k8s上运行我们的springboot服务之——k8s 1.16.0安装

最新推荐文章于 2024-07-02 14:54:55 发布

weiranaixi

最新推荐文章于 2024-07-02 14:54:55 发布

阅读量1.2k

点赞数

分类专栏： k8s 文章标签： k8s docker centos flannel istio

本文链接：https://blog.csdn.net/weiranaixi/article/details/102909419

版权

k8s 专栏收录该内容

7 篇文章 0 订阅

订阅专栏

k8s上运行我们的springboot服务之——k8s 1.16.0安装

内容介绍

个人觉得有了k8s，我们管理和发布服务都很轻松。这里介绍k8s在centos下的安装，作为各种服务在k8s发布和管理的基础平台架构

技术版本

docker-ce-19.03.1-3.el7
centos7
k8s 1.16.0

服务器罗列

一台作为master，另外两台作为slave节点
192.168.1.181 k8s-master
192.168.1.182 k8s-slave1
192.168.1.183 k8s-slave2

一定要按步骤来，不然会出错

域名映射

在每台服务器上执行
#vi /etc/hosts
192.168.1.181 k8s-master
192.168.1.182 k8s-slave1
192.168.1.183 k8s-slave2

基础配置

全部主机配置、停防火墙、关闭Swap、关闭Selinux、设置内核、K8S的yum源、安装依赖包、配置ntp（配置完后建议重启一次）
禁用防火墙，安装iptables, 并安装ntp时间同步

关闭防火墙和selinux

#systemctl stop firewalld && systemctl disable firewalld
#sed -i ‘s/^SELINUX=enforcing$/SELINUX=disabled/’ /etc/selinux/config && setenforce 0

关闭swap

#swapoff -a
#yes | cp /etc/fstab /etc/fstab_bak
#cat /etc/fstab_bak |grep -v swap > /etc/fstab

时间同步

注意各个节点必须时间一致，同步，否则会报错

master节点

#安装chrony：
#yum install -y chrony
#注释默认ntp服务器
#sed -i ‘s/^server/#&/’ /etc/chrony.conf
#指定上游公共 ntp 服务器，并允许其他节点同步时间
#cat >> /etc/chrony.conf << EOF
server 0.asia.pool.ntp.org iburst
server 1.asia.pool.ntp.org iburst
server 2.asia.pool.ntp.org iburst
server 3.asia.pool.ntp.org iburst
allow all
EOF
#重启chronyd服务并设为开机启动：
systemctl enable chronyd && systemctl restart chronyd
#开启网络时间同步功能
timedatectl set-ntp true

slave节点

#安装chrony：
yum install -y chrony
#注释默认服务器
sed -i ‘s/^server/#&/’ /etc/chrony.conf
#指定内网 master节点为上游NTP服务器
echo server 192.168.1.181 iburst >> /etc/chrony.conf
#重启服务并设为开机启动：
systemctl enable chronyd && systemctl restart chronyd

安装docker

master、slave均需要执行
#配置docker yum源

#yum -y install yum-utils
#yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

#安装指定版本，这里安装19.03.1-3.el7，因为k8s1.16.0的要求
#yum list docker-ce --showduplicates | sort -r
#yum install -y docker-ce-19.03.1-3.el7
#systemctl start docker && systemctl enable docker
参数修改
vi /etc/docker/daemon.json
{
#The recommended driver is “systemd”
“exec-opts”: [“native.cgroupdriver=systemd”],
#https
“insecure-registries”: [“192.168.1.181:5000”]
}

#systemctl start docker && systemctl enable docker

修改内核参数

#vi /etc/sysctl.conf
net.ipv4.ip_forward=1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-arptables = 1
vm.swappiness=0

