- 博客(5)
- 资源 (12)
- 问答 (1)
- 收藏
- 关注
原创 ubuntu 14.04搭建wifi分享热点总结
首先你要下载一个hotspot软件,通过网上制定的地址通常会提示你无法找到该地址,现在我说一下我再搭建改环境的时候的解决方法以及如何搭建成功; ubuntu14.04安装配置无线ap1、添加含有ap-hotspot的资源whw@Y485:sudo add-apt-repository ppa:nilarimogard/webupd82、更新资源whw@Y485:sudo apt-get up
2015-11-30 22:35:56 1611
原创 网络设备将网口切换到业务板以后为什么会报各种不正确的信息?
网络设备将网口切换到业务板以后为什么会报各种不正确的信息? 我们在工作中,很多时候都需要在主控和业务板之间切换网口, 这样做是为了我们通过网口下载业务版特定的版本,来验证或让设备运行在某种状态, 但是有的时候,我们可能会在把网口由主控切到业务板之后忘记将之切换回主控, 我们此时会看到系统会上报很多莫名其妙的错误,但是这种错误在我们检查之后可以 很明确的确认不存在,所以很困惑,到底这些错误信
2015-11-14 18:03:24 609
原创 extern的使用和危害
extern 的用途: extern 在很多时候被我们大量的使用,一般用于引用不在本文件定义或声明的函数还有变量。 对于变量往往更多的是全局变量。 比如在我们在a.c文件定义了一个函数原型,并实现了其功能。当我们再次要使用一个相似功能的函数接口 的时候,我们没必要自己再去实现一遍这样的函数,这样既浪费我们现在宝贵的时间,而且也没有充分利用 我们或者其他人之前所做的努力。如下所示:a1.c
2015-11-14 17:49:05 3752 6
原创 Tcl编写循环执行某个任务的脚本
现在要执行设备执行20次某个人物,然后让设备强制重启,等待20分钟让设备重启完全启动,一直循环10000次, 查看任务在执行的时候会不会出现自己预期的现象:for {set i 1} {$i < 10000} {incr i} { tsend "\n" for {set i 1} {$i < 20} {incr i} { tsend "执行任务1"
2015-11-08 20:52:19 4952
原创 条件限制性进入某个程序流程的限制算法
如果你想在满足某种条件的时候记录某个事件,但是同样的事件 仅仅记录一次,当其状态改变的时候才能再次记录其状态; 如果你想表达该种方式的时候其程序设计算法如下:uint g_uiRecordFlag = 1;void Func() { … if((1 == g_uiRecordFlag) && (条件满足)) { (VOID)RecordFunc(
2015-11-04 23:38:17 517
CoAP_rfc7252.pdf
2020-12-04
openocd-2020-12-23.pdf
2020-11-24
_install.tar.gz
2020-07-08
busybox-1.31.0.tar.bz2
2020-07-08
Real-Time Embedded Multithreading--Using ThreadX.7z
2019-08-20
简明 Python 教程_cn_en
2018-09-04
Inside the C++ Object Model_english&chinese;
2018-07-27
See mips run
2018-03-17
nand操作时page_size = 2048;
2014-11-25
TA创建的收藏夹 TA关注的收藏夹
TA关注的人