Cad二次开发错误消息

• case Acad::eOutOfMemory: lstrcpy(Glb_AcadErrorInfo, _T(“内存不足”)); break;

• case Acad::eInvalidInput: lstrcpy(Glb_AcadErrorInfo, _T(“无效的参数”)); break;

• case Acad::eInvalidInput: lstrcpy(Glb_AcadErrorInfo, _T(“无效的参数”)); break;

• case Acad::eInvalidInput: lstrcpy(Glb_AcadErrorInfo, _T(“无效的参数”)); break;

• case Acad::eInvalidInput: lstrcpy(Glb_AcadErrorInfo, _T(“无效的参数”)); break;

• case Acad::eUserBreak: lstrcpy(Glb_AcadErrorInfo, _T(“操作被取消”)); break;

• case Acad::eCommandNotFound: lstrcpy(Glb_AcadErrorInfo, _T(“无法解析命令”)); break;

• case Acad::eObjectLocked: lstrcpy(Glb_AcadErrorInfo, _T(“对象被锁定”)); break;

• case Acad::eObjectLocked: lstrcpy(Glb_AcadErrorInfo, _T(“对象被锁定”)); break;

• case Acad::eInvalidDwgVersion: lstrcpy(Glb_AcadErrorInfo, _T(“无效的操作”)); break;

• Acad::eInvalidInput: lstrcpy(Glb_AcadErrorInfo, _T(“无效输入”)); break;

• Acad::eAmbiguousInput: lstrcpy(Glb_AcadErrorInfo, _T(“输入模糊”)); break;

• Acad::eNullObjectId: lstrcpy(Glb_AcadErrorInfo, _T(“空对象 ID”)); break;-

• Acad::eBrokenObject: lstrcpy(Glb_AcadErrorInfo, _T(“破损的对象”)); break;

• Acad::eNullPointer: lstrcpy(Glb_AcadErrorInfo, _T(“空指针”)); break;

• Acad::eUndefinedView: lstrcpy(Glb_AcadErrorInfo, _T(“未定义的视图”)); break;

• Acad::eNoActiveTransactions: lstrcpy(Glb_AcadErrorInfo, _T(“没有活动事务”)); break;

• Acad::eNoDatabase: lstrcpy(Glb_AcadErrorInfo, _T(“没有数据库”)); break;

• Acad::eDatabaseNotInitialized: lstrcpy(Glb_AcadErrorInfo, _T(“数据库未初始化”)); break;

• Acad::eInvalidDWGVersion: lstrcpy(Glb_AcadErrorInfo, _T(“无效的 DWG 版本”)); break;

• Acad::eOpenWhileCommandActive: lstrcpy(Glb_AcadErrorInfo, _T(“在命令活动时打开”)); break;

• Acad::eCloseWhileCommandActive: lstrcpy(Glb_AcadErrorInfo, _T(“在命令活动时关闭”)); break;

• Acad::eMustOpenDrawing: lstrcpy(Glb_AcadErrorInfo, _T(“必须打开绘图”)); break;

• Acad::eMustOpenTemplate: lstrcpy(Glb_AcadErrorInfo, _T(“必须打开模板”)); break;

• Acad::eMustOpenSheetSet: lstrcpy(Glb_AcadErrorInfo, _T(“必须打开工作表集”)); break;

• Acad::eMustOpenDrawingOrTemplate: lstrcpy(Glb_AcadErrorInfo, _T(“必须打开绘图或模板”)); break;

• Acad::eInvalidDxfId: lstrcpy(Glb_AcadErrorInfo, _T(“无效的 DXF ID”)); break;

• Acad::eNotHandledYet: lstrcpy(Glb_AcadErrorInfo, _T(“尚未处理”)); break;

• Acad::eNotApplicable: lstrcpy(Glb_AcadErrorInfo, _T(“不适用”)); break;

• Acad::eInvalidViewportObjectId: lstrcpy(Glb_AcadErrorInfo, _T(“无效的视口对象 ID”)); break;

• Acad::eNotInPaperspace: lstrcpy(Glb_AcadErrorInfo, _T(“不在图纸空间”)); break;

• Acad::eInvalidPlotArea: lstrcpy(Glb_AcadErrorInfo, _T(“无效的绘图区域”)); break;

• Acad::ePaperSpaceViewportExists: lstrcpy(Glb_AcadErrorInfo, _T(“图纸空间视口已存在”)); break;

• Acad::eLayoutNameExists: lstrcpy(Glb_AcadErrorInfo, _T(“布局名称已存在”)); break;

• Acad::eNoLayout: lstrcpy(Glb_AcadErrorInfo, _T(“没有布局”)); break;

• case Acad::eObjectToBeDeleted: lstrcpy(Glb_AcadErrorInfo, _T(“对象将被删除”)); break;

• case Acad::eNullObjectId: lstrcpy(Glb_AcadErrorInfo, _T(“空的对象 ID”)); break;

• case Acad::eInvalidDwgVersion: lstrcpy(Glb_AcadErrorInfo, _T(“无效的 DWG 版本”)); break;

