我用VirtualBox最小化安装了一个CentOS,没找到太好的联网方法,发现借助NAT联网是一个很取巧的方法:
很显然,先要将连接方式设置为“网络地址转换(NAT)”:
然后启动CentOS,用ifup通过脚本启动网络接口:
我们man ifup可以看到如下信息:
ifup(8) System Administration tools and Daemons ifup(8)
NAME
ifup - bring a network interface up
ifdown - take a network interface down
SYNOPSIS
ifup CONFIG [boot]
ifdown CONFIG
DESCRIPTION
The ifup and ifdown commands may be used to configure (or, respec- tively, deconfigure) network interfaces based on interface definitions in the files
/etc/sysconfig/network and /etc/sysconfig/network-scripts/ifcfg-<configuration>
These scripts take one argument normally: the name of the configuration (e.g. eth0). They are called with a second argument of "boot" during the boot sequence
so that devices that are not meant to be brought up on boot (ONBOOT=no, see below) can be ignored at that time.
FILES
/etc/sysconfig/network
/etc/sysconfig/network-scripts/ifcfg-<configuration>
The file defining an interface.
SEE ALSO
/usr/share/doc/initscripts-*/sysconfig.txt
当然还可以打开ifcfg-<configuration>文件,将"ONBOOT=no"修改为"ONBOOT=yes",然后"service network restart"。