1.ARM汇编学习——CPSR寄存器、CPSR_cxsf

最新推荐文章于 2024-04-30 22:17:55 发布
最新推荐文章于 2024-04-30 22:17:55 发布
阅读量1w 收藏 21
点赞数
分类专栏： uboot相关 文章标签： 汇编

1：   ARM每种工作模式除R0~R15共16个寄存器外，还有第17个寄存器CPSR,叫做 当前程序状态寄存器，CPSR中一些位被用于标识各种状态，一些位被用于标识当前出于什么工作模式。


2：这个状态寄存器的32位可以分为四个8位的域,所以，如果CPSR后面加上，c,x,s,f都是容易理解的


其中cpsr_c代表的是cpsr寄存器的低8位，也就是控制位.
有些程序里这样写.
msr cpsr_c, #0xd2       @ 进入中断模式.

3：各个位的详细说明






使用实例：

USR_MODE    EQU     0x10
FIQ_MODE    EQU     0x11
IRQ_MODE    EQU     0x12
SVC_MODE    EQU     0x13
ABT_MODE    EQU     0x17
UDF_MODE    EQU     0x1B
SYS_MODE    EQU     0x1F
I_BIT       EQU     0x80
RAM_Limit       EQU     0x2000000            ; For unexpanded hardware board
UND_Stack       EQU     RAM_Limit
Abort_Stack     EQU     RAM_Limit-256
FIQ_Stack       EQU     RAM_Limit-512       ; followed by IRQ stack
SVC_Stack       EQU     RAM_Limit-1024      ; SVC stack at top of memory
IRQ_Stack       EQU     RAM_Limit-2048      ; followed by IRQ stack
USR_Stack       EQU     RAM_Limit-10240F_BIT       EQU     0x40

;设置对应模式下的堆栈指针，同时禁止中断和快中断
     MSR    CPSR_c, #UDF_MODE :OR: I_BIT :OR: F_BIT
     LDR    SP, =UND_Stack
     MSR    CPSR_c, #ABT_MODE :OR: I_BIT :OR: F_BIT
     LDR    SP, =Abort_Stack
     MSR    CPSR_c, #IRQ_MODE :OR: I_BIT :OR: F_BIT
     LDR    SP, =IRQ_Stack
     MSR    CPSR_c, #FIQ_MODE :OR: I_BIT :OR: F_BIT
     LDR    SP, =FIQ_Stack
     MSR    CPSR_c, #SYS_MODE :OR: I_BIT :OR: F_BIT
     LDR    SP, =USR_Stack
     MSR    CPSR_c, #SVC_MODE :OR: I_BIT :OR: F_BIT
     LDR    SP, =SVC_Stack



