上次介绍了Spring Boot中Mybatis的简单整合,本篇深入来结合通用Mapper、Mybatis Geneator以及分页PageHelper来打造适合企业开发的模板框架。
抱歉,我被吓到了,明天再来吧,再见…??
于2018-10-30-18:33
1、什么是Spring Boot的ace后端模板?
1、配置数据源
博主还是用的$BABA的druid数据库连接池,maven依赖我是懂的,application.properties配置文件对mySQL数据库和druid数据库连接池的配置我也是懂的,然后在config包中,创建duird的配置类Bean,什么这个那个的filter我就不懂了,还有好多参数,来,欣赏下代码:
@Primary 注解,表示同一个接口被多个类实现时,优先被注入的实现类;
此外,还可以使用@Autowire或者@Resource注解方式进行装配,这两个注解的区别是: @Autowire 默认按照类型装配,默认情况下它要求依赖对象必须存在如果允许为null,可以设置它required属性为false,如果我们想使用按照名称装配,可以结合@Qualifier注解一起使用; @Resource默认按照名称装配,当找不到与名称匹配的bean才会按照类型装配,可以通过name属性指定,如果没有指定name属性,当注解标注在字段上,即默认取字段的名称作为bean名称寻找依赖对象,当注解标注在属性的setter方法上,即默认取属性名作为bean名称寻找依赖对象。
@Configuration
public class DruidConfig {
private Logger logger = LoggerFactory.getLogger(DruidConfig.class);
@Value("${spring.datasource.url:#{null}}")
private String dbUrl;
@Value("${spring.datasource.username: #{null}}")
private String username;
@Value("${spring.datasource.password:#{null}}")
private String password;
@Value("${spring.datasource.driverClassName:#{null}}")
private String driverClassName;
@Value("${spring.datasource.initialSize:#{null}}")
private Integer initialSize;
@Value("${spring.datasource.minIdle:#{null}}")
private Integer minIdle;
@Value("${spring.datasource.maxActive:#{null}}")
private Integer maxActive;
@Value("${spring.datasource.maxWait:#{null}}")
private Integer maxWait;
@Value("${spring.datasource.timeBetweenEvictionRunsMillis:#{null}}")
private Integer timeBetweenEvictionRunsMillis;
@Value("${spring.datasource.minEvictableIdleTimeMillis:#{null}}")
private Integer minEvictableIdleTimeMillis;
@Value("${spring.datasource.validationQuery:#{null}}")
private String validationQuery;
@Value("${spring.datasource.testWhileIdle:#{null}}")
private Boolean testWhileIdle;
@Value("${spring.datasource.testOnBorrow:#{null}}")
private Boolean testOnBorrow;
@Value("${spring.datasource.testOnReturn:#{null}}")
private Boolean testOnReturn;
@Value("${spring.datasource.poolPreparedStatements:#{null}}")
private Boolean poolPreparedStatements;
@Value("${spring.datasource.maxPoolPreparedStatementPerConnectionSize:#{null}}")
private Integer maxPoolPreparedStatementPerConnectionSize;
@Value("${spring.datasource.filters:#{null}}")
private String filters;
@Value("{spring.datasource.connectionProperties:#{null}}")
private String connectionProperties;
@Bean
@Primary
public DataSource dataSource(){
DruidDataSource datasource = new DruidDataSource();
datasource.setUrl(this.dbUrl);
datasource.setUsername(username);
datasource.setPassword(password);
datasource.setDriverClassName(driverClassName);
//configuration
if(initialSize != null) {
datasource.setInitialSize(initialSize);
}
if(minIdle != null) {
datasource.setMinIdle(minIdle);
}
if(maxActive != null) {
datasource.setMaxActive(maxActive);
}
if(maxWait != null) {
datasource.setMaxWait(maxWait);
}
if(timeBetweenEvictionRunsMillis != null) {
datasource.setTimeBetweenEvictionRunsMillis(timeBetweenEvictionRunsMillis);
}
if(minEvictableIdleTimeMillis != null) {
datasource.setMinEvictableIdleTimeMillis(minEvictableIdleTimeMillis);
}
if(validationQuery!=null) {
datasource.setValidationQuery(validationQuery);
}
if(testWhileIdle != null) {
datasource.setTestWhileIdle(testWhileIdle);
}
if(testOnBorrow != null) {
datasource.setTestOnBorrow(testOnBorrow);
