_CFLAGS" \
--extra-ldflags="$ADDI_LDFLAGS" $ADDITIONAL_CONFIGURE_FLAG
make clean
make
make install
编译后生成对应的static lib,在新生 成的android目录下
~/Downloads/ffmpeg-3.1.3$ ls android/arm/lib/
libavcodec.a libavdevice.a libavfilter.a libavformat.a libavutil.a libpostproc.a libswresample.a libswscale.a pkgconfig/
编译share lib
--enable-static\
--disable-shared \
修改成
--enable-shared \
--disable-static \
生成的so也在下面(.a与.so在一起)
ffmpeg-3.1.3$ ls android/arm/lib/
libavcodec-57.so libavdevice-57.so libavfilter-6.so libavformat-57.so libavutil-55.so libpostproc-54.so libswresample-2.so libswscale-4.so pkgconfig
libavcodec.a libavdevice.a libavfilter.a libavformat.a libavutil.a libpostproc.a libswresample.a libswscale.a
libavcodec.so libavdevice.so libavfilter.so libavformat.so libavutil.so libpostproc.so libswresample.so libswscale.so
安装ffmpeg到deepin系统中
https://blog.csdn.net/sinat_41559158/article/details/80363649
这里用的ffmepg版本是:
cat RELEASE
4.1.git
./configure --disable-x86asm --enable-shared --prefix=/usr/
make
make install
安装后
ffmpeg -version
ffmpeg version N-93755-ga5387f983d Copyright (c) 2000-2019 the FFmpeg developers
built with gcc 7 (Debian 7.3.0-19)
configuration: --disable-x86asm --enable-shared --prefix=/usr/
libavutil 56. 26.100 / 56. 26.100
libavcodec 58. 52.100 / 58. 52.100
libavformat 58. 27.103 / 58. 27.103
libavdevice 58. 7.100 / 58. 7.100
libavfilter 7. 50.100 / 7. 50.100
libswscale 5. 4.100 / 5. 4.100
libswresample 3. 4.100 / 3. 4.100
用ffplay 01.avi可以播放视频
android studio中添加c++支持
https://www.cnblogs.com/lsdb/p/9337285.html
创建ndk环境支持 c++开发
https://www.jianshu.com/p/0c9922803bba
编译出现问题:
ERROR: Parameter specified as non-null is null: method com.android.build.gradle.internal.cxx.configure.JsonGenerationVariantConfiguration.<init>, parameter ndkVersion
所使用的的NDK版本不适配的问题,高版本的NDK被使用时会被从source.properties文件获取NDK的版本号
你现在使用的NDK版本没有这个文件。俩种解决方案1.升级NDK版本到最新(需要重新编译可能遇到各种问题)。2,临时方案,找到高版本的NDK版本复制source.properties文件到使用的NDK版本中,就可以解决这个问题。
这里采用android studio 默认的值可以避免这个问题,
CMakeLists.txt
设备路径宏
set(distribution_DIR ./armeabi-v7a/)
设置头文件路径
include_directories(include)
动态库:
add_library(
avcodec-57.so
SHARED
IMPORTED)
set_target_properties(
avcodec-57.so
PROPERTIES IMPORTED_LOCATION
${distribution_DIR}/libavcodec.so )
静态库
https://blog.csdn.net/qq_27246079/article/details/90549692
发现按照上面的方法弄了之后有编译不过的情况,各种undefined的情况,先是调整了一下lib的次序
https://blog.csdn.net/wo_Niu123/article/details/81451137
CMakeLists.txt
include_directories(${CMAKE_SOURCE_DIR}/include)
set(my_lib_path ${CMAKE_SOURCE_DIR}/../../../libs/${ANDROID_ABI})
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -L${my_lib_path} -lz")
target_link_libraries( # Specifies the target library.
