添加Onvif设备到Blue IRIS步骤

 

1.右键，“New Camera” :

 

2. 以下步骤，以此填写参数，最后单击按钮"Find/inspect"

 

3. 弹出对话框Inspecting对话框， 输入参数正确的话，会获取以下信息。

Opening 192.168.1.44 port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2018-11-02T02:34:11.000Z
Requesting device information...
Manufacturer: HIKVISION
Model: DS-2ZMN2007(C)
FirmwareVersion: V5.4.0 build 160418
GetCapabilities...
Querying services
Has Search services: /onvif/SearchRecording
Has Imaging services: /onvif/Imaging
Has media services: /onvif/Media
Has RTP_RTSP_TCP, requesting profiles
first profile is Profile_1
first source is VideoSource_1
requesting URI for profile Profile_1
RTSP URI: /Streaming/Channels/101?transportmode=unicast&profile=Profile_1
Has Event services: /onvif/Events
Has WSPullPointSupport
RelayOutputs: 1
RelayOutput: AlarmOut_0/Bistable/closed
InputConnectors: 1
Has Device IO services: /onvif/DeviceIO
AudioOutputs: 1
AudioOutput: AudioOutputToken
Has PTZ service: /onvif/PTZ
Preset: 1=
.....此处省略
Done

 

4. CloseInspecting对话框， 然后一路确认或OK键，最后显示如下：

 

5. Done