全志R16的parrotv1.1的系统调通摄像头hm1375
2017/8/24 14:04
版本：V1.1
开发板：SC3817R
OS：parrotv1.1（Android4.4.2）
1、
R:\wyb\hm1375_parrotv1.1\android\device\softwinner\astar-evb30\configs\camera.cfg
;-------------------------------------------------------------------------------
; 用于camera的配置
;
; 采用格式:
; key = key_value
; 注意: 每个key需要顶格写;
; key_value紧跟着key后面的等号后面, 位于同一行中;
; key_value限制大小为256字节以内;
;
;-------------------------------------------------------------------------------
;-------------------------------------------------------------------------------
; exif information of "make" and "model"
;-------------------------------------------------------------------------------
key_camera_exif_make = MAKE_A31S
key_camera_exif_model = MODEL_A31ST
;-------------------------------------------------------------------------------
; 1 for single camera, 2 for double camera
;-------------------------------------------------------------------------------
number_of_camera = 1
;-------------------------------------------------------------------------------
; CAMERA_FACING_BACK
; gc0307 hm1375
;-------------------------------------------------------------------------------
camera_id = 0
;-------------------------------------------------------------------------------
; 1 for CAMERA_FACING_FRONT
; 0 for CAMERA_FACING_BACK
;-------------------------------------------------------------------------------
camera_facing = 0
;-------------------------------------------------------------------------------
; 1 for camera without isp(using built-in isp of Axx)
; 0 for camera with isp
;-------------------------------------------------------------------------------
use_builtin_isp = 0
;-------------------------------------------------------------------------------
; camera orientation (0, 90, 180, 270)
;-------------------------------------------------------------------------------
camera_orientation = 90
;-------------------------------------------------------------------------------
; driver device name
;-------------------------------------------------------------------------------
camera_device = /dev/video0
;-------------------------------------------------------------------------------
; device id
; for two camera devices with one CSI
;-------------------------------------------------------------------------------
device_id = 0
used_preview_size = 1
key_support_preview_size = 1280x1024, 1280x960, 1280x720, 640x480
key_default_preview_size = 640x480
used_picture_size = 1
key_support_picture_size = 1280x1024, 1280x960, 1280x720, 640x480
key_default_picture_size = 640x480
used_flash_mode = 0
key_support_flash_mode = on,off,auto
key_default_flash_mode = on
used_color_effect=0
key_support_color_effect = none,mono,negative,sepia,aqua
key_default_color_effect = none
used_frame_rate = 1
key_support_frame_rate = 10
key_default_frame_rate = 10
used_focus_mode = 0
key_support_focus_mode = auto,infinity,macro,fixed,continuous-video,continuous-picture
key_default_focus_mode = auto
used_scene_mode = 0
key_support_scene_mode = auto,portrait,landscape,night,night-portrait,theatre,beach,snow,sunset,steadyphoto,fireworks,sports,party,candlelight,barcode
key_default_scene_mode = auto
used_white_balance = 0
key_support_white_balance = auto,incandescent,fluorescent,warm-fluorescent,daylight,cloudy-daylight
key_default_white_balance = auto
used_exposure_compensation = 1
key_max_exposure_compensation = 3
key_min_exposure_compensation = -3
key_step_exposure_compensation = 1
key_default_exposure_compensation = 0
2、录像的时候需要干掉对1080p分辨率的支持（HM1375最大支持720p）：
R:\wyb\hm1375_parrotv1.1\android\device\softwinner\astar-evb30\configs\media_profiles.xml
<!DOCTYPE MediaSettings [
]>
3、
R:\wyb\hm1375_parrotv1.1\android\device\softwinner\astar-evb30\init.sun8i.rc
#csi module
insmod /system/vendor/modules/videobuf-core.ko
insmod /system/vendor/modules/videobuf-dma-contig.ko
insmod /system/vendor/modules/cam_detect.ko
#insmod /system/vendor/modules/actuator.ko
#insmod /system/vendor/modules/ad5820_act.ko
insmod /system/vendor/modules/cci.ko
insmod /system/vendor/modules/vfe_os.ko
insmod /system/vendor/modules/vfe_subdev.ko
#insmod /system/vendor/modules/gc0307.ko
#insmod /system/vendor/modules/ov2035.ko
#insmod /system/vendor/modules/ov2640.ko
#insmod /system/vendor/modules/ov5640.ko
insmod /system/vendor/modules/hm1375.ko
insmod /system/vendor/modules/vfe_v4l2.ko
4、可选修改：
R:\wyb\hm1375_parrotv1.1\android\device\softwinner\astar-evb30\ueventd.sun8i.rc
/dev/video0 0666 media media
#/dev/video1 0666 media media
5、可选修改：
R:\wyb\hm1375_parrotv1.1\android\frameworks\base\packages\SettingsProvider\res\values\defaults.xml
60000
false
修改为：
1800000
true
6、
R:\wyb\hm1375_parrotv1.1\android\frameworks\base\services\java\com\android\server\BatteryService.java
public final class BatteryService extends Binder {
private static final String TAG = BatteryService.class.getSimpleName();
// private static final boolean DEBUG = false;
private static final boolean DEBUG = true;
private static final int BATTERY_SCALE = 100; // battery capacity is a percentage
// Used locally for determining when to make a last ditch effort to log
// discharge stats before the device dies.
