qpsk的matlab和simulink仿真
摘 要
摘要
本论文主要包括两方面内容,第一个为使用 MATLAB 中M 语言完成 QPSK
的蒙特卡罗仿真,得出在加性高斯白噪声的信道下,传输比特错误率以及符号错
误率。并将比特错误率与理论值相比较,并得出关系曲线。
第二个内容为学习使用simulink ,了解simulink 中各种模块功能即原理,并使
用 simulink 搭建在加性高斯白噪声信道下的 QPSK 调制解调系统,其中解调器使
用相关器接收机。并计算传输序列的比特错误率。通过多次运行仿真得到比特错
误率与信噪比之间的关系。
关键词: QPSK,MATlAB ,simulink,仿真
I
ABSTRACT
ABSTRACT
The thesis includes two aspects, the first one is to use the MATLAB language to
complete Monte Carlo simulation of QPSK, and to obtain the transmission sequence bit
error rate and symbol error rate in the additive white Gaussian noise channel, comparing
it with the theoretical value, then get curve.
The second aspect is to learn how to use Simulink and the functions and principles
of various modules. Then we use Simulink to create the model of QPSK through
additive white Gaussian noise channel. And take the advantage of the Correlator receiver
to complete the operation of demodulation. Then calculate the transmission sequence bit error
rate. By running the simulation repeatedly, we can get the relationship between the bit
error rate and SNR.
Keywords : QPSK,MATlAB ,simulink,simulation
II
目 录
目录
第1 章 引言 1
1.1 QPSK 系统简介 1
1.2 本论文的选题意义 1
1.3 本论文的主要内容和任务 2
1.3.1 课题研究内容 2
1.3.1 论文需完成任务 2
1.4 本论文的结构 2
第2 章 基带数字传输 3
2.1 二进制信号传输 3
2.1.1 AWGN 下的最佳接收机 3
信号性关器 3
2.1.2 双极性矩形波的最佳接收机 4
2.2 多维信号传输 6
2.2.1 多维正交信号 6
2.2.2 多进制信号在AWGN 下的最佳接收机 7
信号相关器 7
检测器 8
第3 章 载波调制的数字传输 10
3.1 概述