Android TV 桌面图标闪

本文档详细列出了AndroidTV设备的系统设置,包括音量键声音支持、音频通知、UI模式、屏幕尺寸限制、电源按钮行为等,强调了针对电视平台的特殊调整。
摘要由CSDN通过智能技术生成
<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2014 The Android Open Source Project

     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at

         http://www.apache.org/licenses/LICENSE-2.0

     Unless required by applicable law or agreed to in writing, software
     distributed under the License is distributed on an "AS IS" BASIS,
     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
     See the License for the specific language governing permissions and
     limitations under the License.
-->

<resources>
    <!-- Flag indicating that the media framework should support playing of sounds on volume
         key usage.  This adds noticeable additional overhead to volume key processing, so
         is disableable for products for which it is irrelevant. -->
    <bool name="config_useVolumeKeySounds">false</bool>

    <!-- Disable AUDIO_BECOMING_NOISY notifications. -->
    <bool name="config_sendAudioBecomingNoisy">false</bool>

    <!-- This device is data-only. -->
    <bool name="config_voice_capable">false</bool>

    <!-- This device does not allow sms service. -->
    <bool name="config_sms_capable">false</bool>

    <!-- This device does not support mobile data. -->
    <bool name="config_mobile_data_capable">false</bool>

    <!-- Control the default UI mode type to use when there is no other type override
         happening.  One of the following values (See Configuration.java):
             1  UI_MODE_TYPE_NORMAL
             4  UI_MODE_TYPE_TELEVISION
             5  UI_MODE_TYPE_APPLIANCE
         Any other values will have surprising consequences. -->
    <integer name="config_defaultUiModeType">4</integer>

    <!--  Control whether to lock UI mode to what is selected from config_defaultUiModeType.
          Once UI mode is locked, applications cannot change it anymore. -->
    <bool name="config_lockUiMode">true</bool>

    <!-- Control the default night mode to use when there is no other mode override set.
         One of the following values (see UiModeManager.java):
             0 - MODE_NIGHT_AUTO
             1 - MODE_NIGHT_NO
             2 - MODE_NIGHT_YES
    -->
    <integer name="config_defaultNightMode">2</integer>

    <!-- default device has recents property -->
    <bool name="config_hasRecents">false</bool>

    <!-- Control the behavior when the user long presses the home button.
            0 - Nothing
            1 - Launch all apps intent
            2 - Launch assist intent
            3 - Launch notification panel
         This needs to match the constants in
         policy/src/com/android/internal/policy/impl/PhoneWindowManager.java
    -->
    <integer name="config_longPressOnHomeBehavior">1</integer>

    <!-- Override configuration check for dpad so that we always appear to have one -->
    <bool name="config_hasPermanentDpad">true</bool>

    <bool name="config_defaultInTouchMode">false</bool>

    <!-- Launcher customization requires AppWidgetService, but otherwise
         home screen widgets are not supported on TV -->
    <bool name="config_enableAppWidgetService">true</bool>

    <!-- Whether to keep background restricted profiles running after exiting. If set to false,
         restricted profiles may be put into stopped state as soon as the switch back to primary
         happens.
         Can be overridden with android.provider.Settings.Global.KEEP_PROFILE_IN_BACKGROUND. -->
    <bool name="config_keepRestrictedProfilesInBackground">false</bool>

    <!-- Enable doze mode -->
    <bool name="config_enableAutoPowerModes">true</bool>
    <bool name="config_autoPowerModeUseMotionSensor">false</bool>

    <!-- True if the device supports split screen as a form of multi-window. -->
    <bool name="config_supportsSplitScreenMultiWindow">false</bool>

    <!-- Whether the device supports quick settings and its associated APIs -->
    <bool name="config_quickSettingsSupported">false</bool>

    <!-- True if the device supports system decorations on secondary displays. -->
    <bool name="config_supportsSystemDecorsOnSecondaryDisplays">false</bool>

    <!-- Enable assistant to show in front of the dream/screensaver. -->
    <bool name="config_assistantOnTopOfDream">true</bool>

    <!-- Maximum size, specified in pixels, to restrain the display space width to. Height and
         density will be scaled accordingly to maintain aspect ratio. A value of 0 indicates no
         constraint will be enforced.
         We limit the UI graphics width to 1920 because higher resolution is unnecessary and causes
         too much overhead on the GPU for Android TV devices. -->
    <integer name="config_maxUiWidth">1920</integer>

    <!-- If true, enables verification of the lockscreen credential in the factory reset protection
        flow. This should be true if gatekeeper / weaver credentials can still be checked after a
        factory reset. -->
    <bool name="config_enableCredentialFactoryResetProtection">false</bool>

