UBOOT-1.1.6.错误集合

1.1.6的u-boot老掉牙了，用版本高的编译器编译会出现莫名其妙的问题（实际是我不懂）有的问题现在记录下！

/usr/local/arm/4.4.3/bin/../lib/gcc/arm-none-linux-gnueabi/4.4.3/libgcc.a(_udivsi3.o): In function `__aeabi_uidiv':
/opt/FriendlyARM/mini2440/build-toolschain/working/src/gcc-4.4.3/libgcc/../gcc/config/arm/lib1funcs.asm:824: multiple definition of `__udivsi3'
lib_arm/libarm.a(_udivsi3.o):/home/zl/workpace/2_learn_linux/1_learn/u-boot-1.1.6/lib_arm/_udivsi3.S:17: first defined here
/usr/local/arm/4.4.3/bin/.arm-none-linux-gnueabi-ld: error: Source object /usr/local/arm/4.4.3/bin/../lib/gcc/arm-none-linux-gnueabi/4.4.3/libgcc.a(_udivdi3.o) has EABI version 5, but target u-boot has EABI version 0
/usr/local/arm/4.4.3/bin/.arm-none-linux-gnueabi-ld: failed to merge target specific data of file /usr/local/arm/4.4.3/bin/../lib/gcc/arm-none-linux-gnueabi/4.4.3/libgcc.a(_udivdi3.o)
/usr/local/arm/4.4.3/bin/.arm-none-linux-gnueabi-ld: error: Source object /usr/local/arm/4.4.3/bin/../lib/gcc/arm-none-linux-gnueabi/4.4.3/libgcc.a(_udivsi3.o) has EABI version 5, but target u-boot has EABI version 0
/usr/local/arm/4.4.3/bin/.arm-none-linux-gnueabi-ld: failed to merge target specific data of file /usr/local/arm/4.4.3/bin/../lib/gcc/arm-none-linux-gnueabi/4.4.3/libgcc.a(_udivsi3.o)
/usr/local/arm/4.4.3/bin/.arm-none-linux-gnueabi-ld: error: Source object /usr/local/arm/4.4.3/bin/../lib/gcc/arm-none-linux-gnueabi/4.4.3/libgcc.a(_clzsi2.o) has EABI version 5, but target u-boot has EABI version 0
/usr/local/arm/4.4.3/bin/.arm-none-linux-gnueabi-ld: failed to merge target specific data of file /usr/local/arm/4.4.3/bin/../lib/gcc/arm-none-linux-gnueabi/4.4.3/libgcc.a(_clzsi2.o)
/usr/local/arm/4.4.3/bin/../lib/gcc/arm-none-linux-gnueabi/4.4.3/libgcc.a(_udivdi3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0'
Makefile:263: recipe for target 'u-boot' failed

这个是错误log

什么EABI版本高了，网上查，什么浮点啊，改cpu配置的都不起作用，本来打算换低版本的编译器了，算了，突然看到说加上参数 -nostdlib  

于是用make -nostdlib 编译通过， 

网上查到的 

问题解决：arm-none-linux-gnueabi-gcc加上-nostdlib选项即可

机理
-nostdlib
不连接系统标准启动文件和标准库文件，只把指定的文件传递给连接器。

这个选项常用于编译内核、bootloader等程序，它们不需要启动文件、标准库文件。