centos系统下RabbitMQ安装教程

centos系统下RabbitMQ安装教程
我这里的环境用的腾讯云的轻应用环境

RabbitMQ是一个开源的遵循AMQP协议实现的基于Erlang语言编写，即需要先安装部署Erlang环境再安装RabbitMQ环境。需加注意的是，读者若不想跟着我的版本号下载安装，可根据两者版本号的对应表进行下载，安装相应版本的Erlang和RabbitMQ，只需在下文修改命令里面的版本号即可，如下:
一 Erlang下载安装
在确定了RabbitMQ版本号后，先下载安装Erlang环境。
相关网站

https://packagecloud.io/rabbitmq/rabbitmq-server

wget --content-disposition https://packagecloud.io/rabbitmq/erlang/packages/el/7/erlang-22.3.4.12-1.el7.x86_64.rpm/download.rpm

[root@VM-8-17-centos new]# wget --content-disposition https://packagecloud.io/rabbitmq/rabbitmq-server/packages/el/7/rabbitmq-server-3.8.13-1.el7.noarch.rpm/download.rpm
--2022-11-27 22:54:52--  https://packagecloud.io/rabbitmq/rabbitmq-server/packages/el/7/rabbitmq-server-3.8.13-1.el7.noarch.rpm/download.rpm
Resolving packagecloud.io (packagecloud.io)... 52.52.36.226, 54.183.55.100, 2600:1f1c:2e5:6900:6ede:11a0:5db3:4dfb, ...
Connecting to packagecloud.io (packagecloud.io)|52.52.36.226|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://d28dx6y1hfq314.cloudfront.net/828/1033/el/7/package_files/1305009.rpm?t=1669561193_b7657897acf0012634d1db181f00c0b527f201b8 [following]
--2022-11-27 22:54:53--  https://d28dx6y1hfq314.cloudfront.net/828/1033/el/7/package_files/1305009.rpm?t=1669561193_b7657897acf0012634d1db181f00c0b527f201b8
Resolving d28dx6y1hfq314.cloudfront.net (d28dx6y1hfq314.cloudfront.net)... 13.225.95.31, 13.225.95.224, 13.225.95.111, ...
Connecting to d28dx6y1hfq314.cloudfront.net (d28dx6y1hfq314.cloudfront.net)|13.225.95.31|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 15836454 (15M) [application/x-rpm]
Saving to: ‘rabbitmq-server-3.8.13-1.el7.noarch.rpm’

100%[============================================================================================>] 15,836,454  13.5MB/s   in 1.1s   

2022-11-27 22:54:55 (13.5 MB/s) - ‘rabbitmq-server-3.8.13-1.el7.noarch.rpm’ saved [15836454/15836454]

接着，安装已下载的rpm包

yum localinstall erlang-22.3.4.12-1.el7.x86_64.rpm

[root@VM-8-17-centos new]# yum localinstall erlang-22.3.4.12-1.el7.x86_64.rpm
Loaded plugins: fastestmirror, langpacks
Repository epel is listed more than once in the configuration
Examining erlang-22.3.4.12-1.el7.x86_64.rpm: erlang-22.3.4.12-1.el7.x86_64
Marking erlang-22.3.4.12-1.el7.x86_64.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package erlang.x86_64 0:22.3.4.12-1.el7 will be installed
--> Finished Dependency Resolution
rabbitmq_erlang/x86_64/signature                                                                               |  833 B  00:00:00     
rabbitmq_erlang/x86_64/signature                                                                               | 1.8 kB  00:00:00 !!! 
rabbitmq_erlang-source/signature                                                                               |  819 B  00:00:00     
rabbitmq_erlang-source/signature                                                                               |  951 B  00:00:00 !!! 

Dependencies Resolved

======================================================================================================================================
 Package                Arch                   Version                           Repository                                      Size
======================================================================================================================================
Installing:
 erlang                 x86_64                 22.3.4.12-1.el7                   /erlang-22.3.4.12-1.el7.x86_64                  34 M

Transaction Summary
======================================================================================================================================
Install  1 Package

Total size: 34 M
Installed size: 34 M
Is this ok [y/d/N]: y
Downloading packages:
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
  Installing : erlang-22.3.4.12-1.el7.x86_64                                                                                      1/1 
  Verifying  : erlang-22.3.4.12-1.el7.x86_64                                                                                      1/1 

Installed:
  erlang.x86_64 0:22.3.4.12-1.el7                                                                                                     

Complete!

