使用芯片为ZYNQ XC7Z030。使用SDK对外挂的QSPI Flash固化时,报错,无法成功。
Console窗显示为:
WARNING: Could not stop the processor before reset
ERROR(1):
AP transaction timeout: ACK=0x01,expected=0x02)
ERROR(1):
AP transaction error (DP CTRL_STAT=0xf0000021)
ERROR(1):
Could not stop the processor before reset
最后解决办法:
将MIO[5-3]配置成'b000,设置成JTAG boot mode,固化,最后固化成功。再将MIO[5-3]配置成'b100,Quad-SPI 模式后再次烧写,依然成功。