If you need to manage a Solaris 10 box with a minimal install, and SSH is not available, you can install it off of the 2nd CD. Rather than figure out the path to your CDROM (see this article), it was easier in our case to just tar up the needed packages and FTP them to our Solaris box:
root@srv-3 Product # cp -R SUNWsshcu SUNWsshdr SUNWsshdu SUNWsshr SUNWsshu /home/srv-1/sshpkg/ root@srv-3 Product # cd /home/srv-1/sshpkg/ root@srv-3 sshpkg # ls SUNWsshcu SUNWsshdr SUNWsshdu SUNWsshr SUNWsshu root@srv-3 sshpkg # tar -cf ../ssh.tar * root@srv-3 sshpkg # tar -tf ../ssh.tar SUNWsshcu/ SUNWsshcu/archive/ . . . SUNWsshu/reloc/ SUNWsshu/reloc/usr/ SUNWsshu/reloc/usr/bin/ SUNWsshu/reloc/usr/lib/ SUNWsshu/reloc/usr/lib/ssh/ root@srv-3 sshpkg # |
On the Solaris side, FTP these to /tmp, then from tmp:
tar -xf ssh.tar pkgadd -d . svcadm enable ssh svcadm restart ssh |
vi /etc/ssh/sshd_config
....
# Are root logins permitted using sshd.
# Note that sshd uses pam_authenticate(3PAM) so the root (or any other) user
# maybe denied access by a PAM module regardless of this setting.
# Valid options are yes, without-password, no.
PermitRootLogin yes
....