native-lib
avformat avdevice avcodec avutil swscale avfilter postproc swresample
# Links the target library to the log library
# included in the NDK.
${log-lib} )
还是有,undefined reference to uncompress
之类的出现,修改ffmpeg所用的ndk与android studio的一样,再将编译生成的.a的给android studio去编译
#你自己的NDK路径。
# export NDK=/home/toby/Downloads/android-ndk-r10d
export NDK=/home/toby/Android/Sdk/ndk-bundle
发现是configure参数的问题
https://blog.csdn.net/n66040927/article/details/80995460
在./configure后面添加
--enable-bzlib
变成如下,就编译通过了
#!/bin/bash
# 清空上次的编译
make clean
#你自己的NDK路径。
# export NDK=/home/toby/Downloads/android-ndk-r10d
export NDK=/home/toby/Android/Sdk/ndk-bundle
# 设置你的android平台编译器的版本 这里采用Android4.0
export SYSROOT=$NDK/platforms/android-21/arch-arm/
#编译使用的toolchain
export TOOLCHAIN=$NDK/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86_64
export CPU=arm
# 这个是输出的路径
export PREFIX=$(pwd)/android/$CPU
export ADDI_CFLAGS="-marm"
./configure --target-os=android \
--prefix=$PREFIX --arch=arm \
--disable-doc \
--disable-shared \
--enable-static \
--disable-yasm \
--disable-symver \
--enable-gpl \
--enable-nonfree \
--enable-ffmpeg \
--enable-ffplay \
--enable-ffprobe \
--enable-ffserver \
--enable-doc \
--enable-symver \
--cross-prefix=$TOOLCHAIN/bin/arm-linux-androideabi- \
--enable-cross-compile \
--sysroot=$SYSROOT \
--extra-cflags="-Os -fpic $ADDI_CFLAGS" \
--extra-ldflags="$ADDI_LDFLAGS" $ADDITIONAL_CONFIGURE_FLAG
--enable-bzlib
make clean
make
make install
配置参数帮助说明
./configure --help
/code/ffmpeg-4.0.2$ ./configure --help
Usage: configure [options]
Options: [defaults in brackets after descriptions]
Help options:
--help print this message
--quiet Suppress showing informative output
--list-decoders show all available decoders
--list-encoders show all available encoders
--list-hwaccels show all available hardware accelerators
--list-demuxers show all available demuxers
--list-muxers show all available muxers
--list-parsers show all available parsers
--list-protocols show all available protocols
--list-bsfs show all available bitstream filters
--list-indevs show all available input devices
--list-outdevs show all available output devices
--list-filters show all available filters
Standard options:
--logfile=FILE log tests and output to FILE [ffbuild/config.log]
--disable-logging do not log configure debug information
--fatal-warnings fail if any configure warning is generated
--prefix=PREFIX install in PREFIX [/usr/local]
--bindir=DIR install binaries in DIR [PREFIX/bin]
--datadir=DIR install data files in DIR [PREFIX/share/ffmpeg]
--docdir=DIR install documentation in DIR [PREFIX/share/doc/ffmpeg]
--libdir=DIR install libs in DIR [PREFIX/lib]
--shlibdir=DIR install shared libs in DIR [LIBDIR]
--incdir=DIR install includes in DIR [PREFIX/include]
--mandir=DIR install man page in DIR [PREFIX/share/man]
--pkgconfigdir=DIR install pkg-config files in DIR [LIBDIR/pkgconfig]
--enable-rpath use rpath to allow installing libraries in paths
not part of the dynamic linker search path
use rpath when linking programs (USE WITH CARE)
--install-name-dir=DIR Darwin directory name for installed targets
Licensing options:
--enable-gpl allow use of GPL code, the resulting libs
and binaries will be under GPL [no]
--enable-version3 upgrade (L)GPL to version 3 [no]
--enable-nonfree allow use of nonfree code, the resulting libs
and binaries will be unredistributable [no]
Configuration options:
--disable-static do not build static libraries [no]
--enable-shared build shared libraries [no]
--enable-small optimize for size instead of speed
--disable-runtime-cpudetect disable detecting CPU capabilities at runtime (smaller binary)
--enable-gray enable full grayscale support (slower color)
--disable-swscale-alpha disable alpha channel support in swscale
--disable-all disable building components, libraries and programs
