043、TiDB特性_缓存表和分区表

数哥

已于 2023-12-25 21:44:06 修改

阅读量676

点赞数

分类专栏： TiDB从入门到精通文章标签： tidb 缓存数据库

于 2023-07-15 06:43:29 首次发布

本文链接：https://blog.csdn.net/wangzhicheng987/article/details/130785819

版权

TiDB从入门到精通专栏收录该内容

67 篇文章 9 订阅

订阅专栏

针对于优化器在索引存在时依然使⽤全表扫描的情况下，使⽤缓存表和分区表是提升查询性能的有效⼿段。
在这里插入图片描述

缓存表

缓存表是将表的内容完全缓存到 TiDB Server 的内存中
表的数据量不⼤,⼏乎不更改
读取很频繁
缓存控制: ALTER TABLE table_name CACHE|NOCACHE;

# 使用trace跟踪下
tidb> TRACE SELECT * FROM test.c1;
+-------------------------------------------+-----------------+---
---------+
| operation | startTS |
duration |
+-------------------------------------------+-----------------+---
---------+
| trace | 18:39:25.485266 |
501.582µs |
| ├─session.ExecuteStmt | 18:39:25.485270 |
432.208µs |
| │ ├─executor.Compile | 18:39:25.485281 |
132.616µs |
| │ └─session.runStmt | 18:39:25.485433 |
249.488µs |
| │ └─UnionScanExec.Open | 18:39:25.485572 |
72.776µs |
| │ ├─TableReaderExecutor.Open | 18:39:25.485575 |
13.24µs |
| │ ├─buildMemTableReader | 18:39:25.485605 |
3.283µs |
| │ └─memTableReader.getMemRows | 18:39:25.485615 |   # memTableReader.getMemRows 表示从缓存取数
20.558µs |
| ├─*executor.ProjectionExec.Next | 18:39:25.485712 |
12.911µs |
| │ └─*executor.UnionScanExec.Next | 18:39:25.485714 |
3.823µs |
| └─*executor.ProjectionExec.Next | 18:39:25.485733 |
8.943µs |
| └─*executor.UnionScanExec.Next | 18:39:25.485735 |
1.33µs |
+-------------------------------------------+-----------------+---
---------+
12 rows in set (0.00 sec)

小表缓存-原理

在这里插入图片描述

缓存租约

租约时间内，无法进行写操作
租约到期，数据过期
写操作不再被阻塞
读写直接到TiKV节点上执行
数据更新完毕，租约继续开启

在这里插入图片描述

应用场景

每张缓存表的大小限制为64MB
适用于查询频繁、数据量不大、修改极少的场景
在租约(tidb_table_cache_lease) 时间内，写操作会被阻塞
当租约到期(tidb_table_cache_lease)时，读性能会下降
不支持对缓存表直接做DDL操作，需要先关闭
对于表加载较慢或者极少修改的表，可以适当延长tidb_table_cache_lease保持读性能稳定

分区表

分区类型与适用场景

range: 分区剪裁，节省IO开销
Hash: 用于大规模写入的情况下将数据打散，平均地分配到各个分区里

Range分区表
create table t1(x int) partition by name(x) (
partition p0 values less than(5),
partition p1 values less than (10));
)

分区类型与适⽤场景

Range

分区裁剪, 节省 I/O 开销

/* Range Partition t1 */
drop table if exists test.t1;
create table test.t1 (x int) partition by range (x) (
 partition p0 values less than (5),
 partition p1 values less than (10));
insert into test.t1 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
/* Check Partition Pruning */
explain select * from test.t1 where x between 1 and 4;

查看执行计划
mysql> explain select * from test.t1 where x between 1 and 4;
+-------------------------+-----------+-----------+------------------------+------------------------------------+
| id                      | estRows   | task      | access object          | operator info                      |
+-------------------------+-----------+-----------+------------------------+------------------------------------+
| TableReader_9           | 12288.00  | root      |                        | data:Selection_8                   |
| └─Selection_8           | 12288.00  | cop[tikv] |                        | ge(test.t1.x, 1), le(test.t1.x, 4) |
|   └─TableFullScan_7     | 491520.00 | cop[tikv] | table:t1, partition:p0 | keep order:false                   |
+-------------------------+-----------+-----------+------------------------+------------------------------------+
3 rows in set (0.03 sec)

