matlab保存矢量图，保持输出图片尺寸大小与可视一致

set(0,'DefaultFigureColor','w');
set(0,'DefaultFigureInvertHardcopy','off');
% set(0,'DefaultFigurePaperPosition',[-2,0.05,15.2,8.4])
set(0,'DefaultFigurePaperSize',[15.2,8.4])
set(0,'DefaultFigurePaperPositionMode','auto');
% set(0,'DefaultFigurePaperOrientation','landscape')
set(0,'DefaultTextInterpreter','tex');
set(0,'DefaultFigureColor','w');
set(0,'DefaultFigureInvertHardcopy','off');
% set(0,'DefaultFigurePaperPosition',[-2,0.05,15.2,8.4])
set(0,'DefaultFigurePaperSize',[15.2,8.4])
set(0,'DefaultFigurePaperPositionMode','auto');
% set(0,'DefaultFigurePaperOrientation','landscape')
set(0,'DefaultTextInterpreter','tex');

 

在startup中添加上述内容，

paperposition 用于调整eps文件大小，图片在整个图中的位置，left bottom width height

Papersize 保证输出pdf不被裁切，paperposition的前两项对pdf也有效。

paperpositionmode 设置为auto，保证jpg等位图输出与实际窗口一样

 

如果不在startup中添加，直接在程序里调整也是一样的，

set(gcf,'papersize',[15.2,8.4])

set(gcf,'paperposition',[-2,0.05,15.2,8.4])