(1)dts配置
wireless-wlan {
compatible = "wlan-platdata";
rockchip,grf = <&grf>;
wifi_chip_type = "rtl8723ds";
sdio_vref = <1800>;
WIFI,host_wake_irq = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; /* GPIO0_a3 */
status = "okay";
};
wireless-bluetooth {
compatible = "bluetooth-platdata";
clocks = <&rk808 1>;
clock-names = "ext_clock";
uart_rts_gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "rts_gpio";
pinctrl-0 = <&uart0_rts>, <&bt_reset_gpio>, <&bt_wake_gpio>, <&bt_irq_gpio>;
pinctrl-1 = &l