1.下载fabric-samples源代码
2.配置crypto-config.yaml,作用是在用二进制文件生成证书文件的时使用
cryptogen 二进制工具,在fabric-samples/bin目录下
生成证书命令如下:
./cryptogen generate --config=./crypto-config.yaml
下面我们来分配一下fabric网络布局:
4peer+3orderer | node1 | node2 | node3 | node4 |
IP | x.x.x.1 | x.x.x.2 | x.x.x.2 | x.x.x.4 |
peer | peer0.org1.example.com:7051 | peer1.org1.example.com:7051 | peer0.org2.example.com:7051 | peer1.org2.example.com:7051 |
couchdb | yes | yes | yes | yes |
cli | yes | yes | yes | yes |
orderer | orderer1.example:7050 | orderer2.example:7050 | orderer3.example:7050 | no |
kafka | kafka0 | kafka1 | kafka2 | kafka3 |
zookeeper | zookeeper0 | zookeeper1 | zookeeper2 | no |
修改后的配置文件如下:
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
# ---------------------------------------------------------------------------
# "OrdererOrgs" - Definition of organizations managing orderer nodes
# ---------------------------------------------------------------------------
OrdererOrgs:
# ---------------------------------------------------------------------------
# Orderer
# ---------------------------------------------------------------------------
- Name: Orderer
Domain: example.com
CA:
Country: US
Province: California
Locality: San Francisco
# ---------------------------------------------------------------------------
# "Specs" - See PeerOrgs below for complete description
# ---------------------------------------------------------------------------
Specs:
- Hostname: orderer1
- Hostname: orderer2
- Hostname: orderer3
# ---------------------------------------------------------------------------
# "PeerOrgs" - Definition of organizations managing peer nodes
# ---------------------------------------------------------------------------
PeerOrgs:
# ---------------------------------------------------------------------------
# Org1
# ---------------------------------------------------------------------------
- Name: Org1
Domain: org1.example.com
EnableNodeOUs: true
CA:
Country: US
Province: California
Locality: San Francisco
# ---------------------------------------------------------------------------
# "Specs"
# ---------------------------------------------------------------------------
# Uncomment this section to enable the explicit definition of hosts in your
# configuration. Most users will want to use Template, below
#
# Specs is an array of Spec entries. Each Spec entry consists of two fields:
# - Hostname: (Required) The desired hostname, sans the domain.
# - CommonName: (Optional) Specifies the template or explicit override for
# the CN. By default, this is the template:
#
# "{{.Hostname}}.{{.Domain}}"
#
# which obtains its values from the Spec.Hostname and
# Org.Domain, respectively.
# ---------------------------------------------------------------------------
Specs:
- Hostname: peer0 # implicitly "foo.org1.example.com"
CommonName: peer0.org1.example.com # overrides Hostname-based FQDN set above
- Hostname: peer1
CommonName: peer1.org1.example.com
# - Hostname: baz
# ---------------------------------------------------------------------------
# "Template"
# ---------------------------------------------------------------------------
# Allows for the definition of 1 or more hosts that are created sequentially
# from a template. By default, this looks like "peer%d" from 0 to Count-1.
# You may override the number of nodes (Count), the starting index (Start)
# or the template used to construct the name (Hostname).
#
# Note: Template and Specs are not mutually exclusive. You may define both
# sections and the aggregate nodes will be created for you. Take care with
# name collisions
# ---------------------------------------------------------------------------
# Template:
# Count: 2
# Start: 5
# Hostname: {{.Prefix}}{{.Index}} # default
# ---------------------------------------------------------------------------
# "Users"
# ---------------------------------------------------------------------------
# Count: The number of user accounts _in addition_ to Admin
# ---------------------------------------------------------------------------
Users:
Count: 1
# ---------------------------------------------------------------------------
# Org2: See "Org1" for full specification
# ---------------------------------------------------------------------------
- Name: Org2
Domain: org2.example.com
EnableNodeOUs: true
CA:
Country: US
Province: California
Locality: San Francisco
Specs:
- Hostname: peer0 # implicitly "foo.org1.example.com"
CommonName: peer0.org2.example.com # overrides Hostname-based FQDN set above
- Hostname: peer1
CommonName: peer1.org2.example.com
# Template:
# Count: 2
Users:
