标准化管理处编码[BBX968T-XBB8968-NNJ668-MM9N]
标准化管理处编码[BBX968T-XBB8968-NNJ668-MM9N]
UPS检测报告单
Three Phase Input/Three Phase Output 10/30KVA UPS Shipment Accessories
NO
P/N
Description
Qty
Unit
Operator
Qc
Remark
1
TD33 UPS System User Manual
1
EA
2
UPS Warranty
1
EA
3
UPS Installation Report
1
EA
4
Terminal Embedded Software,Monitoring Software And Disk
1
EA
5
System Test Report
1
EA
6
RS232 Connecting Wire
1
EA
三进三出10/30KVA UPS发货附件清单
序号
项目编码
项目描述
数量
单位
点料员
检验员
备注
1
TD33系列UPS系统用户手册
1
EA
2
UPS电源保修单
1
EA
3
UPS设备安装报告
1
EA
4
终端物理元件-监控软件单机版和光盘
1
EA
5
系统测试报告
1
EA
6
RS232连接线
1
EA
UPS检测报告单 UPS INSPECTION REPORT
对外型号
Model
系统条码
System serial number
UPS系列:
UPS Serial:
类别
Category
代码
Code
检验项目
Inspection Item
检验标准
Inspection standard
检测结果
Inspect result
A外观
Appearance
A1
表面、丝印、标识
Surface,Screen Printing,Marking
无明显凹痕、划伤、裂隙、变形、脏污、色差。标识内容和位置正确,无缺划。
No evident dent、destruct、cranny、distortion、dirty、chromatic aberration,Correct Content and Location,No Lack strokes of font.
□ OK
□ NG
A2
结构件
Mechanical component
各结构件外观良好,连接良好,各活动门开关正常
Finish and cosmetic meet corporation standard,mechanical components comply with the drawing and are well connected,hinge are flexible
□ OK
□ NG
A3
器件和开关功能
Electrical part and switch function test
型号正确、安装紧固到位,开关功能检测正常
Correct model,tightly mounted,switches function meet test Spec.
□ OK
□ NG
A4
配线工艺
Wiring and binding
各连接电缆连接紧固,走线符合工艺要求
All cables are well fastened and meet craftsmanship requirement
□ OK
□ NG
B电气性能测试
Electrical
Performance
B1
绝缘电阻
Insulation Resistance
输入端、输出端对地施加500V直流电压,绝缘电阻≥2MΩ
Input and output to ground R≥2MΩ with 500Vdc
□ OK
□ NG
B2
接地电阻
Earth Resistance
系统内等电位金属结构件与接地排之间的电阻<0.1Ω
Resistance between Mechanical component and ground bus-bar<0.1Ω
□ OK
□ NG
B3
绝缘强度
Dielectric Strength
漏电流≤1mA(2820Vdc,1min,无击穿或飞弧)
Leakage current≤1mA(2820Vdc,1min without arc or breakdown)
□ OK
□ NG
B4
对地漏电流
Earth leakage current
正常工作时≤3.5mA,若机箱上贴有告警标签,则不超过输入电流的5%
Normal work≤3.5mA,If there is al