整个ft5x06_ts.idc文件如下:
touch.deviceType = touchScreen
touch.orientationAware = 1
只定义了type和方向
idc文件在inputreader.cpp文件中被处理
void TouchInputMapper::configureParameters() {
// Use the pointer presentation mode for devices that do not support distinct
// multitouch. The spot-based presentation relies on being able to accurately
// locate two or more fingers on the touch pad.
mParameters.gestureMode = getEventHub()->hasInputProperty(getDeviceId(), INPUT_PROP_SEMI_MT)
? Parameters::GESTURE_MODE_POINTER : Parameters::GESTURE_MODE_SPOTS;
String8 gestureModeString;
if (getDevice()->getConfiguration().tryGetProperty(String8("touch.gestureMode"),
gestureModeString)) {
if (gestureModeString == "pointer") {
mParameters.gestureMode = Parameters::GESTURE_MODE_POINTER;
} else if (gestureModeString == "spots") {
mParameters.gestureMode = Parameters::GESTURE_MODE_SPOTS;
} else if (gestureModeString != "default") {
ALOGW("Invalid value for touch.gestureMode: '%s'", gestureModeString.string());
}
}
if (getEventHub()->hasInputProperty(getDeviceId(), INPUT_PROP_DIRECT)) {
// The device is a touch screen.
mParameters.deviceType = Parameters::DEVICE_TYPE_TOUCH_SCREEN;
} else if (getEventHub()->hasInputProperty(getDeviceId(), INPUT_PROP_POINTER)) {
// The device is a pointing device like a track pad.
mParameters.deviceType = Parameters::DEVICE_TYPE_POINTER;
} else if (getEventHub()->hasRelativeAxis(getDeviceId(), REL_X)
|| getEventHub()->hasRelativeAxis(getDeviceId(), REL_Y)) {
// The device is a cursor device with a touch pad attached.
// By default don't use the touch pad to move the pointer.
mParameters.deviceType = Parameters::DEVICE_TYPE_TOUCH_PAD;
} else {
// The device is a touch pad of unknown purpose.
mParameters.deviceType = Parameters::DEVICE_TYPE_POINTER;
}
mParameters.hasButtonUnderPad=
getEventHub()->hasInputProperty(getDeviceId(), INPUT_PROP_BUTTONPAD);
String8 deviceTypeString;
if (getDevice()->getConfiguration().tryGetProperty(String8("touch.deviceType"), //从idc文件中获取字符串
deviceTypeString)) {
if (deviceTypeString == "touchScreen") { //进行匹配
mParameters.deviceType = Parameters::DEVICE_TYPE_TOUCH_SCREEN;
} else if (deviceTypeString == "touchPad") {
mParameters.deviceType = Parameters::DEVICE_TYPE_TOUCH_PAD;
} else if (deviceTypeString == "touchNavigation") {
mParameters.deviceType = Parameters::DEVICE_TYPE_TOUCH_NAVIGATION;
} else if (deviceTypeString == "pointer") {
mParameters.deviceType = Parameters::DEVICE_TYPE_POINTER;
} else if (deviceTypeString != "default") {
ALOGW("Invalid value for touch.deviceType: '%s'", deviceTypeString.string());
}
}
mParameters.orientationAware = mParameters.deviceType == Parameters::DEVICE_TYPE_TOUCH_SCREEN;
getDevice()->getConfiguration().tryGetProperty(String8("touch.orientationAware"),//对方向解析
mParameters.orientationAware);
mParameters.hasAssociatedDisplay = false;
mParameters.associatedDisplayIsExternal = false;
if (mParameters.orientationAware
|| mParameters.deviceType == Parameters::DEVICE_TYPE_TOUCH_SCREEN
|| mParameters.deviceType == Parameters::DEVICE_TYPE_POINTER) {
mParameters.hasAssociatedDisplay = true;
mParameters.associatedDisplayIsExternal =
mParameters.deviceType == Parameters::DEVICE_TYPE_TOUCH_SCREEN
&& getDevice()->isExternal();
}
// Initial downs on external touch devices should wake the device.
// Normally we don't do this for internal touch screens to prevent them from waking
// up in your pocket but you can enable it using the input device configuration.
mParameters.wake = getDevice()->isExternal();
getDevice()->getConfiguration().tryGetProperty(String8("touch.wake"),
mParameters.wake);
}
上面的函数在configure中被调用
void TouchInputMapper::configure{
if (!changes) { // first time only
// Configure basic parameters.
configureParameters();
}
在void InputDevice::configure(){
for (size_t i = 0; i < numMappers; i++) {
InputMapper* mapper = mMappers[i];
mapper->configure(when, config, changes);
mSources |= mapper->getSources();
}
}也就是在设备初始化的时候
void InputReader::addDeviceLocked(nsecs_t when, int32_t deviceId) {
device->configure(when, &mConfig, 0);
}
touch.deviceType = touchScreen
touch.orientationAware = 1
只定义了type和方向
idc文件在inputreader.cpp文件中被处理
void TouchInputMapper::configureParameters() {
// Use the pointer presentation mode for devices that do not support distinct
// multitouch. The spot-based presentation relies on being able to accurately
// locate two or more fingers on the touch pad.