二 RabbitMQ下载安装
下面依旧通过wget命令完成RabbitMQ的下载。

wget --content-disposition https://packagecloud.io/rabbitmq/rabbitmq-server/packages/el/7/rabbitmq-server-3.8.13-1.el7.noarch.rpm/download.rpm

当你下载完成后，你需要运行下面的命令来将 Key 导入，执行命令：

rpm --import https://www.rabbitmq.com/rabbitmq-release-signing-key.asc

yum安装：

yum localinstall rabbitmq-server-3.8.13-1.el7.noarch.rpm
[root@VM-8-17-centos new]# rpm --import https://www.rabbitmq.com/rabbitmq-release-signing-key.asc
[root@VM-8-17-centos new]# yum localinstall rabbitmq-server-3.8.13-1.el7.noarch.rpm
Loaded plugins: fastestmirror, langpacks
Repository epel is listed more than once in the configuration
Examining rabbitmq-server-3.8.13-1.el7.noarch.rpm: rabbitmq-server-3.8.13-1.el7.noarch
Marking rabbitmq-server-3.8.13-1.el7.noarch.rpm to be installed
Resolving Dependencies
--> Running transaction check
---> Package rabbitmq-server.noarch 0:3.8.13-1.el7 will be installed
--> Processing Dependency: socat for package: rabbitmq-server-3.8.13-1.el7.noarch
Loading mirror speeds from cached hostfile
 * centos-sclo-rh: mirrors.bupt.edu.cn
--> Running transaction check
---> Package socat.x86_64 0:1.7.3.2-2.el7 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

======================================================================================================================================
 Package                      Arch                Version                     Repository                                         Size
======================================================================================================================================
Installing:
 rabbitmq-server              noarch              3.8.13-1.el7                /rabbitmq-server-3.8.13-1.el7.noarch               16 M
Installing for dependencies:
 socat                        x86_64              1.7.3.2-2.el7               os                                                290 k

Transaction Summary
======================================================================================================================================
Install  1 Package (+1 Dependent package)

Total size: 16 M
Total download size: 290 k
Installed size: 17 M
Is this ok [y/d/N]: y
Downloading packages:
socat-1.7.3.2-2.el7.x86_64.rpm                                                                                 | 290 kB  00:00:00     
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
  Installing : socat-1.7.3.2-2.el7.x86_64                                                                                         1/2 
  Installing : rabbitmq-server-3.8.13-1.el7.noarch                                                                                2/2 
  Verifying  : rabbitmq-server-3.8.13-1.el7.noarch                                                                                1/2 
  Verifying  : socat-1.7.3.2-2.el7.x86_64                                                                                         2/2 

Installed:
  rabbitmq-server.noarch 0:3.8.13-1.el7                                                                                               

Dependency Installed:
  socat.x86_64 0:1.7.3.2-2.el7                                                                                                        

Complete!

如此RabbitMQ安装成功就安装成功了，安装完成后，需要启动 rabbitmq 服务器，执行命令：

systemctl start rabbitmq-server

设置开机自动启动，执行命令：

systemctl enable rabbitmq-server

在目录下启动的命令

/sbin/service rabbitmq-server start  #启动

/sbin/service rabbitmq-server status #状态

/sbin/service rabbitmq-server stop #停止

三 RabbitMQ Web界面管理
默认情况下，是没有安装web端的客户端插件，需要安装才可以生效 。执行命令：

[root@VM-8-17-centos new]# rabbitmq-plugins enable rabbitmq_management
Enabling plugins on node rabbit@VM-8-17-centos:
rabbitmq_management
The following plugins have been configured:
  rabbitmq_management
  rabbitmq_management_agent
  rabbitmq_web_dispatch
Applying plugin configuration to rabbit@VM-8-17-centos...
The following plugins have been enabled:
  rabbitmq_management
  rabbitmq_management_agent
  rabbitmq_web_dispatch

set 3 plugins.
Offline change; changes will take effect at broker restart.

安装完毕以后，重启服务即可，执行命令：

[root@VM-8-17-centos new]# systemctl restart rabbitmq-server

注意，请在服务器上开放 15672 端口

firewall-cmd --zone=public --add-port=15672/tcp --permanent

systemctl restart firewalld

新增用户。

[root@VM-8-17-centos new]# rabbitmqctl add_user admin 123456
Adding user "admin" ...
Done. Don't forget to grant the user permissions to some virtual hosts! See 'rabbitmqctl help set_permissions' to learn more.