}
if(testOnReturn != null) {
datasource.setTestOnReturn(testOnReturn);
}
if(poolPreparedStatements != null) {
datasource.setPoolPreparedStatements(poolPreparedStatements);
}
if(maxPoolPreparedStatementPerConnectionSize != null) {
datasource.setMaxPoolPreparedStatementPerConnectionSize(maxPoolPreparedStatementPerConnectionSize);
}
if(connectionProperties != null) {
datasource.setConnectionProperties(connectionProperties);
}
List<Filter> filters = new ArrayList<>();
filters.add(statFilter());
filters.add(wallFilter());
datasource.setProxyFilters(filters);
return datasource;
}
@Bean
public ServletRegistrationBean druidServlet() {
ServletRegistrationBean servletRegistrationBean = new ServletRegistrationBean(new StatViewServlet(), "/druid/*");
//控制台管理用户,加入下面2行 进入druid后台就需要登录
servletRegistrationBean.addInitParameter("loginUsername", "admin");
servletRegistrationBean.addInitParameter("loginPassword", "admin");
return servletRegistrationBean;
}
@Bean
public FilterRegistrationBean filterRegistrationBean() {
FilterRegistrationBean filterRegistrationBean = new FilterRegistrationBean();
filterRegistrationBean.setFilter(new WebStatFilter());
filterRegistrationBean.addUrlPatterns("/*");
filterRegistrationBean.addInitParameter("exclusions", "*.js,*.gif,*.jpg,*.png,*.css,*.ico,/druid/*");
filterRegistrationBean.addInitParameter("profileEnable", "true");
return filterRegistrationBean;
}
@Bean
public StatFilter statFilter(){
StatFilter statFilter = new StatFilter();
statFilter.setLogSlowSql(true); //slowSqlMillis用来配置SQL慢的标准,执行时间超过slowSqlMillis的就是慢。
statFilter.setMergeSql(true); //SQL合并配置
statFilter.setSlowSqlMillis(1000);//slowSqlMillis的缺省值为3000,也就是3秒。
return statFilter;
}
@Bean
public WallFilter wallFilter(){
WallFilter wallFilter = new WallFilter();
//允许执行多条SQL
WallConfig config = new WallConfig();
config.setMultiStatementAllow(true);
wallFilter.setConfig(config);
return wallFilter;
}
}
2、配置MyBatis,还有MyBatis Generator…
generator的配置文件:src/main/resources/mybatis-generator.xml
对应的application.properties配置:
#指定bean所在包
mybatis.type-aliases-package=com.dudu.domain
#指定映射文件
mybatis.mapperLocations=classpath:mapper/*.xml
#mapper
#mappers 多个接口时逗号隔开
mapper.mappers=com.dudu.util.MyMapper
mapper.not-empty=false
mapper.identity=MYSQL
#pagehelper
pagehelper.helperDialect=mysql
pagehelper.reasonable=true
pagehelper.supportMethodsArguments=true
3、通用Mapper的配置
首先,maven依赖:
<!--通用mapper-->
<dependency>
<groupId>tk.mybatis</groupId>
<artifactId>mapper-spring-boot-starter</artifactId>
<version>1.1.5</version>
</dependency>
然后,实现一个自己的接口,继承通用的mapper。
import tk.mybatis.mapper.common.Mapper;
import tk.mybatis.mapper.common.MySqlMapper;
/**
* 继承自己的MyMapper
*
* @author
* @since 2017-06-26 21:53
*/
public interface MyMapper<T> extends Mapper<T>, MySqlMapper<T> {
//FIXME 特别注意,该接口不能被扫描到,否则会出错
}
关键点就是这个接口不能被扫描到,不能跟存放mapper文件的dao包放在一起,一般新起一个util包。
所以最后需要在启动类中 通过@MapperScan注解指定扫描路径到dao包,否则会扫描到util包,代码如下:
这样就不用自己写常规的增删改查了。
@SpringBootApplication
//启注解事务管理
@EnableTransactionManagement // 注解启动事务管理,等同于xml配置方式的 <tx:annotation-driven />
@MapperScan(basePackages = "com.dudu.dao", markerInterface = MyMapper.class)
public class Application {
public static void main(String[] args) {
SpringApplication.run(Application.class, args);
}
}
启动类里也是疑团重重:
1、markerInterface是啥?
