Bringing up interface eth0: Error: No suitable device found: no device found for connection 'System

[root@mytestdb rules.d]# service network restart
Shutting down loopback interface:                          [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface Auto_eth3:  Active connection state: activated
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/4
                                                           [  OK  ]
Bringing up interface eth0:  Error: No suitable device found: no device found for connection 'System eth0'.
                                                           [FAILED]
Bringing up interface eth1:  Error: No suitable device found: no device found for connection 'System eth1'.
                                                           [FAILED]
Bringing up interface eth2:  Error: No suitable device found: no device found for connection 'System eth2'.

                                                           [FAILED]

[root@mytestdb rules.d]# cat  70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.


# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:3a:50:b3", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"


# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:3e:ad:93", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"


# PCI device 0x8086:0x100f (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:2b:a7:77", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

将硬件的所有mac 地址改成一致就行了