--disable-autodetect disable automatically detected external libraries [no]
Program options:
--disable-programs do not build command line programs
--disable-ffmpeg disable ffmpeg build
--disable-ffplay disable ffplay build
--disable-ffprobe disable ffprobe build
Documentation options:
--disable-doc do not build documentation
--disable-htmlpages do not build HTML documentation pages
--disable-manpages do not build man documentation pages
--disable-podpages do not build POD documentation pages
--disable-txtpages do not build text documentation pages
Component options:
--disable-avdevice disable libavdevice build
--disable-avcodec disable libavcodec build
--disable-avformat disable libavformat build
--disable-swresample disable libswresample build
--disable-swscale disable libswscale build
--disable-postproc disable libpostproc build
--disable-avfilter disable libavfilter build
--enable-avresample enable libavresample build (deprecated) [no]
--disable-pthreads disable pthreads [autodetect]
--disable-w32threads disable Win32 threads [autodetect]
--disable-os2threads disable OS/2 threads [autodetect]
--disable-network disable network support [no]
--disable-dct disable DCT code
--disable-dwt disable DWT code
--disable-error-resilience disable error resilience code
--disable-lsp disable LSP code
--disable-lzo disable LZO decoder code
--disable-mdct disable MDCT code
--disable-rdft disable RDFT code
--disable-fft disable FFT code
--disable-faan disable floating point AAN (I)DCT code
--disable-pixelutils disable pixel utils in libavutil
Individual component options:
--disable-everything disable all components listed below
--disable-encoder=NAME disable encoder NAME
--enable-encoder=NAME enable encoder NAME
--disable-encoders disable all encoders
--disable-decoder=NAME disable decoder NAME
--enable-decoder=NAME enable decoder NAME
--disable-decoders disable all decoders
--disable-hwaccel=NAME disable hwaccel NAME
--enable-hwaccel=NAME enable hwaccel NAME
--disable-hwaccels disable all hwaccels
--disable-muxer=NAME disable muxer NAME
--enable-muxer=NAME enable muxer NAME
--disable-muxers disable all muxers
--disable-demuxer=NAME disable demuxer NAME
--enable-demuxer=NAME enable demuxer NAME
--disable-demuxers disable all demuxers
--enable-parser=NAME enable parser NAME
--disable-parser=NAME disable parser NAME
--disable-parsers disable all parsers
--enable-bsf=NAME enable bitstream filter NAME
--disable-bsf=NAME disable bitstream filter NAME
--disable-bsfs disable all bitstream filters
--enable-protocol=NAME enable protocol NAME
--disable-protocol=NAME disable protocol NAME
--disable-protocols disable all protocols
--enable-indev=NAME enable input device NAME
--disable-indev=NAME disable input device NAME
--disable-indevs disable input devices
--enable-outdev=NAME enable output device NAME
--disable-outdev=NAME disable output device NAME
--disable-outdevs disable output devices
--disable-devices disable all devices
--enable-filter=NAME enable filter NAME
--disable-filter=NAME disable filter NAME
--disable-filters disable all filters
External library support:
Using any of the following switches will allow FFmpeg to link to the
corresponding external library. All the components depending on that library
will become enabled, if all their other dependencies are met and they are not
explicitly disabled. E.g. --enable-libwavpack will enable linking to
libwavpack and allow the libwavpack encoder to be built, unless it is
specifically disabled with --disable-encoder=libwavpack.
Note that only the system libraries are auto-detected. All the other external
libraries must be explicitly enabled.
Also note that the following help text describes the purpose of the libraries
themselves, not all their features will necessarily be usable by FFmpeg.