/* Check regions */
show table test.t1 regions;
mysql> show table test.t1 regions;
+-----------+-----------+---------+-----------+-----------------+-------+------------+---------------+------------+----------------------+------------------+
| REGION_ID | START_KEY | END_KEY | LEADER_ID | LEADER_STORE_ID | PEERS | SCATTERING | WRITTEN_BYTES | READ_BYTES | APPROXIMATE_SIZE(MB) | APPROXIMATE_KEYS |
+-----------+-----------+---------+-----------+-----------------+-------+------------+---------------+------------+----------------------+------------------+
|      5019 | t_79_     | t_80_   |      5020 |            1001 | 5020  |          0 |             0 |          0 |                   67 |           877551 |
|      1002 | t_80_     |         |      1003 |            1001 | 1003  |          0 |             0 |          0 |                   24 |           421921 |
+-----------+-----------+---------+-----------+-----------------+-------+------------+---------------+------------+----------------------+------------------+
2 rows in set (0.02 sec)

Hash

可以⽤于⼤规模写⼊的情况下将数据打散, 平均地分配到各个分区⾥

/* Hash Partition t1 */
drop table if exists test.t1;
CREATE TABLE test.t1 (x INT)
 PARTITION BY HASH(x)
 PARTITIONS 4;

insert into test.t1 values (0),(1),(2),(3),(4),(5),(6),(7),(8),(9);
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;
insert into test.t1 select * from test.t1;

查看分区的执行计划

默认是通过mod方式分配分区

/* Check Partition Distribution */

explain select * from test.t1 where x=0;
explain select * from test.t1 where x=1;
explain select * from test.t1 where x=2;
explain select * from test.t1 where x=3;
explain select * from test.t1 where x=4;
explain select * from test.t1 where x=5;
explain select * from test.t1 where x=6;
explain select * from test.t1 where x=7;
explain select * from test.t1 where x=8;
explain select * from test.t1 where x=9;
/* Negative */
explain select * from test.t1 where x between 7 and 9;
mysql> explain select * from test.t1 where x between 7 and 9;
+------------------------------+----------+-----------+------------------------+------------------------------------+
| id                           | estRows  | task      | access object          | operator info                      |
+------------------------------+----------+-----------+------------------------+------------------------------------+
| PartitionUnion_10            | 750.00   | root      |                        |                                    |
| ├─TableReader_13             | 250.00   | root      |                        | data:Selection_12                  |
| │ └─Selection_12             | 250.00   | cop[tikv] |                        | ge(test.t1.x, 7), le(test.t1.x, 9) |
| │   └─TableFullScan_11       | 10000.00 | cop[tikv] | table:t1, partition:p0 | keep order:false, stats:pseudo     |
| ├─TableReader_16             | 250.00   | root      |                        | data:Selection_15                  |
| │ └─Selection_15             | 250.00   | cop[tikv] |                        | ge(test.t1.x, 7), le(test.t1.x, 9) |
| │   └─TableFullScan_14       | 10000.00 | cop[tikv] | table:t1, partition:p1 | keep order:false, stats:pseudo     |
| └─TableReader_19             | 250.00   | root      |                        | data:Selection_18                  |
|   └─Selection_18             | 250.00   | cop[tikv] |                        | ge(test.t1.x, 7), le(test.t1.x, 9) |
|     └─TableFullScan_17       | 10000.00 | cop[tikv] | table:t1, partition:p3 | keep order:false, stats:pseudo     |
+------------------------------+----------+-----------+------------------------+------------------------------------+
10 rows in set (12.69 sec)

查看region分布情况

/* Check regions */
# 查看对应的region情况，在4个region上
mysql> show table test.t1 regions;
+-----------+-----------+---------+-----------+-----------------+-------+------------+---------------+------------+----------------------+------------------+
| REGION_ID | START_KEY | END_KEY | LEADER_ID | LEADER_STORE_ID | PEERS | SCATTERING | WRITTEN_BYTES | READ_BYTES | APPROXIMATE_SIZE(MB) | APPROXIMATE_KEYS |
+-----------+-----------+---------+-----------+-----------------+-------+------------+---------------+------------+----------------------+------------------+
|      9003 | t_84_     | t_85_   |      9004 |            1001 | 9004  |          0 |      18449249 |   14117466 |                   13 |           141205 |
|      9005 | t_85_     | t_86_   |      9006 |            1001 | 9006  |          0 |      18443067 |   14024508 |                   10 |            58475 |
|      9007 | t_86_     | t_87_   |      9008 |            1001 | 9008  |          0 |      12295360 |    8703102 |                    5 |            27228 |
|      1002 | t_87_     |         |      1003 |            1001 | 1003  |          0 |      12295959 |    9218671 |                    4 |            26666 |
+-----------+-----------+---------+-----------+-----------------+-------+------------+---------------+------------+----------------------+------------------+
4 rows in set (2 min 46.43 sec)