最近在弄j-link下载固件老是提示target电压不足。所以在高人指点下就开始升级j-link的固件了。
1.准备一下软件问固件:
Install AT91-ISP v1.13.exe
jlink-v8.bin
2.擦除芯片进入编程模式
1.打开jlink外壳,见到jlink内部点如图如下:
A=RESET B=TST
2.,use the USB to connect the jlink and your PC,to power the jlink.
3.keep duan jie the two hole of A 5 seconed,disconnect the two holes of A. then disconnect the jlink and PC.(take in mind the index)
4.duan jie the two holes of B.
5.use USB to connect the jlink and PC,keep up 10 seconed,then drag out of the USB,stop the supply the power of the jlink(note,in the process,in the B should be in duan jie statement)
6.disconnect the two holes of B.
3.update the faire.
double click the SAM-PROG V.xx icon,which in the desktop. then run the SAM-PROG Vx.x fire write software,fllow below step to setup.
1.connect the USB and PC.in the moment,in the SAM-PROG vX.X software ,the button named with Write Flash will become useable.(note:you should first open the SAM-PROG VX.X,then connected the jlink and PC)
2.click the Write Flash button to fire the gujian,after fired success,the Active Connected item will change to 1.
3. pull out the USB between jlink and PC.
Come to here,the jlink V8 have success updated,in the normal case, when connect the jlink and PC,the LED in the Jlink will blink a while,then keep green.Please prefer to Jlink V8 user guide,use the jlnk V8 to fangzhen.
Finally,after update the gujian,my problem has not be take away.
If anyone else can help me?