• case Acad::eDuplicateRecordName: lstrcpy(Glb_AcadErrorInfo, _T(“记录名称重复”)); break;

• case Acad::eInvalidOwnerObject: lstrcpy(Glb_AcadErrorInfo, _T(“无效的所有者对象”)); break;

• case Acad::eInvalidResBuf: lstrcpy(Glb_AcadErrorInfo, _T(“无效的 ResBuf”)); break;

• case Acad::eDuplicateKey: lstrcpy(Glb_AcadErrorInfo, _T(“键重复”)); break;

• case Acad::eBufferTooSmall: lstrcpy(Glb_AcadErrorInfo, _T(“缓冲区太小”)); break;

• case Acad::eInvalidKey: lstrcpy(Glb_AcadErrorInfo, _T(“无效的键”)); break;

• case Acad::eNoActiveTransactions: lstrcpy(Glb_AcadErrorInfo, _T(“没有活动的事务”)); break;

• case Acad::eDocumentSwitchDisabled: lstrcpy(Glb_AcadErrorInfo, _T(“文档切换已禁用”)); break;

• case Acad::eEndOfObject: lstrcpy(Glb_AcadErrorInfo, _T(“对象结束”)); break;

• case Acad::eEndOfFile: lstrcpy(Glb_AcadErrorInfo, _T(“文件结束”)); break;

• case Acad::eNotImplementedYet: lstrcpy(Glb_AcadErrorInfo, _T(“尚未实现”)); break;

• case Acad::eUnknownDwgVersion: lstrcpy(Glb_AcadErrorInfo, _T(“未知的 DWG 版本”)); break;

• case Acad::eHandleExistsAlready: lstrcpy(Glb_AcadErrorInfo, _T(“句柄已存在”)); break;

• case Acad::eNullPtr: lstrcpy(Glb_AcadErrorInfo, _T(“空指针”)); break;

• case Acad::eNoLongerApplicable: lstrcpy(Glb_AcadErrorInfo, _T(“不再适用”)); break;

• case Acad::eEntityInInactiveLayout: lstrcpy(Glb_AcadErrorInfo, _T(“非活动布局中的实体”)); break;

• case Acad::eCannotRestoreFromAcisFile: lstrcpy(Glb_AcadErrorInfo, _T(“无法从 ACIS 文件中恢复”)); break;

• case Acad::eInvalidInput: lstrcpy(Glb_AcadErrorInfo, _T(“无效的输入”)); break;

• 内存不足：case Acad::eOutOfMemory: lstrcpy(Glb_AcadErrorInfo, _T(“内存不足”)); break;

• 锁定错误：case Acad::eLockViolation: lstrcpy(Glb_AcadErrorInfo, _T(“锁定错误”)); break;

• 无法打开文件：case Acad::eFileNotFound: lstrcpy(Glb_AcadErrorInfo, _T(“无法打开文件”)); break;

• 访问被拒绝：case Acad::eAccessDenied: lstrcpy(Glb_AcadErrorInfo, _T(“访问被拒绝”)); break;

• 无效的DWG文件格式：case Acad::eInvalidDwgVersion: lstrcpy(Glb_AcadErrorInfo, _T(“无效的DWG文件格式”)); break;

• 无效的组码：case Acad::eInvalidGroupCode: lstrcpy(Glb_AcadErrorInfo, _T(“无效的组码”)); break;

• 无效的块名称：case Acad::eBadDxfSequence: lstrcpy(Glb_AcadErrorInfo, _T(“无效的块名称”)); break;

• 无效的段落类型：case Acad::eBadDxfLineNumber: lstrcpy(Glb_AcadErrorInfo, _T(“无效的段落类型”)); break;

• 命令错误：case Acad::eCommandWasInProgress: lstrcpy(Glb_AcadErrorInfo, _T(“命令错误”)); break;

• 对象未找到：case Acad::eNullObjectId: lstrcpy(Glb_AcadErrorInfo, _T(“对象未找到”)); break;

• 错误的对象类型：case Acad::eWrongObjectType: lstrcpy(Glb_AcadErrorInfo, _T(“错误的对象类型”)); break;

• 不支持的版本：case Acad::eNotImplementedYet: lstrcpy(Glb_AcadErrorInfo, _T(“不支持的版本”)); break;

• 数据错误：case Acad::eDataError: lstrcpy(Glb_AcadErrorInfo, _T(“数据错误”)); break;

• 错误的指针：case Acad::eInvalidIndex: lstrcpy(Glb_AcadErrorInfo, _T(“错误的指针”)); break;

• 无效的ID：case Acad::eInvalidIxDxf: lstrcpy(Glb_AcadErrorInfo, _T(“无效的ID”)); break;

• 错误的参数：case Acad::eBadDxfFile: lstrcpy(Glb_AcadErrorInfo, _T(“错误的参数”)); break;

• 不支持的操作：case Acad::eUnsupportedDwgVersion: lstrcpy(Glb_AcadErrorInfo, _T(“不支持的操作”)); break;

• 未知错误：default: lstrcpy(Glb_AcadErrorInfo, _T(“未知错误”)); break;