最近项目有需求,所以记录一下这些方法
java 合并多个byte[]为一个byte数组
private static byte[] byteMergerAll(byte[]... values) {
int length_byte = 0;
for (int i = 0; i < values.length; i++) {
length_byte += values[i].length;
}
byte[] all_byte = new byte[length_byte];
int countLength = 0;
for (int i = 0; i < values.length; i++) {
byte[] b = values[i];
System.arraycopy(b, 0, all_byte, countLength, b.length);
countLength += b.length;
}
return all_byte;
}
byte[]和int互相转换
Java这个UInt8真的是大坑,竟然把0x8f以上的数据识别为int 详细可以看这里http://www.jianshu.com/p/f66cbeae4d3d
记一下这些方法
/**
* 将int数值转换为占四个字节的byte数组,本方法适用于(低位在前,高位在后)的顺序。 和bytesToInt()配套使用
* @param value
* 要转换的int值
* @return byte数组
*/
public static byte[] intToBytes( int value )
{
byte[] src = new byte[4];
src[3] = (byte) ((value>>24) & 0xFF);
src[2] = (byte) ((value>>16) & 0xFF);
src[1] = (byte) ((value>>8) & 0xFF);
src[0] = (byte) (value & 0xFF);
return src;
}
/**
* 将int数值转换为占四个字节的byte数组,本方法适用于(高位在前,低位在后)的顺序。 和bytesToInt2()配套使用
*/
public static byte[] intToBytes2(int value)
{
byte[] src = new byte[4];
src[0] = (byte) ((value>>24) & 0xFF);
src[1] = (byte) ((value>>16)& 0xFF);
src[2] = (byte) ((value>>8)&0xFF);
src[3] = (byte) (value & 0xFF);
return src;
}
/**
* byte数组中取int数值,本方法适用于(低位在前,高位在后)的顺序,和和intToBytes()配套使用
*
* @param src
* byte数组
* @param offset
* 从数组的第offset位开始
* @return int数值
*/
public static int bytesToInt(byte[] src, int offset) {
int value;
value = (int) ((src[offset] & 0xFF)
| ((src[offset+1] & 0xFF)<<8)
| ((src[offset+2] & 0xFF)<<16)
| ((src[offset+3] & 0xFF)<<24));
return value;
}
/**
* byte数组中取int数值,本方法适用于(低位在后,高位在前)的顺序。和intToBytes2()配套使用
*/
public static int bytesToInt2(byte[] src, int offset) {
int value;
value = (int) ( ((src[offset] & 0xFF)<<24)
|((src[offset+1] & 0xFF)<<16)
|((src[offset+2] & 0xFF)<<8)
|(src[offset+3] & 0xFF));
return value;
}