    <!-- Control the behavior when the user long presses the power button.
        0 - Nothing
        1 - Global actions menu
        2 - Power off (with confirmation)
        3 - Power off (without confirmation)
        4 - Go to voice assist
        5 - Go to assistant (Settings.Secure.ASSISTANT -->
    <integer name="config_longPressOnPowerBehavior">1</integer>

    <!-- Whether the time zone detection feature is enabled. Disabled for ATV devices. -->
    <bool name="config_enableGeolocationTimeZoneDetection" translatable="false">false</bool>

    <!-- Whether this device is supporting the microphone toggle -->
    <bool name="config_supportsMicToggle">true</bool>
    <!-- Whether this device is supporting the camera toggle -->
    <bool name="config_supportsCamToggle">true</bool>
</resources>

Android TV UI闪,需要over以上属性配置

  • 1
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 1
    评论
### 回答1: Android Studio的桌面图标是指在桌面上显示的快捷方式图标。如果您已经安装了Android Studio,但是没有在桌面上看到它的图标,您可以按照以下步骤来创建一个桌面图标: 1. 打开Android Studio应用程序。 2. 在菜单栏中,选择“Tools”(工具)>“Create Desktop Entry”(创建桌面条目)。 3. 在弹出的窗口中,选择“Create”(创建)。 4. 现在,您应该能够在桌面上看到一个新的Android Studio图标。 如果您使用的是Linux操作系统,可能需要手动创建一个桌面图标。在这种情况下,您可以按照以下步骤操作: 1. 打开文本编辑器,创建一个新文件。 2. 将以下内容复制并粘贴到文件中: [Desktop Entry] Version=1. Type=Application Name=Android Studio Icon=/path/to/android-studio/bin/studio.png Exec="/path/to/android-studio/bin/studio.sh" %f Comment=The Integrated Development Environment for Android app development Categories=Development;IDE; Terminal=false StartupWMClass=jetbrains-android-studio 请注意,您需要将“/path/to/android-studio”替换为您的Android Studio安装路径。 3. 将文件保存为“android-studio.desktop”。 4. 将文件移动到“/usr/share/applications/”目录中。 5. 现在,您应该能够在桌面上看到一个新的Android Studio图标。 ### 回答2: Android Studio 是一款非常流行的 Android 应用开发工具,它是由 Google 投资和开发的一款强大的集成开发环境(IDE),帮助开发者创建高质量的 Android 应用程序。对于很多 Android 开发者而言,安装了 Android Studio 之后,他们就会想要在其对应的操作系统桌面环境下放置一个图标以便于使用。 Android Studio 桌面图标的创建及使用方法是十分简单的,我们可以仿照其他软件创建桌面快捷方式的方式进行操作。首先在 Android Studio 安装目录下的 bin 目录,找到 studio.exe 文件,右键选择“发送到”,然后选择“桌面快捷方式”即可完成创建操作。之后我们就可以在操作系统的桌面上找到 Android Studio 的图标了。 如果在某些操作系统环境中,无法直接创建桌面快捷方式,那么我们可以手动创建一个快捷方式,将其拖拽到桌面上,从而完成 Android Studio 桌面图标的创建操作。在Windows操作系统中,我们可以右键单击studio.exe文件,选择发送到“桌面(快捷方式)”\;在Mac操作系统中,我们可以右键单击studio.exe文件,选择“创建别名”,并将别名拖放到桌面上以完成操作。此外,使用者也可以很方便地在Web搜索引擎上搜索相关关键词,查阅更为详尽的技术介绍。 ### 回答3: Android Studio是一个为Android开发者设计的集成开发环境(IDE)。它能够帮助开发者在Android平台上构建高质量的应用程序。通过使用Android Studio,开发者可以使用Java或Kotlin编程语言来构建Android应用程序。 当我们安装好Android Studio后,通常会在桌面上出现一个图标。点击这个图标便可以打开Android Studio。默认情况下,这个桌面图标会安装在操作系统的程序菜单中,在运行时会在任务栏中显示。 除了使用桌面图标,也可以通过在终端运行“studio.sh”命令来打开Android Studio。 如果您希望在桌面上创建Android Studio的快捷方式,可以通过以下步骤实现: 1.右键单击桌面并选择“创建新文件夹”。您可以将此文件夹命名为“Android Studio”。 2.在“Android Studio”文件夹内右键单击并选择“创建启动器”。 3.在“创建启动器”窗口中,输入以下信息: -名称:Android Studio -命令:/ home / <USER_NAME> / android-studio / bin / studio.sh(<USER_NAME>是您的用户名) 4.单击“应用”按钮以完成创建过程。 现在,您可以双击桌面上的快捷方式,打开Android Studio并开始开发您的Android应用程序。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 1
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值