mParameters.gestureMode = getEventHub()->hasInputProperty(getDeviceId(), INPUT_PROP_SEMI_MT)
? Parameters::GESTURE_MODE_POINTER : Parameters::GESTURE_MODE_SPOTS;
String8 gestureModeString;
if (getDevice()->getConfiguration().tryGetProperty(String8("touch.gestureMode"),
gestureModeString)) {
if (gestureModeString == "pointer") {
mParameters.gestureMode = Parameters::GESTURE_MODE_POINTER;
} else if (gestureModeString == "spots") {
mParameters.gestureMode = Parameters::GESTURE_MODE_SPOTS;
} else if (gestureModeString != "default") {
ALOGW("Invalid value for touch.gestureMode: '%s'", gestureModeString.string());
}
}
if (getEventHub()->hasInputProperty(getDeviceId(), INPUT_PROP_DIRECT)) {
// The device is a touch screen.
mParameters.deviceType = Parameters::DEVICE_TYPE_TOUCH_SCREEN;
} else if (getEventHub()->hasInputProperty(getDeviceId(), INPUT_PROP_POINTER)) {
// The device is a pointing device like a track pad.
mParameters.deviceType = Parameters::DEVICE_TYPE_POINTER;
} else if (getEventHub()->hasRelativeAxis(getDeviceId(), REL_X)
|| getEventHub()->hasRelativeAxis(getDeviceId(), REL_Y)) {
// The device is a cursor device with a touch pad attached.
// By default don't use the touch pad to move the pointer.
mParameters.deviceType = Parameters::DEVICE_TYPE_TOUCH_PAD;
} else {
// The device is a touch pad of unknown purpose.
mParameters.deviceType = Parameters::DEVICE_TYPE_POINTER;
}
mParameters.hasButtonUnderPad=
getEventHub()->hasInputProperty(getDeviceId(), INPUT_PROP_BUTTONPAD);
String8 deviceTypeString;
if (getDevice()->getConfiguration().tryGetProperty(String8("touch.deviceType"), //从idc文件中获取字符串
deviceTypeString)) {
if (deviceTypeString == "touchScreen") { //进行匹配
mParameters.deviceType = Parameters::DEVICE_TYPE_TOUCH_SCREEN;
} else if (deviceTypeString == "touchPad") {
mParameters.deviceType = Parameters::DEVICE_TYPE_TOUCH_PAD;
} else if (deviceTypeString == "touchNavigation") {
mParameters.deviceType = Parameters::DEVICE_TYPE_TOUCH_NAVIGATION;
} else if (deviceTypeString == "pointer") {
mParameters.deviceType = Parameters::DEVICE_TYPE_POINTER;
} else if (deviceTypeString != "default") {
ALOGW("Invalid value for touch.deviceType: '%s'", deviceTypeString.string());
}
}
mParameters.orientationAware = mParameters.deviceType == Parameters::DEVICE_TYPE_TOUCH_SCREEN;
getDevice()->getConfiguration().tryGetProperty(String8("touch.orientationAware"),//对方向解析
mParameters.orientationAware);
mParameters.hasAssociatedDisplay = false;
mParameters.associatedDisplayIsExternal = false;
if (mParameters.orientationAware
|| mParameters.deviceType == Parameters::DEVICE_TYPE_TOUCH_SCREEN
|| mParameters.deviceType == Parameters::DEVICE_TYPE_POINTER) {
mParameters.hasAssociatedDisplay = true;
mParameters.associatedDisplayIsExternal =
mParameters.deviceType == Parameters::DEVICE_TYPE_TOUCH_SCREEN
&& getDevice()->isExternal();
}
// Initial downs on external touch devices should wake the device.
// Normally we don't do this for internal touch screens to prevent them from waking
// up in your pocket but you can enable it using the input device configuration.
mParameters.wake = getDevice()->isExternal();
getDevice()->getConfiguration().tryGetProperty(String8("touch.wake"),
mParameters.wake);
}
上面的函数在configure中被调用
void TouchInputMapper::configure{
if (!changes) { // first time only
// Configure basic parameters.
configureParameters();
}
在void InputDevice::configure(){
for (size_t i = 0; i < numMappers; i++) {
InputMapper* mapper = mMappers[i];
mapper->configure(when, config, changes);
mSources |= mapper->getSources();
}
}也就是在设备初始化的时候
void InputReader::addDeviceLocked(nsecs_t when, int32_t deviceId) {
device->configure(when, &mConfig, 0);
}