1、查询模块目前的频段,下面的频段是3频段。
2、读到频段的信号为e8转化为十进制除以10就是23.2dbm的增益
3、AT+QNVFW="/nv/item_files/rfnv/00020994",0100F500指令修改增加增益。
Power
dBm
21
21.5
22
22.5
23
23.5
24
24.5
Value
HEX
D2
D7
DC
E1
E6
EB
F0
F5
Table 2: LTE TX power value
NOTE:
1. NV command will effect after module restart.After restart module,please also send read command to
check if you set the value successful.
2. The MAX TX power value for LTE was 24.5 dBm.Do not setting bigger value to module.
3.2. WCDMA band TX power configuration
3.2.1. WCDMA TX Power read and write command
Read command format:
AT+QNVR
=
539
,0
+QNVR: "9B9EA0
A3A3
A3A5A6"
OK
Write command format:
AT+QNVW
=
539
,0,"9B9EA0
A3A3
A3A5A6"
Red part:
AT Command
Green part:
Each band setting ID.Please get it from table 1.
Blue part:
TX power Value, this value was made up by the two same setting value . It should be
A3 A3.
3.2.2. TX Power Calculate method
AT+QNVW
=
539
,0,"9B9EA0
A3A3
A3A5A6"
In this command, 9B9EA0
A3A3
A3A5A6 was HEX data.For the blue part was the TX power value which
should write and set to module.
With the blue part,we could calculate the TX power as below:
HEX DEC
A3 -----> 163
TX power = 163/10+6.7 = 23 dBm
So for example,if you want to set WCDMA BAND 1 TX power as 22 dBm, the calculation as below:
Step 1: Get WCDMA BAND 1 write command from table 1:
AT+QNVW=539,0,"9B9EA0
A3A3
A3A5A6"
Step 2: Calculate the setting value
22 dBm = (22-6.7)*10= 0x99
Step 3: sending command to module:
AT+QNVW=539,0,"9B9EA0
9999
A3A5A6"
Some TX power value were show in below table:
Table 3: WCDMA TX power value
Power
dBm
21
21.5
22
22.5
23
23.5
24
24.5
Value
HEX
8F
94
99
9E
A3
A8
AD
B2
NOTE:
1. NV command will effect after module restart.After reestart module,please also send read command to
check if you set the value successful.
2. The MAX TX power value for WCDMA was 24.5 dBm.Do not setting bigger value to module.