M0 A无线服务器,基于新唐M0的M0516LAN的SIM900A的驱动测试

int SIM900A_gets(char *buf)

{

int ret=0;

int dly=3000000;// delay 3S

while(dly-->1)

{

if(UART1->FSR.RX_EMPTY == 0 )

{

*buf++ =UART1->DATA;//printf("%c",*(buf-1));

ret++;dly=10000;//delay 10ms

}

DrvSYS_Delay(1); //delay 1us

}

return ret;

}

void SIM900A_puts(const char *buf)

{

while(*buf)

{

while(UART1->FSR.TX_FULL == 1);

UART1->DATA =(*buf++)&0xff;//printf("%c",*(buf-1));

}

}

// AT+CPOWD=1 //Power down

// AT+CFUN=x //Power Saving

// AT+CBC//monitor the supply voltage

// AT+IPR=x//fixed baud rate ,“RDY” is received

// AT+CSCLK=1//enable the SLEEP mode

// AT+CMIC//adjust the input gain level of microphone

// AT+SIDET//set the side-tone level

// AT+CLVL//adjust the output gain level

// AT+CADC//read the voltage value on ADC

void SIM900A_test(void)

{

char buffer[128];

printf("");

printf("*** 9G-M0516 V1.00 Build byyuanxihua@21cn.comon ("__DATE__ " - " __TIME__ ")");

printf("*** 9G-M0516 V1.00 Rebooting ...");

SIM900A_init();

printf("SIM900A_test Send AT COMMAND @ 9600 bps !!!");

//SIM900A_puts("ATI");

SIM900A_puts("AT+GMM");

if(SIM900A_gets(buffer)>0)

{printf("%s",buffer);}

}

//源码完毕。－－缥缈九哥调试通过。

半主机的调试信息如下：

*** 9G-M0516 V1.00 Build byyuanxihua@21cn.comon (Jan 3 2012 - 13:16:32)

*** 9G-M0516 V1.00 Rebooting ...

SIM900A Open Success!!!

SIM900A_test Send AT COMMAND @ 9600 bps !!!

AT+GMM

SIMCOM_SIM900A

OK