Count: 1
3.配置configtx.yaml,configtx.yaml 在生成创世块、锚节点以及根据xxx.tx文件生成channel的时候使用
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
---
################################################################################
#
# Section: Organizations
#
# - This section defines the different organizational identities which will
# be referenced later in the configuration.
#
################################################################################
Organizations:
# SampleOrg defines an MSP using the sampleconfig. It should never be used
# in production but may be used as a template for other definitions
- &OrdererOrg
# DefaultOrg defines the organization which is used in the sampleconfig
# of the fabric.git development environment
Name: OrdererOrg
# ID to load the MSP definition as
ID: OrdererMSP
# MSPDir is the filesystem path which contains the MSP configuration
MSPDir: crypto-config/ordererOrganizations/example.com/msp
- &Org1
# DefaultOrg defines the organization which is used in the sampleconfig
# of the fabric.git development environment
Name: Org1MSP
# ID to load the MSP definition as
ID: Org1MSP
MSPDir: crypto-config/peerOrganizations/org1.example.com/msp
AnchorPeers:
# AnchorPeers defines the location of peers which can be used
# for cross org gossip communication. Note, this value is only
# encoded in the genesis block in the Application section context
- Host: peer0.org1.example.com
Port: 7051
- &Org2
# DefaultOrg defines the organization which is used in the sampleconfig
# of the fabric.git development environment
Name: Org2MSP
# ID to load the MSP definition as
ID: Org2MSP
MSPDir: crypto-config/peerOrganizations/org2.example.com/msp
AnchorPeers:
# AnchorPeers defines the location of peers which can be used
# for cross org gossip communication. Note, this value is only
# encoded in the genesis block in the Application section context
- Host: peer0.org2.example.com
Port: 7051
################################################################################
#
# SECTION: Capabilities
#
# - This section defines the capabilities of fabric network. This is a new
# concept as of v1.1.0 and should not be utilized in mixed networks with
# v1.0.x peers and orderers. Capabilities define features which must be
# present in a fabric binary for that binary to safely participate in the
# fabric network. For instance, if a new MSP type is added, newer binaries
# might recognize and validate the signatures from this type, while older
# binaries without this support would be unable to validate those
# transactions. This could lead to different versions of the fabric binaries
# having different world states. Instead, defining a capability for a channel
# informs those binaries without this capability that they must cease
# processing transactions until they have been upgraded. For v1.0.x if any
# capabilities are defined (including a map with all capabilities turned off)
# then the v1.0.x peer will deliberately crash.
#
################################################################################
Capabilities:
# Channel capabilities apply to both the orderers and the peers and must be
# supported by both. Set the value of the capability to true to require it.
Global: &ChannelCapabilities
# V1.1 for Global is a catchall flag for behavior which has been
# determined to be desired for all orderers and peers running v1.0.x,
# but the modification of which would cause incompatibilities. Users
# should leave this flag set to true.
V1_1: true
# Orderer capabilities apply only to the orderers, and may be safely
# manipulated without concern for upgrading peers. Set the value of the
# capability to true to require it.
Orderer: &OrdererCapabilities
# V1.1 for Order is a catchall flag for behavior which has been
# determined to be desired for all orderers running v1.0.x, but the
# modification of which would cause incompatibilities. Users should
# leave this flag set to true.
V1_1: true
# Application capabilities apply only to the peer network, and may be safely
# manipulated without concern for upgrading orderers. Set the value of the
# capability to true to require it.
Application: &ApplicationCapabilities
# V1.2 for Application is a catchall flag for behavior which has been
# determined to be desired for all peers running v1.0.x, but the
# modification of which would cause incompatibilities. Users should
# leave this flag set to true.
V1_2: true
################################################################################
#
# SECTION: Application
#
# - This section defines the values to encode into a config transaction or
# genesis block for application related parameters
#
################################################################################
Application: &ApplicationDefaults
# Organizations is the list of orgs which are defined as participants on
# the application side of the network
Organizations:
################################################################################
#
# SECTION: Orderer
#
# - This section defines the values to encode into a config transaction or
# genesis block for orderer related parameters
#
################################################################################
Orderer: &OrdererDefaults
# Orderer Type: The orderer implementation to start
# Available types are "solo" and "kafka"
OrdererType: kafka
Addresses:
- orderer1.example.com:7050
- orderer2.example.com:7050
- orderer3.example.com:7050
# Batch Timeout: The amount of time to wait before creating a batch
BatchTimeout: 2s
# Batch Size: Controls the number of messages batched into a block
BatchSize:
