烟雾传感器的matlab程序,单片机烟雾传感器报警实验程序

#include

#define  buf_len 9

unsigned char temp[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71};

unsigned char write_buf[buf_len] = {0xff,0x01,0x86,0x00,0x00,0x00,0x00,0x00,0x79};

char read_buf[buf_len] = {0};

unsigned char uart_len = 0;

unsigned char uart_RX_num = 0;

void delay_ms(int ntime)

{

int i;

while(ntime--)

for(i = 0; i<120; i++);

}

void uart_init(void)

{

TMOD=0x20;                 //用来定时器设置

TH1=0xfd;                 //设置初值 9600=(2的SMOD次方/32)*(TI溢出率)=(1/32)*(11059200/12)/(256-X)

TL1=0xfd;

TR1=1;                         //开启定时器1

SM0=0;                         //设置串行口工作方式

SM1=1;

REN=1;                 //允许串行接收位

EA=1;