zhj失落之地
关注
  • 0
    点赞
  • 踩
  • 21
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
ARM中cpsr学习
08-22
ARM中通过cpsr技术，可以让arm工作在不同的工作状态。
CPSR_cxsf 详解
Linux Openharmony Android Graphics Stack!
12-08 4707
1：   ARM每种工作模式除R0~R15共16个寄存器外，还有第17个寄存器CPSR,叫做 当前程序状态寄存器，CPSR中一些位被用于标识各种状态，一些位被用于标识当前出于什么工作模式。 2：这个状态寄存器的32位可以分为四个
微处理器与嵌入式设备——ARM基础编程实验
qq_45945307的博客
06-23 878
在实验1中，我们探究了ARM的基本工作方式，了解了他们的数据处理指令寻址方式,内存访问指令寻址方式,堆栈指针SP的使用，程序计数器PC的工作方式和子程序的返回和调用，程序状态寄存器PSR的使用和工作模式的切换。在实验2中，我们利用纯汇编的方式完成了累加的操作，掌握了如何控制循环的方式。在实验3中，我们用C调用汇编，要在在C中声明函数原型，并加extern关键字；在汇编中用EXPORT导出函数名，并用该函数名作为汇编代码段的标识。
学习ARM汇编的经典参考资料
03-28
学习ARM汇编指令的经典资料。 对ARM的各种汇编指令进行了深入全面的讲解，并给出了各种示例和详细注解，并且还对一些值得注意的点或是容易犯错误的地方进行了总结。 目录 前言................................................................................................................................................................i 目录................................................................................................................................................................I ARM7TDMI(-S)指令集及汇编....................................................................................................................1 ARM处理器寻址方式..........................................................................................................................2 寄存器寻址....................................................................................................................................2 立即寻址........................................................................................................................................2 寄存器偏移寻址............................................................................................................................2 寄存器间接寻址............................................................................................................................3 基址寻址........................................................................................................................................3 多寄存器寻址................................................................................................................................4 堆栈寻址........................................................................................................................................4 块拷贝寻址....................................................................................................................................5 相对寻址........................................................................................................................................5 指令集介绍............................................................................................................................................7 ARM指令集..................................................................................................................................7 指令格式................................................................................................................................7 第2个操作数................................................................................................................7 ＃immed_8r...........................................................................................................7 Rm..........................................................................................................................8 Rm,shift..................................................................................................................8 条件码............................................................................................................................9 ARM存储器访问指令........................................................................................................11 　 LDR和STR........................................................................................................11 　 LDM和STM.......................................................................................................14 　 SWP.....................................................................................................................17 ARM数据处理指令............................................................................................................19 数据传送指令..............................................................................................................20 　 MOV............................................................................................................20 　 MVN............................................................................................................20 算术逻辑运算指令......................................................................................................20 　 ADD.............................................................................................................20 　 SUB..............................................................................................................21 　 RSB..............................................................................................................21 　 ADC.............................................................................................................21 　 SBC..............................................................................................................21 　 RSC..............................................................................................................22 　 AND.............................................................................................................22 　 ORR..............................................................................................................22 　 EOR..............................................................................................................22 　 BIC...............................................................................................................23 比较指令......................................................................................................................23 　 CMP.............................................................................................................23 　 CMN.............................................................................................................23 　 TST...............................................................................................................24 　 TEQ..............................................................................................................24 乘法指令......................................................................................................................25 　 MUL.............................................................................................................25 　 MLA.............................................................................................................25 　 UMULL........................................................................................................25 　 UMLAL........................................................................................................26 　 SMULL........................................................................................................26 　 SMLAL........................................................................................................26 ARM跳转指令....................................................................................................................27 　 B...........................................................................................................................27 　 BL.........................................................................................................................27 　 BX........................................................................................................................27 ARM协处理器指令............................................................................................................28 　 CDP......................................................................................................................28 　 LDC......................................................................................................................29 　 STC......................................................................................................................29 　 MCR.....................................................................................................................30 　 MRC.....................................................................................................................30 