CISCO 3台路由器静态路由



CISCO 3台路由器静态路由
实验目的：
源：LO:192.168.0.1 ping 目的：LO：192.168.3.1
拓扑

接口配置

R1

interface Loopback0

 ipaddress 192.168.0.1 255.255.255.0

interface Serial1/0

 ipaddress 192.168.1.1 255.255.255.0

R2

interface Serial1/0

 ipaddress 192.168.1.2 255.255.255.0

interface Serial1/1

 ipaddress 192.168.2.1 255.255.255.0

R3

interface Loopback0

 ip address 192.168.3.1255.255.255.0

interface Serial1/1

 ip address 192.168.2.2255.255.255.0

路由配置

R1

ip route 192.168.2.0 255.255.255.0 192.168.1.2  \\到R2去的路由

ip route 192.168.3.0 255.255.255.0 192.168.1.2  \\到R3去的路由

R2

ip route 0.0.0.0 0.0.0.0 192.168.1.1             \\到R1的返回路由

ip route 192.168.3.0 255.255.255.0 192.168.2.2   \\到R3的路由

R3

ip route 0.0.0.0 0.0.0.0 192.168.2.1             \\只用一条返回路由就可以

查看路由表

R1#show ip route

Codes: C - connected, S - static, R - RIP,M - mobile, B - BGP

      D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

      N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

      E1 - OSPF external type 1, E2 - OSPF external type 2

      i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

      ia - IS-IS inter area, * - candidate default, U - per-user static route

      o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

C   192.168.0.0/24 is directly connected, Loopback0

C   192.168.1.0/24 is directly connected, Serial1/0

S   192.168.2.0/24 [1/0] via 192.168.1.2

S   192.168.3.0/24 [1/0] via 192.168.1.2

 

R2#show ip route

Codes: C - connected, S - static, R - RIP,M - mobile, B - BGP

      D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

      N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

      E1 - OSPF external type 1, E2 - OSPF external type 2

      i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

      ia - IS-IS inter area, * - candidate default, U - per-user static route

      o - ODR, P - periodic downloaded static route

Gateway of last resort is 192.168.1.1 tonetwork 0.0.0.0

C   192.168.1.0/24 is directly connected, Serial1/0

C   192.168.2.0/24 is directly connected, Serial1/1

S   192.168.3.0/24 [1/0] via 192.168.2.2

S*  0.0.0.0/0 [1/0] via 192.168.1.1

R3#show ip route

Codes: C - connected, S - static, R - RIP,M - mobile, B - BGP

      D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

      N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

      E1 - OSPF external type 1, E2 - OSPF external type 2

      i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

      ia - IS-IS inter area, * - candidate default, U - per-user static route

      o - ODR, P - periodic downloaded static route

Gateway of last resort is 192.168.2.1 tonetwork 0.0.0.0

C   192.168.2.0/24 is directly connected, Serial1/1

C   192.168.3.0/24 is directly connected, Loopback0

S*  0.0.0.0/0 [1/0] via 192.168.2.1

 

测试：

R1#ping 192.168.3.1 source 192.168.0.1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to192.168.3.1, timeout is 2 seconds:

Packet sent with a source address of192.168.0.1

!!!!!

Success rate is 100 percent (5/5),round-trip min/avg/max = 60/68/92 ms

R3#ping 192.168.0.1 source 192.168.3.1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to192.168.0.1, timeout is 2 seconds:

Packet sent with a source address of192.168.3.1

!!!!!

Success rate is 100 percent (5/5),round-trip min/avg/max = 56/68/92 ms