关闭swap
#swapoff -a

关闭selinux
#vi /etc/selinux/config
SELINUX=disabled
保存修改内核参数
#sysctl -p

安装kubelet kubeadm kubectl

master、slave均需要执行

#vi /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes Repo
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
enabled=1
#yum update
#yum install -y kubelet kubeadm kubectl
设置开机启动kubelet
systemctl start kubelet
systemctl enable kubelet.service
此时查看下面两个文件的值是否为1
#cat /proc/sys/net/bridge/bridge-nf-call-ip6tables
1
#cat /proc/sys/net/bridge/bridge-nf-call-ip6tables
1

master 执行

查看需要哪些镜像：
#kubeadm config images list

由于网络原因，我们使用脚本通过阿里巴巴的镜像源获得需要的docker镜像

#mkdir /home/spark/k8s
#cd /home/spark/k8s
#vi k8s.sh

#!/bin/bash

#使用如下脚本下载国内镜像，并修改tag为google的tag
set -e

KUBE_VERSION=v1.16.0
KUBE_PAUSE_VERSION=3.1
ETCD_VERSION=3.3.15-0
CORE_DNS_VERSION=1.6.2

GCR_URL=k8s.gcr.io
ALIYUN_URL=registry.cn-hangzhou.aliyuncs.com/google_containers

images=(kube-proxy:${KUBE_VERSION}
kube-scheduler:${KUBE_VERSION}
kube-controller-manager:${KUBE_VERSION}
kube-apiserver:${KUBE_VERSION}
pause:${KUBE_PAUSE_VERSION}
etcd:${ETCD_VERSION}
coredns:${CORE_DNS_VERSION})

for imageName in ${images[@]} ; do
  docker pull $ALIYUN_URL/$imageName
  docker tag  $ALIYUN_URL/$imageName $GCR_URL/$imageName
  docker rmi $ALIYUN_URL/$imageName
done

#执行下载镜像，可能要等一会，所以让子弹飞一会
#./k8s.sh
安装
#kubeadm init --kubernetes-version=v1.16.0 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=192.168.1.181
在这里插入图片描述

把这个token复制保存下来，后面添加slave节点需要使用，当然也可以不记下来，后面可以通过命令获得
kubeadm join 192.168.1.181:6443 --token syjco0.js9a67cyst38vwht
–discovery-token-ca-cert-hash sha256:4b5f2fc80cc09ef97eedb0042338dfc709d6a1b94163174ec31b95e02dffd21a
下面的命令就是拷贝上面截图中的三个命令
#mkdir -p $HOME/.kube
#sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
#sudo chown $(i d - u) :$ (id -g) $HOME/.kube/config

查看一下
#kubectl get pod -n kube-system -o wide
在这里插入图片描述
可以看到，CoreDNS依赖于网络的 Pod 都处于 Pending 状态，即调度失败。这当然是符合预期的：因为这个 Master 节点的网络尚未就绪

安装flannel网络

由于网络原因，还是通过脚本来pull镜像吧
#vi flanneld.sh

#!/bin/bash

set -e

FLANNEL_VERSION=v0.11.0

#在这里修改源
QUAY_URL=quay.io/coreos
QINIU_URL=quay-mirror.qiniu.com/coreos

images=(flannel: ${FLANNEL_VERSION}-amd64 flannel:$ {FLANNEL_VERSION}-arm64
flannel: ${FLANNEL_VERSION}-arm flannel:$ {FLANNEL_VERSION}-ppc64le
flannel:${FLANNEL_VERSION}-s390x)

for imageName in ${images[@]} ; do
docker pull $QINIU_URL/$ imageName
docker tag $QINIU_URL/$ imageName $QUAY_URL/$ imageName
docker rmi $QINIU_URL/$ imageName
done