ARM杂项指令....................................................................................................................31 　 SWI......................................................................................................................31 　 MRS.....................................................................................................................32 　 MSR.....................................................................................................................33 ARM伪指令........................................................................................................................34 　 ADR.....................................................................................................................35 　 ADRL...................................................................................................................35 　 LDR......................................................................................................................36 　 NOP......................................................................................................................37 Thumb指令集.............................................................................................................................39 Thumb指令集与ARM指令集的区别..............................................................................39 Thumb存储器访问指令.....................................................................................................40 　 LDR和STR........................................................................................................41 　 PUSH和POP......................................................................................................43 　 LDMIA和STMIA..............................................................................................43 Thumb数据处理指令.........................................................................................................45 数据传送指令..............................................................................................................46 　 MOV............................................................................................................46 　 MVN............................................................................................................46 　 NEG..............................................................................................................47 算术逻辑运算指令......................................................................................................47 　 ADD.............................................................................................................47 　 SUB..............................................................................................................48 　 ADC.............................................................................................................49 　 SBC..............................................................................................................49 　 MUL.............................................................................................................50 　 AND.............................................................................................................50 　 ORR..............................................................................................................50 　 EOR..............................................................................................................51 　 BIC...............................................................................................................51 　 ASR..............................................................................................................51 　 LSL...............................................................................................................52 　 LSR..............................................................................................................52 　 ROR..............................................................................................................53 比较指令......................................................................................................................53 　 CMP.............................................................................................................53 　 CMN.............................................................................................................54 　 TST...............................................................................................................54 Thumb跳转指令.........................................................................................................55 　 B...................................................................................................................55 　 BL.................................................................................................................55 　 BX................................................................................................................55 Thumb杂项指令.........................................................................................................56 　 SWI..............................................................................................................56 Thumb伪指令.............................................................................................................57 　 ADR.............................................................................................................57 　 LDR..............................................................................................................57 　 NOP..............................................................................................................58 伪指令..................................................................................................................................................59 符号定义伪指令..........................................................................................................................59 　 GBLA、GBLL、GBLS..............................................................................................59 　 LCLA、LCLL、LCLS................................................................................................60 　 SETA、SETL、SETS.................................................................................................61 　 RLIST...........................................................................................................................61 　 CN................................................................................................................................62 　 CP.................................................................................................................................62 　 DN、SN.......................................................................................................................62 　 FN.................................................................................................................................63 数据定义伪指令..........................................................................................................................63 　 LTORG.........................................................................................................................64 　 MAP.............................................................................................................................64 　 FIELD..........................................................................................................................65 　 SPACE..........................................................................................................................66 　 DCB.............................................................................................................................66 　 DCD和DCDU............................................................................................................67 　 DCDO..........................................................................................................................67 　 DCFD和DCFDU........................................................................................................68 　 DCFS和DCFSU.........................................................................................................68 　 