--disable-alsa disable ALSA support [autodetect]
--disable-appkit disable Apple AppKit framework [autodetect]
--disable-avfoundation disable Apple AVFoundation framework [autodetect]
--enable-avisynth enable reading of AviSynth script files [no]
--disable-bzlib disable bzlib [autodetect]
--disable-coreimage disable Apple CoreImage framework [autodetect]
--enable-chromaprint enable audio fingerprinting with chromaprint [no]
--enable-frei0r enable frei0r video filtering [no]
--enable-gcrypt enable gcrypt, needed for rtmp(t)e support
if openssl, librtmp or gmp is not used [no]
--enable-gmp enable gmp, needed for rtmp(t)e support
if openssl or librtmp is not used [no]
--enable-gnutls enable gnutls, needed for https support
if openssl or libtls is not used [no]
--disable-iconv disable iconv [autodetect]
--enable-jni enable JNI support [no]
--enable-ladspa enable LADSPA audio filtering [no]
--enable-libaom enable AV1 video encoding/decoding via libaom [no]
--enable-libass enable libass subtitles rendering,
needed for subtitles and ass filter [no]
--enable-libbluray enable BluRay reading using libbluray [no]
--enable-libbs2b enable bs2b DSP library [no]
--enable-libcaca enable textual display using libcaca [no]
--enable-libcelt enable CELT decoding via libcelt [no]
--enable-libcdio enable audio CD grabbing with libcdio [no]
--enable-libcodec2 enable codec2 en/decoding using libcodec2 [no]
--enable-libdc1394 enable IIDC-1394 grabbing using libdc1394
and libraw1394 [no]
--enable-libfdk-aac enable AAC de/encoding via libfdk-aac [no]
--enable-libflite enable flite (voice synthesis) support via libflite [no]
--enable-libfontconfig enable libfontconfig, useful for drawtext filter [no]
--enable-libfreetype enable libfreetype, needed for drawtext filter [no]
--enable-libfribidi enable libfribidi, improves drawtext filter [no]
--enable-libgme enable Game Music Emu via libgme [no]
--enable-libgsm enable GSM de/encoding via libgsm [no]
--enable-libiec61883 enable iec61883 via libiec61883 [no]
--enable-libilbc enable iLBC de/encoding via libilbc [no]
--enable-libjack enable JACK audio sound server [no]
--enable-libkvazaar enable HEVC encoding via libkvazaar [no]
--enable-libmodplug enable ModPlug via libmodplug [no]
--enable-libmp3lame enable MP3 encoding via libmp3lame [no]
--enable-libopencore-amrnb enable AMR-NB de/encoding via libopencore-amrnb [no]
--enable-libopencore-amrwb enable AMR-WB decoding via libopencore-amrwb [no]
--enable-libopencv enable video filtering via libopencv [no]
--enable-libopenh264 enable H.264 encoding via OpenH264 [no]
--enable-libopenjpeg enable JPEG 2000 de/encoding via OpenJPEG [no]
--enable-libopenmpt enable decoding tracked files via libopenmpt [no]
--enable-libopus enable Opus de/encoding via libopus [no]
--enable-libpulse enable Pulseaudio input via libpulse [no]
--enable-librsvg enable SVG rasterization via librsvg [no]
--enable-librubberband enable rubberband needed for rubberband filter [no]
--enable-librtmp enable RTMP[E] support via librtmp [no]
--enable-libshine enable fixed-point MP3 encoding via libshine [no]
--enable-libsmbclient enable Samba protocol via libsmbclient [no]
--enable-libsnappy enable Snappy compression, needed for hap encoding [no]
--enable-libsoxr enable Include libsoxr resampling [no]
--enable-libspeex enable Speex de/encoding via libspeex [no]
--enable-libsrt enable Haivision SRT protocol via libsrt [no]
--enable-libssh enable SFTP protocol via libssh [no]
--enable-libtesseract enable Tesseract, needed for ocr filter [no]
--enable-libtheora enable Theora encoding via libtheora [no]
