MT2523 UART 设置奇偶效验

mtk 在这里留了个坑：

A00D000C LCR Line Control Register

SP Stick parity
0: No effect.

1: The parity bit is forced to a defined state, depending on the states of EPS and PEN: If EPS=1 & PEN=1, the even parity bit will be set and checked. If EPS=0 & PEN=1, the odd parity bit will be set and checked.

所以代码应该是如下：

    /* setup parity bit */
    byte &= ~UART_LCR_PARITY_MASK;
    switch (parity) {
        case HAL_UART_PARITY_NONE:
            byte &= ~UART_LCR_PEN_MASK;
            break;
        case HAL_UART_PARITY_ODD:
    byte |= UART_LCR_PEN_MASK;
            byte |= UART_LCR_EPS_ODD;
            break;
        case HAL_UART_PARITY_EVEN:
      byte |= UART_LCR_PEN_MASK;
            byte |= UART_LCR_EPS_EVEN;
            break;
        default:
            break;
    }