private int mCriticalBatteryLevel;
……
private void sendIntentLocked() {
// Pack up the values and broadcast them to everyone
final Intent intent = new Intent(Intent.ACTION_BATTERY_CHANGED);
intent.addFlags(Intent.FLAG_RECEIVER_REGISTERED_ONLY
| Intent.FLAG_RECEIVER_REPLACE_PENDING);
int icon = getIconLocked(mBatteryProps.batteryLevel);
intent.putExtra(BatteryManager.EXTRA_STATUS, mBatteryProps.batteryStatus);
intent.putExtra(BatteryManager.EXTRA_HEALTH, mBatteryProps.batteryHealth);
intent.putExtra(BatteryManager.EXTRA_PRESENT, mBatteryProps.batteryPresent);
//intent.putExtra(BatteryManager.EXTRA_LEVEL, mBatteryProps.batteryLevel);
intent.putExtra(BatteryManager.EXTRA_LEVEL, 100);
intent.putExtra(BatteryManager.EXTRA_SCALE, BATTERY_SCALE);
intent.putExtra(BatteryManager.EXTRA_ICON_SMALL, icon);
intent.putExtra(BatteryManager.EXTRA_PLUGGED, mPlugType);
//intent.putExtra(BatteryManager.EXTRA_VOLTAGE, mBatteryProps.batteryVoltage);
intent.putExtra(BatteryManager.EXTRA_VOLTAGE, 4200);
intent.putExtra(BatteryManager.EXTRA_TEMPERATURE, mBatteryProps.batteryTemperature);
intent.putExtra(BatteryManager.EXTRA_TECHNOLOGY, mBatteryProps.batteryTechnology);
intent.putExtra(BatteryManager.EXTRA_INVALID_CHARGER, mInvalidCharger);
if (DEBUG) {
Slog.d(TAG, "2016/12/05 10:41 wenyuanbo **** Sending ACTION_BATTERY_CHANGED. level:" + mBatteryProps.batteryLevel +
", scale:" + BATTERY_SCALE + ", status:" + mBatteryProps.batteryStatus +
", health:" + mBatteryProps.batteryHealth + ", present:" + mBatteryProps.batteryPresent +
", voltage: " + mBatteryProps.batteryVoltage +
", temperature: " + mBatteryProps.batteryTemperature +
", technology: " + mBatteryProps.batteryTechnology +
", AC powered:" + mBatteryProps.chargerAcOnline + ", USB powered:" + mBatteryProps.chargerUsbOnline +
", Wireless powered:" + mBatteryProps.chargerWirelessOnline +
", icon:" + icon + ", invalid charger:" + mInvalidCharger);
}
mHandler.post(new Runnable() {
@Override
public void run() {
ActivityManagerNative.broadcastStickyIntent(intent, null, UserHandle.USER_ALL);
}
});
}
……
}
7、低电量的时候摄像头会被关闭：
R:\wyb\hm1375_parrotv1.1\android\packages\apps\Camera2\src\com\android\camera\CameraActivity.java
import static com.android.camera.CameraManager.CameraOpenErrorCallback;
public class CameraActivity extends Activity
implements ModuleSwitcher.ModuleSwitchListener,
ActionBar.OnMenuVisibilityListener,
ShareActionProvider.OnShareTargetSelectedListener {
private static final String TAG = "CAM_Activity";
private static final String INTENT_ACTION_STILL_IMAGE_CAMERA_SECURE =
"android.media.action.STILL_IMAGE_CAMERA_SECURE";
public static final String ACTION_IMAGE_CAPTURE_SECURE =
"android.media.action.IMAGE_CAPTURE_SECURE";
public static final String ACTION_TRIM_VIDEO =
"com.android.camera.action.TRIM";
public static final String MEDIA_ITEM_PATH = "media-item-path";
……
private Intent mVideoShareIntent;
private Intent mImageShareIntent;
private AlertDialog mLocationDialog;
private BroadcastReceiver mBatteryInfoReceiver = new BroadcastReceiver() {
@Override
public void onReceive(Context context, Intent intent) {
String action = intent.getAction();
if (Intent.ACTION_BATTERY_CHANGED.equals(action)) {
int Level = intent.getIntExtra("level", 0);
int Scale = intent.getIntExtra("scale", 100);
Log.w(TAG, "2016/11/29 19:54 &&&& wenyuanbo battery Level" + Level);
/*
*Logic:
*1.the battery level is lower then 5%.