2、为啥要继承SpringBootServletInitializer?然后重写configure方法,感觉错过了很基础的方法…
4、终于到MyBatis Generator配置的重头戏:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE generatorConfiguration
PUBLIC "-//mybatis.org//DTD MyBatis Generator Configuration 1.0//EN"
"http://mybatis.org/dtd/mybatis-generator-config_1_0.dtd">
<generatorConfiguration>
<!--加载配置文件,为下面读取数据库信息准备-->
<properties resource="application.properties"/>
<context id="Mysql" targetRuntime="MyBatis3Simple" defaultModelType="flat">
<plugin type="tk.mybatis.mapper.generator.MapperPlugin">
<property name="mappers" value="com.dudu.util.MyMapper" />
<!--caseSensitive默认false,当数据库表名区分大小写时,可以将该属性设置为true-->
<property name="caseSensitive" value="true"/>
</plugin>
<!-- 阻止生成自动注释 -->
<commentGenerator>
<property name="javaFileEncoding" value="UTF-8"/>
<property name="suppressDate" value="true"/>
<property name="suppressAllComments" value="true"/>
</commentGenerator>
<!--数据库链接地址账号密码-->
<jdbcConnection driverClass="${spring.datasource.driver-class-name}"
connectionURL="${spring.datasource.url}"
userId="${spring.datasource.username}"
password="${spring.datasource.password}">
</jdbcConnection>
<javaTypeResolver>
<property name="forceBigDecimals" value="false"/>
</javaTypeResolver>
<!--生成Model类存放位置-->
<javaModelGenerator targetPackage="com.dudu.domain" targetProject="src/main/java">
<property name="enableSubPackages" value="true"/>
<property name="trimStrings" value="true"/>
</javaModelGenerator>
<!--生成映射文件存放位置-->
<sqlMapGenerator targetPackage="mapper" targetProject="src/main/resources">
<property name="enableSubPackages" value="true"/>
</sqlMapGenerator>
<!--生成Dao类存放位置-->
<!-- 客户端代码,生成易于使用的针对Model对象和XML配置文件 的代码
type="ANNOTATEDMAPPER",生成Java Model 和基于注解的Mapper对象
type="XMLMAPPER",生成SQLMap XML文件和独立的Mapper接口
-->
<javaClientGenerator type="XMLMAPPER" targetPackage="com.dudu.dao" targetProject="src/main/java">
<property name="enableSubPackages" value="true"/>
</javaClientGenerator>
<!--生成对应表及类名
去掉Mybatis Generator生成的一堆 example
-->
<table tableName="LEARN_RESOURCE" domainObjectName="LearnResource" enableCountByExample="false" enableUpdateByExample="false" enableDeleteByExample="false" enableSelectByExample="false" selectByExampleQueryId="false">
<generatedKey column="id" sqlStatement="Mysql" identity="true"/>
</table>
</context>
</generatorConfiguration>
Generator是作为一个maven插件存在于项目中的。所以运行时靠maven命令,或者IDEA的maven管理器。
然后就能自动生成domain包,dao包,相应的mapper.xml映射文件,后者会生成到src/main/resources/mapper路径下。
generator.xml文件太深奥了…
domain类的属性是哪里获取的???
5、通用Service
实现步骤:
1、定义通用service接口:
/**
* 通用接口
*/
@Service
public interface IService<T> {
T selectByKey(Object key);
int save(T entity);
int delete(Object key);
int updateAll(T entity);
int updateNotNull(T entity);
List<T> selectByExample(Object example);
//TODO 其他...
}
2、实现通用接口类:
/**
* 通用Service
* @param <T>
*/
public abstract class BaseService<T> implements IService<T> {
@Autowired
protected Mapper<T> mapper;
public Mapper<T> getMapper() {
return mapper;
}
@Override
public T selectByKey(Object key) {
//说明:根据主键字段进行查询,方法参数必须包含完整的主键属性,查询条件使用等号
return mapper.selectByPrimaryKey(key);
}
@Override
public int save(T entity) {
//说明:保存一个实体,null的属性也会保存,不会使用数据库默认值
return mapper.insert(entity);
}
@Override
public int delete(Object key) {
//说明:根据主键字段进行删除,方法参数必须包含完整的主键属性
return mapper.deleteByPrimaryKey(key);
}
@Override
public int updateAll(T entity) {
//说明:根据主键更新实体全部字段,null值会被更新
return mapper.updateByPrimaryKey(entity);
}
@Override
public int updateNotNull(T entity) {
//根据主键更新属性不为null的值
return mapper.updateByPrimaryKeySelective(entity);
}
@Override
public List<T> selectByExample(Object example) {
//说明:根据Example条件进行查询
//重点:这个查询支持通过Example类指定查询列,通过selectProperties方法指定查询列
return mapper.selectByExample(example);
}
}
其实跟一般的service是一样的,只是把通用的常用的业务抽象了一下。
然后再根据特殊功能扩展就行了。
首先新建一个特殊接口继承通用接口,对于实现类:
继承通用实现类,并实现特殊接口,这样就实现了serviceImpl.java。
然后对于自定义的特殊方法,由于MyBatis generator是根据通用mapper——tk.mapper生成的,所以还要在生成的mapper.java 和mapper.xml中分别实现这些特殊方法,告诉MyBatis和MySQL该怎么做。
总的来说,利用通用Mapper和MyBatis Generator自动生成domain、dao、mapper.xml,将非常方便!
Reference:
[1]: http://tengj.top/2017/12/20/springboot11/