#./flanneld.sh

#vi kube-flannel.yml

---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
  name: psp.flannel.unprivileged
  annotations:
    seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
    seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
    apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
    apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
  privileged: false
  volumes:
    - configMap
    - secret
    - emptyDir
    - hostPath
  allowedHostPaths:
    - pathPrefix: "/etc/cni/net.d"
    - pathPrefix: "/etc/kube-flannel"
    - pathPrefix: "/run/flannel"
  readOnlyRootFilesystem: false
  # Users and groups
  runAsUser:
    rule: RunAsAny
  supplementalGroups:
    rule: RunAsAny
  fsGroup:
    rule: RunAsAny
  # Privilege Escalation
  allowPrivilegeEscalation: false
  defaultAllowPrivilegeEscalation: false
  # Capabilities
  allowedCapabilities: ['NET_ADMIN']
  defaultAddCapabilities: []
  requiredDropCapabilities: []
  # Host namespaces
  hostPID: false
  hostIPC: false
  hostNetwork: true
  hostPorts:
  - min: 0
    max: 65535
  # SELinux
  seLinux:
    # SELinux is unsed in CaaSP
    rule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
rules:
  - apiGroups: ['extensions']
    resources: ['podsecuritypolicies']
    verbs: ['use']
    resourceNames: ['psp.flannel.unprivileged']
  - apiGroups:
      - ""
    resources:
      - pods
    verbs:
      - get
  - apiGroups:
      - ""
    resources:
      - nodes
    verbs:
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - nodes/status
    verbs:
      - patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: flannel
  namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-system
  labels:
    tier: node
    app: flannel
data:
  cni-conf.json: |
    {
      "name": "cbr0",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "flannel",
          "delegate": {
            "hairpinMode": true,
            "isDefaultGateway": true
          }
        },
        {
          "type": "portmap",
          "capabilities": {
            "portMappings": true
          }
        }
      ]
    }
  net-conf.json: |
    {
      "Network": "10.244.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-amd64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - amd64
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-amd64
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-amd64
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - arm64
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-arm64
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-arm64
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - arm
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-arm
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-arm
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-ppc64le
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - ppc64le
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-ppc64le
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-ppc64le
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-s390x
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
              - matchExpressions:
                  - key: beta.kubernetes.io/os
                    operator: In
                    values:
                      - linux
                  - key: beta.kubernetes.io/arch
                    operator: In
                    values:
                      - s390x
      hostNetwork: true
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-s390x
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-s390x
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
             add: ["NET_ADMIN"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run/flannel
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg

#kubectl apply -f kube-flannel.yml

至此，Kubernetes 的 Master 节点就部署完成了。如果你只需要一个单节点的 Kubernetes，现在你就可以使用了。不过，在默认情况下，Kubernetes 的 Master 节点是不能运行用户 Pod 的

如果安装失败，需要重装时。可以使用如下命令来清理环境
#重置kubeadm
kubeadm reset
#重置iptables
iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X

slave节点

vi k8s-slave.sh

#!/bin/bash

##使用如下脚本下载国内镜像，并修改tag为google的tag
set -e

KUBE_VERSION=v1.16.0
KUBE_PAUSE_VERSION=3.1
CORE_DNS_VERSION=1.6.2

GCR_URL=k8s.gcr.io
ALIYUN_URL=registry.cn-hangzhou.aliyuncs.com/google_containers

images=(kube-proxy:${KUBE_VERSION}
pause:${KUBE_PAUSE_VERSION}
coredns:${CORE_DNS_VERSION})

for imageName in ${images[@]} ; do
  docker pull $ALIYUN_URL/$imageName
  docker tag  $ALIYUN_URL/$imageName $GCR_URL/$imageName
  docker rmi $ALIYUN_URL/$imageName
done

#./k8s-slave.sh

#yum install -y kubelet kubeadm kubectl

#systemctl start kubelet

#systemctl enable kubelet

#systemctl status kubelet

在master执行命令查看slave几点加入集群的命令
#kubeadm token create --print-join-command
kubeadm join 192.168.1.181:6443 --token wowvwv.0drdeh4f6n97e10h
–discovery-token-ca-cert-hash sha256:c9b2808367a08b846af8774bfd70ef12588c0598374c622fdedda46232eb5780
拷贝上面的命令在各个slave节点执行
#kubeadm join 192.168.1.181:6443 --token wowvwv.0drdeh4f6n97e10h
–discovery-token-ca-cert-hash sha256:c9b2808367a08b846af8774bfd70ef12588c0598374c622fdedda46232eb5780

排错
#journalctl -xefu kubelet
如果安装失败，需要重装时。可以使用如下命令来清理环境
#重置kubeadm
kubeadm reset
#重置iptables
iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X