*2.if in camera, make sure that not in the snapshot progress.
*3.if in videocamera, make sure that not in the videorecording progress.
*4.everytime starting the camera activity, the battery level is broadcasted,
* if meeting the conditions above, give a dialog, press it and finish the activity.
*5.if the conditions are not satisfied when started, play for a moment, in the camera acitvity
* or video camera activity, the conditiosn are satisfied, also give a dialog for finishing the activity.
*
*by fuqiang.
*/
if(Level < 5)
{
Runnable runnable_close_camera = new Runnable() {
@Override
public void run() {
//close the camera.
// CameraActivity.this.finish();
}
};
Log.w(TAG, "2016/11/29 18:20 **** wenyuanbo battery Level" + Level);
showLocationDialog();
}
/*
*Logic:
*1.the battery level is lhigher then 5% and lower than 15%.
*2.if in camera, make sure that not in the snapshot progress.
*3.if in videocamera, make sure that not in the videorecording progress.
*4.whether in camera or in videocamera, make sure that the flash mode is supported.
*5.everytime starting the camera activity, the battery level is broadcasted,
* if meeting the conditions above, forbidden the flash(gray icon), give a dialog to notise user.
*6.if the conditions are not satisfied when started, play for a moment, in the camera acitvity
* or video camera activity, the conditiosn are satisfied, forbidden the flash and give a notice dialog.
*7.the dialog is only given once for each camera activity starting.
*
*by fuqiang.
*/
else if(Level < 16)
{
//close the flash mode.
/*
if (mIsLowBatteryDialogShown == false)
{
mRotateDialog.showAlertDialog(
getString(R.string.warning),
getString(R.string.low_battery_15),
null, null,
getString(R.string.close), null);
mIsLowBatteryDialogShown = true;
}
*/
}
}
}
};
……
}
8、HM1375的驱动程序请直接联系HiMax原厂或者代理商：
R:\wyb\hm1375_parrotv1.1\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\hm1375.c
R:\wyb\hm1375_parrotv1.1\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\Makefile
obj-m += ov5640.o
obj-m += hm1375.o
obj-m += hm5065.o
obj-m += ov2640.o
obj-m += ov7736.o
#obj-m += s5k4ec.o
#obj-m += s5k4ec_mipi.o
#obj-m += gc2035.o
#obj-m += gt2005.o
#obj-m += gc0307.o
obj-m += gc0308.o
#obj-m += gc0309.o
#obj-m += gc0328.o
#obj-m += gc0329.o
#obj-m += gc0311.o
#obj-m += hi253.o
#obj-m += sp2518.o
#obj-m += sp2519.o
#obj-m += sp0718.o
#obj-m += sp0838.o
#obj-m += ov16825.o
#obj-m += ov5650.o
#obj-m += ov5647.o
#obj-m += ov5647_mipi.o
#obj-m += t8et5.o
#obj-m += s5k4e1.o
#obj-m += s5k4e1_mipi.o
#obj-m += sp2518.o
#obj-m += sp0718.o
#obj-m += gc5004.o
#obj-m += gc5004_mipi.o
#obj-m += ov5648.o
#obj-m += ar0330.o
#obj-m += ov5648.o
#obj-m += sp5408.o
#obj-m += ov12830.o
#obj-m += ov8825.o
#obj-m += ov8850.o
#obj-m += gc2155.o
#obj-m += ov8858.o
#obj-m += ov13850.o
#obj-m += ov8858_4lane.o
9、hm1375项请参照ov2640填写：
R:\wyb\hm1375_parrotv1.1\lichee\linux-3.4\drivers\media\video\sunxi-vfe\sensor_info.c
struct sensor_item sensor_list_t[] =
{
// name i2c_addr sensor type sensor size sensor max pclk
//{ "gc2145" , 0x78, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M},
{ "hm1375" , 0x48, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M},
{ "hm5065" , 0x3e, SENSOR_YUV , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "ov2640" , 0x60, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M},
{ "ov5640" , 0x78, SENSOR_YUV , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "ov5647" , 0x6c, SENSOR_RAW , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "ov5647_mipi" , 0x6c, SENSOR_RAW , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "ov5650" , 0x50, SENSOR_RAW , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "ov5648" , 0x6c, SENSOR_RAW , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "ov8825" , 0x6c, SENSOR_RAW , PIXEL_NUM_8M , CORE_CLK_RATE_FOR_8M},