--enable-libtls enable LibreSSL (via libtls), needed for https support
if openssl or gnutls is not used [no]
--enable-libtwolame enable MP2 encoding via libtwolame [no]
--enable-libv4l2 enable libv4l2/v4l-utils [no]
--enable-libvidstab enable video stabilization using vid.stab [no]
--enable-libvmaf enable vmaf filter via libvmaf [no]
--enable-libvo-amrwbenc enable AMR-WB encoding via libvo-amrwbenc [no]
--enable-libvorbis enable Vorbis en/decoding via libvorbis,
native implementation exists [no]
--enable-libvpx enable VP8 and VP9 de/encoding via libvpx [no]
--enable-libwavpack enable wavpack encoding via libwavpack [no]
--enable-libwebp enable WebP encoding via libwebp [no]
--enable-libx264 enable H.264 encoding via x264 [no]
--enable-libx265 enable HEVC encoding via x265 [no]
--enable-libxavs enable AVS encoding via xavs [no]
--enable-libxcb enable X11 grabbing using XCB [autodetect]
--enable-libxcb-shm enable X11 grabbing shm communication [autodetect]
--enable-libxcb-xfixes enable X11 grabbing mouse rendering [autodetect]
--enable-libxcb-shape enable X11 grabbing shape rendering [autodetect]
--enable-libxvid enable Xvid encoding via xvidcore,
native MPEG-4/Xvid encoder exists [no]
--enable-libxml2 enable XML parsing using the C library libxml2 [no]
--enable-libzimg enable z.lib, needed for zscale filter [no]
--enable-libzmq enable message passing via libzmq [no]
--enable-libzvbi enable teletext support via libzvbi [no]
--enable-lv2 enable LV2 audio filtering [no]
--disable-lzma disable lzma [autodetect]
--enable-decklink enable Blackmagic DeckLink I/O support [no]
--enable-libndi_newtek enable Newteck NDI I/O support [no]
--enable-mediacodec enable Android MediaCodec support [no]
--enable-libmysofa enable libmysofa, needed for sofalizer filter [no]
--enable-openal enable OpenAL 1.1 capture support [no]
--enable-opencl enable OpenCL processing [no]
--enable-opengl enable OpenGL rendering [no]
--enable-openssl enable openssl, needed for https support
if gnutls or libtls is not used [no]
--disable-sndio disable sndio support [autodetect]
--disable-schannel disable SChannel SSP, needed for TLS support on
Windows if openssl and gnutls are not used [autodetect]
--disable-sdl2 disable sdl2 [autodetect]
--disable-securetransport disable Secure Transport, needed for TLS support
on OSX if openssl and gnutls are not used [autodetect]
--disable-xlib disable xlib [autodetect]
--disable-zlib disable zlib [autodetect]
The following libraries provide various hardware acceleration features:
--disable-amf disable AMF video encoding code [autodetect]
--disable-audiotoolbox disable Apple AudioToolbox code [autodetect]
--enable-cuda-sdk enable CUDA features that require the CUDA SDK [no]
--disable-cuvid disable Nvidia CUVID support [autodetect]
--disable-d3d11va disable Microsoft Direct3D 11 video acceleration code [autodetect]
--disable-dxva2 disable Microsoft DirectX 9 video acceleration code [autodetect]
--disable-ffnvcodec disable dynamically linked Nvidia code [autodetect]
--enable-libdrm enable DRM code (Linux) [no]
--enable-libmfx enable Intel MediaSDK (AKA Quick Sync Video) code via libmfx [no]
--enable-libnpp enable Nvidia Performance Primitives-based code [no]
--enable-mmal enable Broadcom Multi-Media Abstraction Layer (Raspberry Pi) via MMAL [no]
--disable-nvdec disable Nvidia video decoding acceleration (via hwaccel) [autodetect]
--disable-nvenc disable Nvidia video encoding code [autodetect]
--enable-omx enable OpenMAX IL code [no]
--enable-omx-rpi enable OpenMAX IL code for Raspberry Pi [no]
