Goodix系列------input device的init

在probe函数里会有

static s8 gtp_request_input_dev(struct goodix_ts_data *ts)
{
    s8 ret = -1;
    u8 index = 0;
    ts->input_dev = input_allocate_device();  //先请求分配设备，初始化dev的lock


    ts->input_dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) ;

#if GTP_ICS_SLOT_REPORT
    input_mt_init_slots(ts->input_dev, 16,0);     // 最多上报多少个点
#else
    ts->input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
#endif
    __set_bit(INPUT_PROP_DIRECT, ts->input_dev->propbit);


#if GTP_HAVE_TOUCH_KEY
    for (index = 0; index < GTP_MAX_KEY_NUM; index++)
    {
        input_set_capability(ts->input_dev, EV_KEY, touch_key_array[index]);  //上报key的kernel的定义值
    }
#endif


#if GTP_GESTURE_WAKEUP
    input_set_capability(ts->input_dev, EV_KEY, KEY_POWER);//手势唤醒
#endif 



#if GTP_CHANGE_X2Y
    GTP_SWAP(ts->abs_x_max, ts->abs_y_max);
#endif


    input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0, ts->abs_x_max, 0, 0);
    input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0, ts->abs_y_max, 0, 0);
    input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
    input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
    input_set_abs_params(ts->input_dev, ABS_MT_TRACKING_ID, 0, 255, 0, 0);


    ts->input_dev->name = goodix_ts_name;  //static const char *goodix_ts_name = "goodix-ts";
    ts->input_dev->phys = goodix_input_phys;  //static const char *goodix_input_phys = "input/ts";
    ts->input_dev->id.bustype = BUS_I2C;
    ts->input_dev->id.vendor = 0xDEAD;
    ts->input_dev->id.product = 0xBEEF;
    ts->input_dev->id.version = 10427;
    
    ret = input_register_device(ts->input_dev);  //注册这个device
    if (ret)
    {
        GTP_ERROR("Register %s input device failed", ts->input_dev->name);
        return -ENODEV;
    }


#if GTP_WITH_PEN
    gtp_pen_init(ts);
#endif


    return 0;
}