{ "ov8850" , 0x20, SENSOR_RAW , PIXEL_NUM_8M , CORE_CLK_RATE_FOR_8M},
{ "ov12830" , 0x6c, SENSOR_RAW , PIXEL_NUM_12M , CORE_CLK_RATE_FOR_16M},
{ "ov16825" , 0x6c, SENSOR_RAW , PIXEL_NUM_16M , CORE_CLK_RATE_FOR_16M},
{ "gc0329" , 0x62, SENSOR_YUV , PIXEL_NUM_0_3M , CORE_CLK_RATE_FOR_2M},
{ "gc0309" , 0x42, SENSOR_YUV , PIXEL_NUM_0_3M , CORE_CLK_RATE_FOR_2M},
{ "gc0307" , 0x42, SENSOR_YUV , PIXEL_NUM_0_3M , CORE_CLK_RATE_FOR_2M},
{ "gc0308" , 0x42, SENSOR_YUV , PIXEL_NUM_0_3M , CORE_CLK_RATE_FOR_2M},
{ "gc2035" , 0x78, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M},
{ "gt2005" , 0x78, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M},
{ "gc2015" , 0x60, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M},
{ "gc2235" , 0x78, SENSOR_RAW , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M},
{ "sp0838" , 0x30, SENSOR_YUV , PIXEL_NUM_0_3M , CORE_CLK_RATE_FOR_2M},
{ "sp0718" , 0x6c, SENSOR_YUV , PIXEL_NUM_0_3M , CORE_CLK_RATE_FOR_2M},
{ "sp2518" , 0x6c, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M},
{ "hi253" , 0x40, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M},
{ "hi257" , 0x40, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M},
{ "s5k4ec" , 0x5a, SENSOR_YUV , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "s5k4ec_mipi" , 0x5a, SENSOR_YUV , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "s5k4e1" , 0x20, SENSOR_RAW , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "s5k4e1_mipi" , 0x20, SENSOR_RAW , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "t4k05" , 0x6c, SENSOR_RAW , PIXEL_NUM_8M , CORE_CLK_RATE_FOR_8M},
{ "t8et5" , 0x78, SENSOR_RAW , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "ar0330" , 0x20, SENSOR_RAW , PIXEL_NUM_3M , CORE_CLK_RATE_FOR_3M},
{ "bf3a03" , 0xDC, SENSOR_YUV , PIXEL_NUM_0_3M , CORE_CLK_RATE_FOR_2M},
{ "gc0311" , 0x66, SENSOR_YUV , PIXEL_NUM_0_3M , CORE_CLK_RATE_FOR_2M},
{ "gc0311" , 0x66, SENSOR_YUV , PIXEL_NUM_0_3M , CORE_CLK_RATE_FOR_2M},
{ "gc5004" , 0x6c, SENSOR_RAW , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "gc5004_mipi" , 0x6c, SENSOR_RAW , PIXEL_NUM_5M , CORE_CLK_RATE_FOR_5M},
{ "nt99252" , 0x6c, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M},
{ "ov7736" , 0x42, SENSOR_YUV , PIXEL_NUM_0_3M , CORE_CLK_RATE_FOR_2M},
};
10、
R:\wyb\hm1375_parrotv1.1\lichee\tools\pack\chips\sun8iw5p1\configs\default\env.cfg
bootdelay=3
#default bootcmd, will change at runtime according to key press
bootcmd=run setargs_nand boot_normal#default nand boot
#kernel command arguments
console=ttyS0,115200
nand_root=/dev/nandd
mmc_root=/dev/mmcblk0p7
init=/init
loglevel=8
#set kernel cmdline if boot.img or recovery.img has no cmdline we will use this
setargs_nand=setenv bootargs console=${console} root=${nand_root} init=${init} ion_cma_512m=120m ion_cma_1g=176m ion_carveout_512m=96m ion_carveout_1g=150m coherent_pool=4m loglevel=${loglevel} partitions=${partitions}
setargs_mmc=setenv bootargs console=${console} root=${mmc_root} init=${init} ion_cma_512m=120m ion_cma_1g=176m ion_carveout_512m=96m ion_carveout_1g=150m coherent_pool=4m loglevel=${loglevel} partitions=${partitions}
#nand command syntax: sunxi_flash read address partition_name read_bytes
#0x40007800 = 0x40008000(kernel entry) - 0x800(boot.img header 2k)
boot_normal=sunxi_flash read 40007800 boot;boota 40007800
boot_recovery=sunxi_flash read 40007800 recovery;boota 40007800
boot_fastboot=fastboot
#recovery key
recovery_key_value_max=0x13
recovery_key_value_min=0x10
#fastboot key
fastboot_key_value_max=0x8
fastboot_key_value_min=0x2