--enable-rkmpp enable Rockchip Media Process Platform code [no]
--disable-v4l2-m2m disable V4L2 mem2mem code [autodetect]
--disable-vaapi disable Video Acceleration API (mainly Unix/Intel) code [autodetect]
--disable-vdpau disable Nvidia Video Decode and Presentation API for Unix code [autodetect]
--disable-videotoolbox disable VideoToolbox code [autodetect]
Toolchain options:
--arch=ARCH select architecture []
--cpu=CPU select the minimum required CPU (affects
instruction selection, may crash on older CPUs)
--cross-prefix=PREFIX use PREFIX for compilation tools []
--progs-suffix=SUFFIX program name suffix []
--enable-cross-compile assume a cross-compiler is used
--sysroot=PATH root of cross-build tree
--sysinclude=PATH location of cross-build system headers
--target-os=OS compiler targets OS []
--target-exec=CMD command to run executables on target
--target-path=DIR path to view of build directory on target
--target-samples=DIR path to samples directory on target
--tempprefix=PATH force fixed dir/prefix instead of mktemp for checks
--toolchain=NAME set tool defaults according to NAME
(gcc-asan, clang-asan, gcc-msan, clang-msan,
gcc-tsan, clang-tsan, gcc-usan, clang-usan,
valgrind-massif, valgrind-memcheck,
msvc, icl, gcov, llvm-cov, hardened)
--nm=NM use nm tool NM [nm -g]
--ar=AR use archive tool AR [ar]
--as=AS use assembler AS []
--ln_s=LN_S use symbolic link tool LN_S [ln -s -f]
--strip=STRIP use strip tool STRIP [strip]
--windres=WINDRES use windows resource compiler WINDRES [windres]
--x86asmexe=EXE use nasm-compatible assembler EXE [nasm]
--cc=CC use C compiler CC [gcc]
--cxx=CXX use C compiler CXX [g++]
--objcc=OCC use ObjC compiler OCC [gcc]
--dep-cc=DEPCC use dependency generator DEPCC [gcc]
--nvcc=NVCC use Nvidia CUDA compiler NVCC [nvcc]
--ld=LD use linker LD []
--pkg-config=PKGCONFIG use pkg-config tool PKGCONFIG [pkg-config]
--pkg-config-flags=FLAGS pass additional flags to pkgconf []
--ranlib=RANLIB use ranlib RANLIB [ranlib]
--doxygen=DOXYGEN use DOXYGEN to generate API doc [doxygen]
--host-cc=HOSTCC use host C compiler HOSTCC
--host-cflags=HCFLAGS use HCFLAGS when compiling for host
--host-cppflags=HCPPFLAGS use HCPPFLAGS when compiling for host
--host-ld=HOSTLD use host linker HOSTLD
--host-ldflags=HLDFLAGS use HLDFLAGS when linking for host
--host-libs=HLIBS use libs HLIBS when linking for host
--host-os=OS compiler host OS []
--extra-cflags=ECFLAGS add ECFLAGS to CFLAGS []
--extra-cxxflags=ECFLAGS add ECFLAGS to CXXFLAGS []
--extra-objcflags=FLAGS add FLAGS to OBJCFLAGS []
--extra-ldflags=ELDFLAGS add ELDFLAGS to LDFLAGS []
--extra-ldexeflags=ELDFLAGS add ELDFLAGS to LDEXEFLAGS []
--extra-ldsoflags=ELDFLAGS add ELDFLAGS to LDSOFLAGS []
--extra-libs=ELIBS add ELIBS []
--extra-version=STRING version string suffix []
--optflags=OPTFLAGS override optimization-related compiler flags
--nvccflags=NVCCFLAGS override nvcc flags [-gencode arch=compute_30,code=sm_30 -O2]
--build-suffix=SUFFIX library name suffix []
--enable-pic build position-independent code
--enable-thumb compile for Thumb instruction set
--enable-lto use link-time optimization
--env="ENV=override" override the environment variables
Advanced options (experts only):
--malloc-prefix=PREFIX prefix malloc and related names with PREFIX
--custom-allocator=NAME use a supported custom allocator
--disable-symver disable symbol versioning
--enable-hardcoded-tables use hardcoded tables instead of runtime generation
--disable-safe-bitstream-reader
disable buffer boundary checking in bitreaders
(faster, but may crash)
