vmware -centos6.5和centos7静态IP配置

1、下载vmware和centos6.5

2、选择net8

3、配置ip路由

4、编辑 NAT模式

5、NAT设置

6、配置DBCP

7、查看MAC地址

8、设置8. 静态IP  

centos6.x配置如下

vim /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE=eth0
BOOTPROTO=static
HWADDR=00:0C:29:A4:E3:9C
IPV6INIT=yes
NM_CONTROLLED=yes
ONBOOT=yes
TYPE=Ethernet
UUID="e6ecacb0-4608-47f9-b56c-49c5d2f61e2a"
IPADDR=192.168.95.150
NETMASK=255.255.255.0
GATEWAY=192.168.95.2
DNS1=8.8.8.8

centos7的配置如下

/etc/sysconfig/network-scripts/ifcfg-eno16777736
TYPE=Ethernet
NAME=eth0
BOOTPROTO=static
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
UUID=ea35e10e-ff50-4a7a-92d5-ab54c58d8b44
IPADDR=192.168.1.12
NETMASK=255.255.255.0
GATEWAY=192.168.1.2
HWADDR=00:0C:29:90:4F:E3
ONBOOT=yes
DNS1=8.8.8.8

service network restart
systemctl stop firewalld
//禁止开机启动
systemctl disable firewalld

9、vi /etc/sysconfig/network

NETWORKING=yes　　　　　　　　　　　　　　　　　　#确认是否设置为yes

10、’切换root权限去操作  su

service network restart

11、ip addr  或者ifconfig