11、
R:\wyb\hm1375_parrotv1.1\lichee\tools\pack\chips\sun8iw5p1\configs\evb-30\sys_config.fex
;----------------------------------------------------------------------------------
;dcdc1_vol ---set dcdc1 voltage,mV,1600-3400,100mV/step
;dcdc2_vol ---set dcdc2 voltage,mV,600-1540,20mV/step
;dcdc3_vol ---set dcdc3 voltage,mV,600-1860,20mV/step
;dcdc4_vol ---set dcdc4 voltage,mV,600-1540,20mV/step
;dcdc5_vol ---set dcdc5 voltage,mV,1000-2550,50mV/step
;aldo2_vol ---set aldo2 voltage,mV,700-3300,100mV/step
;aldo3_vol ---set aldo3 voltage,mV,700-3300,100mV/step
;----------------------------------------------------------------------------------
[power_sply]
dcdc1_vol = 3000
dcdc2_vol = 1100
dcdc3_vol = 1200
dcdc4_vol = 0
dcdc5_vol = 1500
aldo2_vol = 2500
aldo3_vol = 3000
dldo3_vol = 2800
;gpio0_vol = 2800
ldoio0_vol = 2800
;--------------------------------------------------------------------------------
;vip (video input port) configuration
;vip_used: 0:disable 1:enable
;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer
;vip_dev_qty: The quantity of devices linked to capture bus
;
;vip_define_sensor_list: If you want use sensor detect function, please set vip_define_sensor_list = 1, and
; verify that file /system/etc/hawkview/sensor_list_cfg.ini is properly configured!
;
;vip_dev(x)_pos: sensor position, "rear" or "front", if vip_define_sensor_list = 1,vip_dev(x)_pos must be configured!
;
;vip_dev(x)_isp_used 0:not use isp 1:use isp
;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb
;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby
;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable
;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable
;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply
;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply
;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply
;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply
;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply
;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply
;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply
;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply
;x indicates the index of the devices which are linked to the same capture bus
;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000
;fill handle string as below:
;axp22_eldo3
;axp22_dldo4
;axp22_eldo2
;fill handle string "" when not using any pmu power supply
;--------------------------------------------------------------------------------
[csi0]
vip_used = 1
vip_mode = 0
vip_dev_qty = 1
vip_define_sensor_list = 0
vip_csi_pck = port:PE00
vip_csi_mck = port:PE01
vip_csi_hsync = port:PE02
vip_csi_vsync = port:PE03
vip_csi_d0 = port:PE04
vip_csi_d1 = port:PE05
vip_csi_d2 = port:PE06
vip_csi_d3 = port:PE07
vip_csi_d4 = port:PE08
vip_csi_d5 = port:PE09
vip_csi_d6 = port:PE10
vip_csi_d7 = port:PE11
vip_csi_sck = port:PE12
vip_csi_sda = port:PE13
;vip_dev0_mname = "ov5640"
vip_dev0_mname = "hm1375"
;vip_dev0_mname = "hm5065"
vip_dev0_pos = "rear"
vip_dev0_lane = 1
vip_dev0_twi_id = 2
;vip_dev0_twi_addr = 0x78
vip_dev0_twi_addr = 0x48
;vip_dev0_twi_addr = 0x3e
vip_dev0_isp_used = 0
vip_dev0_fmt = 0
（在调试的时候请置0：）
vip_dev0_stby_mode = 0
vip_dev0_vflip = 0
vip_dev0_hflip = 0
;vip_dev0_iovdd = "axp22_dldo3"
vip_dev0_iovdd = ""
vip_dev0_iovdd_vol = 2800000
vip_dev0_avdd = "axp22_ldoio0"
vip_dev0_avdd_vol = 2800000
vip_dev0_dvdd = ""
vip_dev0_dvdd_vol = 1800000
vip_dev0_afvdd = ""
vip_dev0_afvdd_vol = 2800000
vip_dev0_power_en =
vip_dev0_reset = port:PE14
vip_dev0_pwdn = port:PE15
vip_dev0_flash_en =
vip_dev0_flash_mode =
vip_dev0_af_pwdn =
power_start = 3
924
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
