zyduino 单片机_【求教】那位牛人能把arduino程序翻译成51单片机程序

该楼层疑似违规已被系统折叠 隐藏此楼查看此楼

//Jeremy Blum's Arduino Tutorial Series - Episode 14 - Lights and Sound Holiday Special

//Sample Code 2 - Driving all 50 LEDs using an array powered by both stereo channels

//http://www.jeremyblum.com

//WS2801 Library and Helper Functions by Adafruit http://www.adafruit.com

/*

The circuit:

* A0 from Amplififed Left Channel

* A1 from Amplified Right Channel

* Digital 2 to Light Clock Line

* Digital 3 to Light Data Line

* Don't forget to connect all your grounds!

*/

//SPI Library

#include "SPI.h"

//RGB LED Library

//You can download it here: https://github.com/adafruit/Adafruit-WS2801-Library/archive/master.zip

//Install it in your library folder and restart the Arduino IDE

#include "Adafruit_WS2801.h"

//Analog Input Pins

int left_channel = 0;

int right_channel = 1;

//Light Control Pins

int light_data = 3;

int light_clk = 2;

//Set Strip Constants

const int length = 50;

const int half = length/2;

//Library Setup

Adafruit_WS2801 strip = Adafruit_WS2801(length, light_data, light_clk);

//Set up arrays for cycling through all the pixels. I'm assuming you have an even number of lights.

uint32_t left_array[half];

uint32_t right_array[half];

void setup()

{

//Fill pixel arrays with zeros

for(int i=0; i

{

left_array[i] = 0;

right_array[i] = 0;

}

//Initialize Strip

strip.begin();

strip.show();

}

void loop()

{

//Set the hue (0-255) and 24-bit color depending on left channel value

byte hue_left = constrain(map(analogRead(left_channel), 0, 400, 0, 255), 0, 255);

uint32_t color_left = Wheel(hue_left);

//Set the hue (0-255) and 24-bit color depending on right channel value

byte hue_right = constrain(map(analogRead(right_channel), 0, 400, 0, 255), 0, 255);

uint32_t color_right = Wheel(hue_right);

//Shift the current values.

for (int i = 0; i

{

left_array[i] = left_array[i+1];

right_array[i] = right_array[i+1];

}

//Fill in the new value at the end of each array

left_array[half-1] = color_left;

right_array[half-1] = color_right;

//Go through each Pixel on the strip and set its color

for (int i=0; i

{

//set pixel color

strip.setPixelColor(i, left_array[i]);

strip.setPixelColor(length-i-1, right_array[i]);

}

//Display the new values

strip.show();

//sample delay

delay(40);

}

/* Helper functions */

//http://www.ladyada.net/products/rgbledpixel/

// Create a 24 bit color value from R,G,B

uint32_t Color(byte r, byte g, byte b)

{

uint32_t c;

c = r;

c <<= 8;

c |= g;

c <<= 8;

c |= b;

return c;

}

//Input a value 0 to 255 to get a color value.

//The colours are a transition r - g -b - back to r

uint32_t Wheel(byte WheelPos)

{

if (WheelPos < 85) {

return Color(WheelPos * 3, 255 - WheelPos * 3, 0);

} else if (WheelPos < 170) {

WheelPos -= 85;

return Color(255 - WheelPos * 3, 0, WheelPos * 3);

} else {

WheelPos -= 170;

return Color(0, WheelPos * 3, 255 - WheelPos * 3);

}

}