单片机汉字点阵c语言程序,51单片机,点阵显示汉字(C语言)

#include

#include

#define uint unsigned int

#define uchar unsigned char

sbit SH_595=P2^1;

sbit DATA_595=P2^0;

sbit ST_CP_595=P2^2;//74HC595(12)-ST_CP上升沿-移位寄存器的数据进入数据存储寄存器 输出锁存器的时钟信号端口

sbit MR_595=P2^3; //74HC595(10)-MR 为0将移位寄存器的数据清0

sbit E1_154=P2^4;//74HC154(18)-E1为0开列(col)输出 显示允许   控制信号端口

uchar keynum;

uchar tempbmp[64];

uint base=0;  //在bmp地址中移动，从0 到 rows - 15,每次加2，实现移动效果

uint tmp=0;

uint col=0;

unsigned char code bmp1[]={    //字模表

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x08,0x00,0x08,0x1F,0xC8,0x92,0x48,0x52,0x48,0x32,0x48,0x12,0x48,0x1F,0xFF,

0x12,0x48,0x32,0x48,0x52,0x48,0x92,0x48,0x1F,0xC8,0x00,0x08,0x00,0x08,0