Zuken E3.series schematic/cable/Formboard 连载（2）

Zuken E3.series schematic/cable/Formboard 连载（1）-CSDN博客

Zuken E3.series schematic/cable/Formboard 连载（2）-CSDN博客

Zuken E3.series schematic/cable/Formboard 连载（3）_-CSDN博客

Zuken E3.series schematic/cable/Formboard 连载（4）-CSDN博客

Zuken E3.series schematic/cable/Formboard 连载（5）-CSDN博客

Zuken E3.series schematic/cable/Formboard 连载（6）-CSDN博客

A guided tour through E3.series:

• Getting Acquainted with the Fundamentals of the E3.series User Interface

• E3.schematic for Electrical Engineering

• E3.panel for Panel Wiring and Construction

• E3.cable for the Cabling of Devices

• E3.cable for the Cabling of Vehicles

• Creation of Symbols and Components with the E3.series Component Editor

The following start-up parameters are available:

Parameter	Description
<file name>	After starting the programme the defined file will be opened.
/cable	The CABLE module will be started. This functionality will also be used, if nothing has been specified. (Excepts use of /schema or /logic.)
/cable /fluid	Starts the E3.fluidPlus module.
/cable /fluid /sp	Starts the E3.fluidPlusSmallProject module. Number of sheets limited to 30 per project.
/compareconfigfile	Indicates the path where the configuration file is located. Format: [.ini] Note: This start up parameter is necessary for the functionality 'Compare Projects'.
/comparenewfile	Indicates the path where the new E3.series project is located. Format: [.e3s] Note: This start up parameter is necessary for the functionality 'Compare Projects'.
/compareoldfile	Indicates the path where the old E3.series project is located. Format: [.e3s] Note: This start up parameter is necessary for the functionality 'Compare Projects'.
/dbe	E3.series will be started in Database Editor mode.
/demo	The demo version will be started.
/distdesign	E3.series will be started with the Distributed Design functionality.
/fluid	Starts the E3.fluidPlus module.
/fluid /sb	Starts the E3.fluidPlusSmallProject module. Number of sheets limited to 30 per project.
/formboard	The FORMBOARD module will be started.
/functionaldesign	Starts the E3.functionaldesign module.
/InprocRegOnly	Writes the COM classes for the COM Interface to the Registry.
/level	Enables the Levels dialogue being activated in E3.view. (Only in combination with /view.)
/logic	The LOGIC module will be started. (Excepts use of /schema or /cable.)
/mucreate	After starting the programme the dialogue to create a new multi-user project will be opened. (Only in combination with /multiuser.)
/multiuser	The programme will be started with multi-user functionality. (Only in combination with /cable (or nothing) or /schema but not with /sp.)
/muopen	After starting the programme the defined multi-user project will directly be opened. (Only in combination with /multiuser.)
/muopen <project name>	After starting the programme the dialogue to open a multi-user project will be opened. (Only in combination with /multiuser.)
/new	After starting the programme a new project will immediately be created and opened.
/nocgm	E3.series will be started without CGM export functionality, even if the appropriate licence is available.
/nodbe	E3.series will be started without the Database Editor.
/noexportexf	E3.series will be started without EXF export functionality, even if the appropriate licence is available.
/noimportruplan	E3.series will be started without Ruplan import functionality, even if the appropriate licence is available.
/noimportstep	E3.series will be started without STEP import functionality, even if the appropriate licence is available.
/nomilstandard	E3.series will be started without the MIL-Standard functionality.
/nopanel	E3.series will be started without the Panel placing functionality, even if the appropriate licence is available. Trees, that contain models only, are not displayed with the start-up parameter /nopanel or without panel licence. Models are not displayed in any tree with the start-up parameter /nopanel or without panel licence. With the start-up parameter /nopanel or without panel licence, entry fields for models are missing in the Tree Control Properties.... The entry fields for sheets and fields are moved upward.
/nopdf	E3.series will be started without PDF export functionality, even if the appropriate licence is available.
/noplugin	No Plug-Ins loaded when starting the programme.
/nosplash	The start display screen will not be displayed.
/nowire	E3.series will be started without the Panel wiring functionality, even if the appropriate licence is available.
/noxvl	E³.series will be started without XVL-Export functionality, even if the appropriate licence is available.
/plus	The programme will be started with the viewPlus functionality. (Only in combination with /view.)
/redliner	E3.redliner will be started. It corresponds to E3.viewPlus but contains enhanced functionality.
/Register	E3.series will be started and the COM classes for the COM Interface are registered.
/sb	see /sp
/schema	The SCHEMA module will be started. (Excepts use of /cable or /logic.)
/schema /fluid	Starts the E3.fluid module
/schema /fluid /sp	Starts the E3.fluidSmallProject module. Number of sheets limited to 30 per project.
/sp	The defined module will be started as SmallProject version. Limitation of the number of sheets to 30 sheets a project. (Only in combination with /cable (or nothing) or /schema.) There is an additional start-up parameter /sheets for assigning licences with different numbers of sheets using the licence server for the module E3.SmallProject. The parameter /sheets must be added to the start-up parameter /sp (for E3.SmallProject) followed by the corresponding number nnn of sheets For example:/sp /sheets 20). Note: For this functionality to work ECADLM Version 11.14.1.1 or higher must be used! When specifying a sheet number, a licence with the exact number of sheets must be available. Without a specified number of sheets any licence may be used along with its number of sheets. If no sheet number is specified, the default value is used for the licence (30 sheets).
/startup	/startup="<VBS script with complete path definition>" After starting the programme, the defined script is immediately run. " are necessary in case blank characters are contained in the directory.
/student	The student version will be started.
/topology	The TOPOLOGY module will be started. (Excludes usage of /functionaldesign.)
/Unregister	COM classes for the COM Interfaces are unregistered. When an error occurs or when the (un)registration is done without the required administrator rights, the following error message appears: "Error while registering COM Classes."
/view	The programme will be started with the viewer functionality.
/view /plus	E3.viewPlus will be started. It corresponds to E3.view but contains enhanced functionality.
/Workspace=<configuration>	E3.series will be started directly with previously saved workspace configuration. (This configuration can be defined in View -> Workspace Configurations.)