DCI...............................................................................................................................69 　 DCQ和DCQU............................................................................................................69 　 DCW和DCWU..........................................................................................................70 报告伪指令..................................................................................................................................70 　 ASSERT.......................................................................................................................70 　 INFO............................................................................................................................71 　 OPT..............................................................................................................................71 　 TTL和SUBT..............................................................................................................72 汇编控制伪指令..........................................................................................................................73 　 IF、ELSE和ENDIF...................................................................................................73 　 MACRO和MEND.....................................................................................................74 　 WHIL和WEND.........................................................................................................75 杂项伪指令..................................................................................................................................76 　 ALIGN.........................................................................................................................77 　 AREA...........................................................................................................................78 　 CODE16和CODE32..................................................................................................79 　 END.............................................................................................................................80 　 ENTRY.........................................................................................................................80 　 EQU.............................................................................................................................81 　 EXPORT和GLOBAL................................................................................................81 　 IMPORT和EXTERN.................................................................................................82 　 GET和INCLUDE......................................................................................................83 　 INCBIN........................................................................................................................83 　 KEEP............................................................................................................................83 　 NOFP...........................................................................................................................84 　 REQUIRE....................................................................................................................84 　 PEQUIRE8和PRESERVE8.......................................................................................84 　 RN................................................................................................................................84 　 ROUT...........................................................................................................................85 ARM伪指令................................................................................................................................86 　 ADR.............................................................................................................................86 　 ADRL...........................................................................................................................86 　 LDR..............................................................................................................................86 　 NOP..............................................................................................................................86 　 LDFD...........................................................................................................................86 　 LDFS............................................................................................................................87 Thumb伪指令.............................................................................................................................87 　 ADR.............................................................................................................................87 　 LDR..............................................................................................................................87 　 NOP..............................................................................................................................88 ARM汇编程序设计............................................................................................................................88 文件格式......................................................................................................................................88 ARM汇编的一些规范................................................................................................................88 汇编语句格式......................................................................................................................88 标号......................................................................................................................................89 　 基于PC的标号...................................................................................................89 　 基于寄存器的标号..............................................................................................90 　 绝对地址..............................................................................................................90 局部标号..............................................................................................................................90 符号......................................................................................................................................91 常量......................................................................................................................................91 　 数字常数..............................................................................................................91 　 字符常量..............................................................................................................92 　 布尔常量..............................................................................................................92 段定义..................................................................................................................................92 宏定义及其作用..................................................................................................................93 子程序的调用..............................................................................................................................94 数据比较跳转..............................................................................................................................95 循环..............................................................................................................................................95 数据块复制..................................................................................................................................95 栈操作..........................................................................................................................................96 特殊寄存器定义及应用..............................................................................................................96 散转功能......................................................................................................................................97 查表操作......................................................................................................................................97 长跳转..........................................................................................................................................97 