virbr0

virsh net-list // 列出所有端口
virsh net-list -all

[root@5201351 ~]# virsh net-destroy default //重启libvirtd服务后会恢复
[root@5201351 ~]# virsh net-undefine default //彻底删除，重启系统后也不会恢复

恢复virbr0的方法

恢复的方法，我们需要从另一台kvm宿主机上把default.xml文件复制过来，并将下面的标签对及标签去掉。

<!--
WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE 
OVERWRITTEN AND LOST. Changes to this xml configuration should be made using:
  virsh net-edit default
or other application using the libvirt API.
-->

<network>
  <name>default</name>
  <uuid>ef1080c8-61d0-421e-8358-0568afb21093</uuid>
  <forward mode='nat'/>
  <bridge name='virbr0' stp='on' delay='0' />
  <mac address='52:54:00:01:59:93'/>
  <ip address='192.168.122.1' netmask='255.255.255.0'>
    <dhcp>
      <range start='192.168.122.2' end='192.168.122.254' />
    </dhcp>
  </ip>
</network>

2、从一个xml文件定义default网络，执行如下命令：

[root@5201351 ~]# virsh net-define /var/lib/libvirt/network/default.xml //从一个default.xml文件定义(但不开始)一个网络

3、设置virbr0自动启动，执行如下命令：

[root@5201351 ~]# virsh net-start default //开始一个(以前定义的default)不活跃的网络,执行后ifconfig可见virbr0
[root@5201351 ~]# virsh net-autostart default //执行后Autostart外会变成yes

error: Failed to connect socket to ‘/var/run/libvirt/libvirt-sock’: No

sudo apt-get install virt-manager