Why messages like '[rdisc/nm-lndp-rdisc.c:251] send_rs(): (team0.112): cannot send router solicitati

Environment

• Red Hat Enterprise Linux 7
• NetworkManager

Issue

• What do the following messages in Red Hat Enterprise Linux logging mean?

  Raw

  Aug 25 08:59:53 abc NetworkManager[969]: <error> [1440485993.699311] [rdisc/nm-lndp-rdisc.c:251] send_rs(): (team0.112): cannot send router solicitation: -101.
  Aug 25 08:59:53 abc NetworkManager[969]: <error> [1440485993.699360] [rdisc/nm-lndp-rdisc.c:251] send_rs(): (team0.2111): cannot send router solicitation: -101.
  Aug 25 08:59:57 abc NetworkManager[969]: <error> [1440485997.699521] [rdisc/nm-lndp-rdisc.c:251] send_rs(): (team0.112): cannot send router solicitation: -101.
  

Resolution

• For each active network connection, set the ipv6.method property value to ignore. After making the property change, bring the connection up. For example, the following sets the property on a connection named MyConnection:

  Raw

  # nmcli connection modify MyConnection ipv6.method ignore
  # nmcli connection up MyConnection
  

• Alternatively, enabling the IPv6 protocol at the kernel level will avoid the issue:

  • How do I disable or enable the IPv6 protocol in Red Hat Enterprise Linux?

Root Cause

• This error is seen when the IPv6 protocol is disabled at the kernel level yet the IP network configuration is set to expect IPv6 to be available.

Diagnostic Steps

• Verify that the NetworkManager service is in use:

  Raw

  # systemctl status NetworkManager.service
  

• Verify the IPv6 protocol is disabled for some or all interfaces. If the net.ipv6.conf.all.disable_ipv6 sysctl is set to 1 or any specific interface sysctl is set to 1 then IPv6 is disabled for all or some interfaces:

  Raw

  $ sysctl -a | grep disable_ipv6
  

• Verify the current ipv6.method property setting for each network connection. The following example commands list known connections and then checks the ipv6.method property of one:

• 其实这个ipv6.method可以在nmcli设置时设置成ipv6.method ignore，当然这个参数也是在网卡配置文件里的IPV6INIT=no
  Raw

  # nmcli connection show
  NAME        UUID                                  TYPE            DEVICE     
  port1       674dd62a-1d02-4108-9a94-e1f15ece0d25  802-3-ethernet  eno1       
  team0       16e653cb-aeb1-4bfc-8897-d6e91ed21efd  team            team0      
  usb0        ccfdbab0-fc88-0959-3a1a-14ca9e37cc0a  802-3-ethernet  --         
  port2       cd52a24e-bf12-435b-81e4-d4dd8732a762  802-3-ethernet  enp8s10    
  bridge0     c2065805-788a-4ca0-ba75-dd15db62cc6e  bridge          bridge0  
  
  # nmcli connection show bridge0 | grep ipv6.method
  ipv6.method:                            auto
  

• Product(s)
•  
• Red Hat Enterprise Linux

• Component
•  
• NetworkManager

• Category
•  
• Troubleshoot

• Tags
•  
• ipv6
•  
• network
•  
• networking
•  
• NetworkManager
•  
• rhel_7

This solution is part of Red Hat’s fast-track publication program, providing a huge library of solutions that Red Hat engineers have created while supporting our customers. To give you the knowledge you need the instant it becomes available, these articles may be presented in a raw and unedited form.