设置用户分配操作权限。

[root@VM-8-17-centos new]# rabbitmqctl set_user_tags admin administrator
Setting tags for user "admin" to [administrator] ...

设置 vhost的用户权限

[root@VM-8-17-centos new]# rabbitmqctl set_permissions -p / admin ".*" ".*" ".*" 
Setting permissions for user "admin" in vhost "/" ...

最后就可以输入IP:15672登录web界面了

总结使用rpm包安装方式是最快捷的一种方式，不过还有源码安装方式，
但是比如 ：erlang环境
wget http://www.erlang.org/download/otp_src_24.0.tar.gz，下载慢如蜗牛
顺便贴下过程，我这里使用otp_src_21.1.tar.gz演示

（1）安装erlang所需要的依赖
1 运行以下命令，安装erlang所需要的依赖

yum install -y make gcc gcc-c++ m4 openssl openssl-devel ncurses-devel unixODBC unixODBC-devel java java-devel

2 运行以下命令，下载erlang安装包

wget http://erlang.org/download/otp_src_21.1.tar.gz

3 运行以下命令，解压erlang安装包

tar -zxvf otp_src_21.1.tar.gz

4 运行以下命令，进入erlang安装包的解压路径，并为erlang创建一个新的目录

cd otp_src_21.1
mkdir -p /usr/local/erlang

5 依次运行以下命令，编译并安装erlang

./configure --prefix=/usr/local/erlang
make && make install

6 安装完成后，运行以下命令，为erlang配置环境变量

echo 'export PATH=$PATH:/usr/local/erlang/bin' >> /etc/profile

7 运行以下命令，使环境变量立即生效

source /etc/profile

8 运行以下命令，返回系统的/root目录，然后查看erlang版本，确认是否安装成功

cd
erl -version

（2）下载并安装RabbitMQ
RabbitMQ对Erlang的版本具有一定限制，更多信息，请参见RabbitMQ Erlang Version Requirements。本示例使用的Erlang为21.1版本，因此选择下载RabbitMQ 3.7.8版本

1、运行以下命令，下载RabbitMQ安装包

wget https://github.com/rabbitmq/rabbitmq-server/releases/download/v3.7.8/rabbitmq-server-generic-unix-3.7.8.tar.xz

2、运行以下命令，解压RabbitMQ安装包

tar -xvf rabbitmq-server-generic-unix-3.7.8.tar.xz

3、解压完成后，运行以下命令，为RabbitMQ配置环境变量

echo 'export PATH=$PATH:/root/rabbitmq_server-3.7.8/sbin' >> /etc/profile

4、运行以下命令，使环境变量立即生效

source /etc/profile

（3）配置RabbitMQ。
1、运行以下命令，启动RabbitMQ并后台运行

rabbitmq-server -detached

注意 该命令只在当前运行的系统环境下启动RabbitMQ，一旦服务器重启，RabbitMQ服务将不会自动启动。因此，建议您通过阿里云的云助手功能，设置RabbitMQ开机自启动。具体操作，请参见通过云助手设置RabbitMQ开机自启动。

2、运行以下命令，启动RabbitMQ监控插件。

rabbitmq-plugins enable rabbitmq_management

如果您需要关闭RabbitMQ监控插件，可以运行
rabbitmq-plugins disable rabbitmq_management命令。

3、为保证数据安全，建议您运行以下命令，删除默认用户。

RabbitMQ默认的账号用户名和密码都是guest。

rabbitmqctl delete_user guest

4、创建RabbitMQ管理员用户。

a 运行以下命令，创建一个新用户

rabbitmqctl add_user <用户名> <密码>

其中，<用户名>和<密码>为您自定义的信息。

b 运行以下命令，将创建的新用户设置为管理员。

rabbitmqctl set_user_tags <用户名> administrator

c 运行以下命令，赋予新创建的用户所有权限

rabbitmqctl set_permissions -p / <用户名> ".*" ".*" ".*"

（4）配置RabbitMQ的rabbitmq-server文件。

1.1 运行以下命令，编辑rabbitmq-server文件。

vi /root/rabbitmq_server-3.7.8/sbin/rabbitmq-server

1.2 按下shift+:组合键，然后输入set nu查看文件的行号。

1.3 按下shift+:组合键，然后输入189跳转至189行。

1.4 按下i键，进入编辑模式

在189行新增以下内容：

export PATH=$PATH:/usr/local/erlang/bin
export HOME=/root/rabbitmq_server-3.7.8/