# Max Message Count: The maximum number of messages to permit in a batch
MaxMessageCount: 10
# Absolute Max Bytes: The absolute maximum number of bytes allowed for
# the serialized messages in a batch.
AbsoluteMaxBytes: 99 MB
# Preferred Max Bytes: The preferred maximum number of bytes allowed for
# the serialized messages in a batch. A message larger than the preferred
# max bytes will result in a batch larger than preferred max bytes.
PreferredMaxBytes: 512 KB
Kafka:
# Brokers: A list of Kafka brokers to which the orderer connects
# NOTE: Use IP:port notation
Brokers:
- kafka0:9092
- kafka1:9092
- kafka2:9092
- kafka3:9092
# Organizations is the list of orgs which are defined as participants on
# the orderer side of the network
Organizations:
################################################################################
#
# Profile
#
# - Different configuration profiles may be encoded here to be specified
# as parameters to the configtxgen tool
#
################################################################################
Profiles:
TwoOrgsOrdererGenesis:
Capabilities:
<<: *ChannelCapabilities
Orderer:
<<: *OrdererDefaults
Organizations:
- *OrdererOrg
Capabilities:
<<: *OrdererCapabilities
Consortiums:
SampleConsortium:
Organizations:
- *Org1
- *Org2
TwoOrgsChannel:
Consortium: SampleConsortium
Application:
<<: *ApplicationDefaults
Organizations:
- *Org1
- *Org2
Capabilities:
<<: *ApplicationCapabilities
4.zookeeper.yaml配置
ZOO_MY_ID:1 此属性向上累加1
version: '2'
services:
zookeeper0:
container_name: zookeeper0
hostname: zookeeper0
image: hyperledger/fabric-zookeeper:amd64-0.4.10
restart: always
environment:
- ZOO_MY_ID=1
- ZOO_SERVERS=server.1=zookeeper0:2888:3888 server.2=zookeeper1:2888:3888 server.3=zookeeper2:2888:3888 quorumListenOnAllIPs=true
ports:
- "2181:2181"
- "2888:2888"
- "3888:3888"
extra_hosts:
- "zookeeper0:x.x.x.1"
- "zookeeper1:x.x.x.2"
- "zookeeper2:x.x.x.3"
- "kafka0:x.x.x.1"
- "kafka1:x.x.x.2"
- "kafka2:x.x.x.3"
- "kafka3:x.x.x.4"
5.kafka.yaml配置
KAFKA_BROKER_ID 此属性值向上累加
version: '2'
services:
kafka1:
container_name: kafka1
hostname: kafka1
image: hyperledger/fabric-kafka
restart: always
environment:
- KAFKA_BROKER_ID=1
- KAFKA_MIN_INSYNC_REPLICAS=2
- KAFKA_DEFAULT_REPLICATION_FACTOR=3
- KAFKA_ZOOKEEPER_CONNECT=zookeeper0:2181,zookeeper1:2181,zookeeper2:2181
- KAFKA_UNCLEAN_LEADER_ELECTION_ENABLE=false
ports:
- "9092:9092"
extra_hosts:
- "zookeeper0:x.x.x.1"
- "zookeeper1:x.x.x.2"
- "zookeeper2:x.x.x.3"
- "kafka0:x.x.x.1"
- "kafka1:x.x.x.2"
- "kafka2:x.x.x.3"
- "kafka3:x.x.x.4"
6.orderer.yaml
version: '2'
services:
orderer1.example.com:
container_name: orderer1.example.com
image: hyperledger/orderer:amd64-1.2.0
environment:
- GODEBUG=netdns=go
- ORDERER_GENERAL_LOGLEVEL=INFO
- ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
- ORDERER_GENERAL_LISTENPORT=7050
- ORDERER_GENERAL_GENESISMETHOD=file
- ORDERER_GENERAL_GENESISFILE=/var/hyperledger/orderer/orderer.genesis.block
- ORDERER_GENERAL_LOCALMSPID=OrdererMSP
- ORDERER_GENERAL_LOCALMSPDIR=/var/hyperledger/orderer/msp
- ORDERER_GENERAL_TLS_ENABLED=true
- ORDERER_GENERAL_TLS_PRIVATEKEY=/var/hyperledger/orderer/tls/server.key
- ORDERER_GENERAL_TLS_CERTIFICATE=/var/hyperledger/orderer/tls/server.crt
- ORDERER_GENERAL_TLS_ROOTCAS=[/var/hyperledger/orderer/tls/ca.crt]
- ORDERER_KAFKA_RETRY_LONGINTERVAL=10s
- ORDERER_KAFKA_RETRY_LONGTOTAL=100s
- ORDERER_KAFKA_RETRY_SHORTINTERVAL=1s
- ORDERER_KAFKA_RETRY_SHORTTOTAL=30s
- ORDERER_KAFKA_VERBOSE=true
- ORDERER_KAFKA_BROKERS=[x.x.x.1:9092,x.x.x.2:9092,x.x.x.3:9092,x.x.x.4:9092]
working_dir: /opt/gopath/src/github.com/hyperledger/fabric
command: orderer
volumes:
- ./channel-artifacts/genesis.block:/var/hyperledger/orderer/orderer.genesis.block
- ./crypto-config/ordererOrganizations/example.com/orderers/orderer1.example.com/msp:/var/hyperledger/orderer/msp
- ./crypto-config/ordererOrganizations/example.com/orderers/orderer1.example.com/tls/:/var/hyperledger/orderer/tls
ports:
- 7050:7050
extra_hosts:
- "kafka0:x.x.x.1"
- "kafka1:x.x.x.2"
- "kafka2:x.x.x.3"
- "kafka3:x.x.x.4"
下节待续......