Nordic ADC 转换

最新推荐文章于 2023-10-23 15:09:21 发布

二狗蹲坑

最新推荐文章于 2023-10-23 15:09:21 发布

阅读量297

点赞数

分类专栏： Nordic BLE 系列文章标签： NRF52 ADC

本文链接：https://blog.csdn.net/vince025/article/details/105517374

版权

Nordic BLE 系列专栏收录该内容

4 篇文章 0 订阅

订阅专栏

The absolute maximum voltage on any pin is <VDD+0.3V, the maximum VDD is 3.6V. If you have supplied 5V to an input, then you may have damaged the chip.

If you use internal reference as reference (0.6V), then the measured signal must be between 0V and 0.6V. You have a gain control register that can divide the input voltage by 1/6 to for instance support up to 3.6V analog input.

Example:

If you measure on a 3V input signal, using internal reference (0.6) and 1/6 gain, then the measurement should be about (3/6)/0.6 = 0.833 of the max ADC value. The max ADC value depend on how many bit resolution you have configured, but for instance with 10-bit resolution the max value is 2^10 = 1024. So in that case the ADC measurement will be 0.833 * 1024 = 853 decimal value when a 3V input is applied.