错误处理：
cni.go:259] Error adding network: failed to set bridge addr: “cni0” already has an IP address different from 10.16.2.1/24

#kubeadm reset
#systemctl stop kubelet
#systemctl stop docker
#rm -rf /var/lib/cni/
#rm -rf /var/lib/kubelet/*
#rm -rf /etc/cni/
#ifconfig cni0 down
#ifconfig flannel.1 down
#ifconfig docker0 down
#ip link delete cni0
#ip link delete flannel.1
#systemctl start docker

错误解决
关于错误cni config uninitialized Addresses,有可能是node拉取flannel镜像报错，可以配置好了docker私服再试

查看集群情况

让子弹飞一会

slave执行
#kubectl -s http://k8s-master:8080 get node
NAME STATUS AGE
k8s-node-1 Ready 3m
k8s-node-2 Ready 16s
master执行
#kubectl get nodes
NAME STATUS AGE
k8s-node-1 Ready 3m
k8s-node-2 Ready 43s

#kubectl get pod --all-namespaces -o wide
至此，已经搭建了一个kubernetes集群。

#kubectl describe pod kube-controller-manager-k8s-master --namespace=kube-system

出于安全考虑，默认配置下Kubernetes不会将Pod调度到Master节点。查看Taints字段默认配置：
#kubectl describe node k8s-master

如果希望将k8s-master也当作Node节点使用，可以执行如下命令,其中k8s-master是主机节点hostname：

#kubectl taint node k8s-master node-role.kubernetes.io/master-

修改后Taints字段状态：

#kubectl describe node k8s-master

如果要恢复Master Only状态，执行如下命令：

kubectl taint node k8s-master node-role.kubernetes.io/master=:NoSchedule

kube-proxy开启ipvs

在所有的Kubernetes节点slave1和slave2上执行以下脚本:
cat > /etc/sysconfig/modules/ipvs.modules <<EOF
#!/bin/bash
modprobe – ip_vs
modprobe – ip_vs_rr
modprobe – ip_vs_wrr
modprobe – ip_vs_sh
modprobe – nf_conntrack_ipv4
EOF
chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack_ipv4
脚本创建了的/etc/sysconfig/modules/ipvs.modules文件，保证在节点重启后能自动加载所需模块。使用lsmod | grep -e ip_vs -e nf_conntrack_ipv4命令查看是否已经正确加载所需的内核模块。
在所有节点上安装ipset软件包
yum install ipset -y
为了方便查看ipvs规则我们要安装ipvsadm(可选)
yum install ipvsadm -y

修改ConfigMap的kube-system/kube-proxy中的config.conf，mode: “ipvs”
#kubectl edit cm kube-proxy -n kube-system
之后重启各个节点上的kube-proxy pod：
#kubectl get pod -n kube-system | grep kube-proxy | awk ‘{system(“kubectl delete pod “$1” -n kube-system”)}’
#kubectl get pod -n kube-system | grep kube-proxy

查看日志：
#kubectl logs kube-proxy-6qlgv -n kube-system
日志中打印出了Using ipvs Proxier，说明ipvs模式已经开启。

移除节点和集群

kubernetes集群移除节点
以移除k8s-node2节点为例，在Master节点上运行：
kubectl drain k8s-node2 --delete-local-data --force --ignore-daemonsets

上面两条命令执行完成后，在k8s-slave2节点执行清理命令，重置kubeadm的安装状态：
kubeadm reset
在master上删除node并不会清理k8s-slave2运行的容器，需要在删除节点上面手动运行清理命令。
如果你想重新配置集群，使用新的参数重新运行kubeadm init或者kubeadm join即可。

至此3个节点的集群搭建完成，后续可以继续添加slave节点，或者部署Prometheus、alertmanager等组件（这些可以结合istio完成）。也可以部署flink，springboot服务等

禁止master部署pod
kubectl taint nodes k8s-master node-role.kubernetes.io/master=true:NoSchedule

以上说的均可以参考link