红外接收头TSOP34838连续通信能力

一般红外通信在通信过程中都会有连续通信时间的限制。
TSOP34838 也不例外，按照技术资料要求：被调制信
号的脉冲宽度不小于10 个载波周期，当连续发送
10 ~ 70 个载波时至少需要14 个载波周期的休息时
间，详细的技术资料可以参考Vishay 公司网站［18］。这
样，则必须对发送的数据进行编码以令其符合接收
头的要求，但无论是采用软件编解码还是加硬件编
解码器都将是一件麻烦的事情。

被调制信号的脉冲宽度不小于263 μs。脉冲间隔不小于368.2μs。

• Carrier frequency should be close to 38kHz.
• Burst length should be 10 cycles/burst or longer.
• After each burst which is between 10 cycles and 70 cycles a gap time of at least 14 cycles is neccessary.
• For each burst which is longer than 1.8ms a corresponding gap time is necessary at some time in the data stream. This gap time should be at least 4 times longer than the burst.
• Up to 800 short bursts per second can be received continuously.