对信号量的支持..........................................................................................................................98 伪指令使用..................................................................................................................................98 一个完整的例子..........................................................................................................................98 外围部件控制..............................................................................................................................99 三级流水线介绍..........................................................................................................................99 C与汇编混合编程............................................................................................................................100 内嵌汇编....................................................................................................................................100 内嵌汇编的指令用法........................................................................................................103 内嵌汇编器与armasm汇编器的差异.............................................................................104 内嵌汇编注意事项............................................................................................................104 访问全局变量............................................................................................................................106 C与汇编相互调用....................................................................................................................107 寄存器的使用规则............................................................................................................108 堆栈使用规则....................................................................................................................108 参数传递规则....................................................................................................................109 C程序调用汇编程序........................................................................................................110 汇编程序调用C程序.......................................................................................................111 ARM指令集列表..............................................................................................................................113 ARM存储器访问指令表列表..................................................................................................113 ARM数据处理指令列表..........................................................................................................114 ARM乘法指令列表..................................................................................................................115 ARM跳转指令列表..................................................................................................................116 ARM协处理器指令列表..........................................................................................................117 ARM杂项指令列表..................................................................................................................118 ARM伪指令列表......................................................................................................................119 Thumb指令集列表...........................................................................................................................120 Thumb存储器访问指令列表...................................................................................................120 Thumb数据处理指令列表.......................................................................................................121 Thumb跳转指令及软中断指令列表.......................................................................................122 Thumb伪指令列表...................................................................................................................123 汇编预定义变量及伪指令................................................................................................................124 预定义的寄存器和协处理器名................................................................................................124 通用寄存器........................................................................................................................124 程序状态寄存器................................................................................................................124 浮点数寄存器....................................................................................................................124 协处理器及协处理器寄存器............................................................................................125 内置变量列表............................................................................................................................125 伪指令列表................................................................................................................................126 指令条件码列表........................................................................................................................128 CPSR和SPSR分配图.............................................................................................................................129
启动代码里cpsr_cxsf的意思
08-30
在启动代码里，我们会看到如 msr cpsr_cxsf,r0这样的代码。 请问CPSR_cxsf是什么意思？ 用MSR指令对PSR进行操作的时候，为了设定操作的范围，避免对某些位的操作而影响其他部分而定义了这几个FLAG。
linux中断内核堆栈与svc,ARM+Linux中断系统详细分析
weixin_36040444的博客
05-01 414
ULK第四章里明确讲到“Linux实现了一种没有优先级的中断模型”，并且“Linux中断和异常都支持嵌套”。这个我不太理解了，这两种说法都与我以前的理解刚好相反，核对了原书，翻译没有错。Linux中断系统到底是否支持优先级，可否嵌套，中断号又是怎么来确定的，中断产生时又是如何一步步执行到中断处理函数的。为了彻底搞懂Linux中断系统，我决定从最原始材料出发，一探究竟。(s3c2440+linux2...
自己学驱动7——uboot代码阅读二(start.S)
laoniu_c的专栏
11-23 1250
#ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START IRQ_STACK_START:     .word    0x0badc0de /* IRQ stack memory (calculated at run-time) */ .globl FIQ
ARM基础：ARM指令之MSR
Android/Linux的专栏
01-22 5427
/****************************************************************************************************************** 原文地址：http://www.cnblogs.com/faraway/archive/2009/03/06/1404449.html 说明：Error  A145
cpsr寄存器
weixin_42097108的博客
06-12 834
设置cpsr寄存器为svc模式（特权模式） CPSR:程序状态寄存器(current program status register) cpsr在用户级编程时用于存储条件码；CPSR包含条件码标志，中断禁止位，当前处理器模式以及其他状态和控制信息。 mrs指令 功能：将状态寄存器的内容传送至通用寄存器。 mrs r0，cpsr； 将cpsr寄存器的内存放在r0寄存器中； bic指令 功能：bit clear位清除指令； 示例：bic R0，R0，#0x1F；//将R0最低5位清零，其余位不变； orr指令
ARM汇编指令以及伪指令
qq_24601427的博客
10-26 6496
文章目录ARM寄存器ARM寻址方式数据处理指令转移指令程序状态寄存器访问指令加载/存储指令异常指令伪指令ARM的存储系统ATPCS介绍异常中断处理ARM链接器 ARM寄存器 R13：栈指针寄存器(SP) R14：连接寄存器(LR) R15：程序计数器(PC) 由于ARM指令是字对齐，PC值的第0位和第1位总为0 ARM寻址方式 数据处理指令 转移指令 程序状态寄存器访问指令 加载/存储指令 异常指令 伪指令 ARM的存储系统 ATPCS介绍 异常中断处理 ARM链接器 ...
ARM_cpsr寄存器
08-23
ARM_cpsr寄存器
ARM中的程序状态寄存器(CPSR).pdf
08-25
ARM中的程序状态寄存器(CPSR).pdf
CPSR_C ,CPSR_cxsf 详解
春风得意，马蹄仍急；少年豪情，一笑难回。
06-15 6420
1：   ARM每种工作模式除R0~R15共16个寄存器外，还有第17个寄存器CPSR,叫做 当前程序状态寄存器，CPSR中一些位被用于标识各种状态，一些位被用于标识当前出于什么工作模式。 2：这个状态寄存器的32位可以分为四个8位的域      所以，如果CPSR后面加上，c,x,s,f都是容易理解的 3：各个位的详细说明
ARM汇编中^、!、cxsf符号和movs等指令使用
yubingjunj的专栏
12-22 2112
ARM汇编中^、!、cxsf符号和movs等指令使用浅析arm汇编中^、!、cxsf符号和movs等指令使用学习-之1文章来源:http://gliethttp.cublog.cn.macro restore_user_regs   ldr r1,[sp, #S_PSR]   ldr lr,[sp, #S_PC]!   @ !用来控制基址变址寻址的最终新地址是否进行
Linux kernel的中断子系统之（六）：ARM中断处理过程
qq_38350702的博客
10-29 730
一、前言 本文主要以ARM体系结构下的中断处理为例，讲述整个中断处理过程中的硬件行为和软件动作。具体整个处理过程分成三个步骤来描述： 1、第二章描述了中断处理的准备过程 2、第三章描述了当发生中的时候，ARM硬件的行为 3、第四章描述了ARM的中断进入过程 4、第五章描述了ARM的中断退出过程 本文涉及的代码来自3.14内核。另外，本文注意描述ARM指令集的内容，有些source code为了简短一些，删除了THUMB相关的代码，除此之外，有些debug相关的内容也会删除。 二、中断处理的准备过程 1、中断
ARM入门笔记（8）
weixin_33725126的博客
03-16 78
第八章 中断控制实验 一．背景 实际上ARM的中断与51单片机的中断类似，都有类似的中断入口地址（ARM称异常向量表）。只不过51给两个相互的中断入口之间留有足够的空间（如外部中断0的中断入口在03H处，而定时器0的中断入口在0BH处），在这段空间中可以放多条指令，这样在编写中断处理程序时非常灵活。ARM总共有7种中断（或异常）类型，它们的入口分别为00H、04H ┄┄ 1C...
ARM 汇编指令 CPS CPSID CPSIE
坚韧与专注
04-16 3945
ARM 汇编 ：CPS CPSID CPSIE的了解
刘帅嵌入式系统-当前程序状态寄存器(cpsr)
shuai532209720的博客
03-01 1601
CPSR的格式如下图。SPSR格式与CPSR格式相同。 1、条件标志位 N(Negative)、Z(Zero)、C(Carry)及V(oVerflow)统称为条件标志位。大部分的ARM指令可以根据CPSR中的这些条件标志位选择性地执行。各条件标志位的具体含义如下。 N：当两个补码表示的有符号整数运算时，N=1表示运算的结果为负数；N=0表示结果为整数或零。 Z：Z=1表示运算...
8086 汇编学习 Part 5
最新发布
AlwaysBeShine的博客
04-30 345
一般情况下指令是顺序地逐条执行的，而在实际中，常需要改变程序的执行流程。
CPSR寄存器是用来干什么的
06-12
CPSR（Current Program Status Register）寄存器是ARM处理器中一个非常重要的寄存器，用于记录当前处理器的状态和控制一些操作。CPSR寄存器的位数为32位，其中包括了程序状态标志位（Program Status Flags）、控制位（Control Bits）和保留位（Reserved Bits）三个部分。 1. 程序状态标志位：CPSR寄存器的程序状态标志位包括了当前处理器的状态信息，如处理器的运行模式（用户模式、系统模式、中断模式等）、条件标志位（Zero、Carry、Negative、Overflow等）和其他标志位等。 2. 控制位：CPSR寄存器的控制位用于控制一些处理器的操作，比如控制处理器是否允许中断、是否开启协处理器等。 3. 保留位：CPSR寄存器的保留位在当前版本的ARM体系结构中未被使用，保留给未来可能的扩展。 总之，CPSR寄存器是ARM处理器中一个非常重要的寄存器，用于记录当前处理器的状态和控制一些操作。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值