如何让Fiddler2监视安卓模拟器

CONFIGURING FIDDLER

First we need to configure Fiddler to accept traffic from the emulator. In this case I am running Fiddler on the machine that is also hosting the emulator.

 

1. Start Fiddler

 

2. Go to Tools, then Fiddler Options

Figure: Going to Tools –> Fidler Options

 

3. Configure General and Connections tabs to look like the ones below:

Figure: The General tab’s settings

 

Figure: The Connections tab’s settings

 

4. Click OK

 

5. Quit and Relaunch Fiddler (important!)

 

6. Enable the Streaming feature in Fiddler so HTTP requests are shown as they occur.

 

 

 

 

CONFIGURING THE EMULATOR

1. Start the emulator

 

2. Go to Settings, then Wireless controls

 

3. Tap Mobile networks

 

4. Select Access point names

 

Figure: Access point names option

 

5. Choose the selected access point and configure the following options:

- Name : Internet

- APN : Internet 

- Proxy : Fiddler’s proxy IP address (10.0.1.26 in my case. Use cmd.exe then "ipconfig" to see your IP address ) 

- Port : Fiddler’s proxy IP port (8888)

- Username : <Not set> (clear it if anything is already there) 

- Password : <Not set> (clear it if anything is already there)

- MCC : 310 

- MNC : 260

Don’t play with any of the other settings!

 

6. Press MENU and then press Save

 

7. Keep going back until you’re at the home screen. I don’t know if this makes a difference, but I’m just making sure…

 

8. Try loading a Web site and you should see the traffic in Fiddler.

 

Figure: Web traffic still works, but is flowing through Fiddler.

 

 

Figure: Traffic being captured in Fiddler.

 

That should do it!

 

Note: You may need to disable Windows Firewall to make this work. Obviously I don’t need to tell you not to do this on a public network.