poj 1861 Network

                                                                                                                        

                                                                                                                         Network

 

Description

Andrew is working as system administrator and is planning to establish a new network in his company. There will be N hubs in the company, they can be connected to each other using cables. Since each worker of the company must have access to the whole network, each hub must be accessible by cables from any other hub (with possibly some intermediate hubs).
Since cables of different types are available and shorter ones are cheaper, it is necessary to make such a plan of hub connection, that the maximum length of a single cable is minimal. There is another problem — not each hub can be connected to any other one because of compatibility problems and building geometry limitations. Of course, Andrew will provide you all necessary information about possible hub connections.
You are to help Andrew to find the way to connect hubs so that all above conditions are satisfied.

Input

The first line of the input contains two integer numbers: N - the number of hubs in the network (2 <= N <= 1000) and M - the number of possible hub connections (1 <= M <= 15000). All hubs are numbered from 1 to N. The following M lines contain information about possible connections - the numbers of two hubs, which can be connected and the cable length required to connect them. Length is a positive integer number that does not exceed 10 ⁶. There will be no more than one way to connect two hubs. A hub cannot be connected to itself. There will always be at least one way to connect all hubs.

Output

Output first the maximum length of a single cable in your hub connection plan (the value you should minimize). Then output your plan: first output P - the number of cables used, then output P pairs of integer numbers - numbers of hubs connected by the corresponding cable. Separate numbers by spaces and/or line breaks.

Sample Input

4 6
1 2 1
1 3 1
1 4 2
2 3 1
3 4 1
2 4 1

Sample Output

1
4
1 2
1 3
2 3
3 4

这题就克鲁斯卡尔问题，结果wa了N次，原因在于标记数组标记时，标记数组存成0和1来判断是否标记过，数组大小只有1000，大于1000的数肯定不对。。

#include<cstdio>
#include<cstring>
#include<iostream>
#include<algorithm>
using namespace std;
int f[1010],g[1010];
struct node
{
    int x,y,z;
}a[20100];
int max(int a,int b)
{
    return a>b?a:b;
}
int find(int x)
{
    return f[x]==x?x:f[x]=find(f[x]);
}
bool cmp(node a ,node b)
{
    return a.z < b.z;
}
int main()
{
    int n,m;
    while(scanf("%d%d",&n,&m)!=EOF)
    {
        memset(g,0,sizeof(g));
        for(int i = 1; i <= n ;i++)
        {
            f[i]=i;
        }
        for(int i = 1 ; i <= m ; i++)
            scanf("%d%d%d",&a[i].x,&a[i].y,&a[i].z);
        sort(a+1,a+1+m,cmp);
        int k = 0 ,sum = -1;
        for(int i = 1 ; i <= m ; i++)
        {
            int x = find(a[i].x);
            int y = find(a[i].y);
            if(x==y) 
                continue;
            else{
                f[x]=y;
                sum=max(sum,a[i].z);
                g[k++]=i;
            }
        }
        printf("%d\n%d\n",sum,k);
        for(int i = 0 ; i < k ; i++)
        printf("%d %d\n",a[g[i]].x,a[g[i]].y);
    }
    return 0;
}