抓log的各种方法和命令

#单个c文件产生的log
##test1

adb root
adb shell "echo -n 'file mdss_dsi_panel.c +p' > /sys/kernel/debug/dynamic_debug/control"  
cat /proc/kmsg
cat /dev/kmsg |grep mdss_dsi_panel_bklt_dcs 

##test2

adb wait-for-devices root && adb wait-for-devices remount 
adb shell 
echo -n 'file mdss_fb.c +p' > d/dynamic_debug/control 
cat /proc/kmsg
cat /dev/kmsg |grep mdss_fb_scale_bl

#常用脚本

adb wait-for-device & adb shell dmesg  > dmesg.txt
adb wait-for-device & adb shell logcat > logcat.txt
adb wait-for-device & adb shell "logcat -b kernel" >kernel.txt
adb shell logcat -v time > d:/logcat.txt
pause

###实时不断log

cat /dev/kmsg |grep wuchengbing

##实时会断log

adb shell cat proc/kmsg

##上层 logcat
adb shell logcat *:E -v time > d:/logcat.txt
pause

ALOGI(...)
ALOGD(...)
ALOGE(...)

底层 dmesg

adb shell dmesg | grep clk

##导出qsee.log.bat
adb shell cat /sys/kernel/debug/tzdbg/qsee_log > qsee.log
pause

QXDM

DUMP

DUMP抓取注意事项

抓dump要提供详细的版本号包含日期时间或者提供对应版本的vmlinux文件

#T卡LOG
*#87# -> 手动测试 -> T卡LOG。
方法1。本次开启log，重启后不开启
方法2：一直开启LOG，重启也会开启
方法3：关闭，下次重启不开启。

放到外置T卡，拷贝出来。
adb pull /sdcard/log/ d:\log\

用批处理bat获取log

adb devices
@echo "logs"
adb pull /mnt/sdcard/logs logs
adb pull /mnt/sdcard/log logs
adb pull /data/anr logs/anr
adb pull /data/aee_exp logs/data_aee_exp
adb pull /data/core logs/data_core
adb pull /data/tombstones logs/tombstones
adb shell ps > logs/ps.txt
adb shell dumpstate > logs/dumpstate.txt
adb shell dumpsys > logs/dumpsys.txt
adb shell top -t -d 2 -n 5 > logs/top.txt
adb shell service list > logs/serviceList.txt
adb bugreport > logs/bugreport.txt
adb pull sdcard/log  d:\log
@echo "done"
pause

#音频抓Log方法
请将Daig.cfg文件push到system/etc下面，*20121220# ，选择Kernel，logcat 和QXDM log，log级别如下图所示，抓取离线日志，寄存器信息需要实时dump.

每次测试完如果问题不出现，请清理这次log，复现一次问题提取一次。

Wu_Being博客声明：本人博客欢迎转载，请标明博客原文和原链接！谢谢！
《抓log的各种方法和命令》： http://blog.csdn.net/u014134180/article/details/78120331