--sws-max-filter-size=N the max filter size swscale uses [256]
Optimization options (experts only):
--disable-asm disable all assembly optimizations
--disable-altivec disable AltiVec optimizations
--disable-vsx disable VSX optimizations
--disable-power8 disable POWER8 optimizations
--disable-amd3dnow disable 3DNow! optimizations
--disable-amd3dnowext disable 3DNow! extended optimizations
--disable-mmx disable MMX optimizations
--disable-mmxext disable MMXEXT optimizations
--disable-sse disable SSE optimizations
--disable-sse2 disable SSE2 optimizations
--disable-sse3 disable SSE3 optimizations
--disable-ssse3 disable SSSE3 optimizations
--disable-sse4 disable SSE4 optimizations
--disable-sse42 disable SSE4.2 optimizations
--disable-avx disable AVX optimizations
--disable-xop disable XOP optimizations
--disable-fma3 disable FMA3 optimizations
--disable-fma4 disable FMA4 optimizations
--disable-avx2 disable AVX2 optimizations
--disable-avx512 disable AVX-512 optimizations
--disable-aesni disable AESNI optimizations
--disable-armv5te disable armv5te optimizations
--disable-armv6 disable armv6 optimizations
--disable-armv6t2 disable armv6t2 optimizations
--disable-vfp disable VFP optimizations
--disable-neon disable NEON optimizations
--disable-inline-asm disable use of inline assembly
--disable-x86asm disable use of standalone x86 assembly
--disable-mipsdsp disable MIPS DSP ASE R1 optimizations
--disable-mipsdspr2 disable MIPS DSP ASE R2 optimizations
--disable-msa disable MSA optimizations
--disable-mipsfpu disable floating point MIPS optimizations
--disable-mmi disable Loongson SIMD optimizations
--disable-fast-unaligned consider unaligned accesses slow
Developer options (useful when working on FFmpeg itself):
--disable-debug disable debugging symbols
--enable-debug=LEVEL set the debug level []
--disable-optimizations disable compiler optimizations
--enable-extra-warnings enable more compiler warnings
--disable-stripping disable stripping of executables and shared libraries
--assert-level=level 0(default), 1 or 2, amount of assertion testing,
2 causes a slowdown at runtime.
--enable-memory-poisoning fill heap uninitialized allocated space with arbitrary data
--valgrind=VALGRIND run "make fate" tests through valgrind to detect memory
leaks and errors, using the specified valgrind binary.
Cannot be combined with --target-exec
--enable-ftrapv Trap arithmetic overflows
--samples=PATH location of test samples for FATE, if not set use
$FATE_SAMPLES at make invocation time.
--enable-neon-clobber-test check NEON registers for clobbering (should be
used only for debugging purposes)
--enable-xmm-clobber-test check XMM registers for clobbering (Win64-only;
should be used only for debugging purposes)
--enable-random randomly enable/disable components
--disable-random
--enable-random=LIST randomly enable/disable specific components or
--disable-random=LIST component groups. LIST is a comma-separated list
of NAME[:PROB] entries where NAME is a component
(group) and PROB the probability associated with
NAME (default 0.5).
--random-seed=VALUE seed value for --enable/disable-random
--disable-valgrind-backtrace do not print a backtrace under Valgrind
(only applies to --disable-optimizations builds)
--enable-osfuzz Enable building fuzzer tool
--libfuzzer=PATH path to libfuzzer
--ignore-tests=TESTS comma-separated list (without "fate-" prefix
in the name) of tests whose result is ignored
--enable-linux-perf enable Linux Performance Monitor API
NOTE: Object files are built at the place where configure is launched.