python串口发送多字节数据_Python如何进行多串口通信？一个串口控制电机 一个串口采集数据？...

下载 pyserial包

def OpenCom(self,*args): #设置端口和波特率 selComPort =‘com2’ #波特率 selBaudRate =9600 #奇偶校验 selParity = 'N' try: if(not self.mySerial): self.mySerial = serial.Serial(port=selComPort, baudrate=selBaudRate,bytesize=8,parity=selParity,stopbits=1,timeout=5) else: if(self.mySerial.isOpen()): self.mySerial.close() self.mySerial = serial.Serial(port=selComPort, baudrate=selBaudRate, bytesize=8, parity=selParity, stopbits=1, timeout=5) self.lblInfo['text'] = '打开成功！' except Exception as ex: self.lblInfo['text'] = '打开失败！'

#使用com口发送modbus协议给终端设备。

def btnEmId_Click(self):

barray = bytearray([0x05, 0x03, 0xA#, 0x54, 0x00, 0x08])

vOldEmId = self.txbOldEmId.get()

vNewEmId = self.txbNewEmId.get()

barray[0] = int(vOldEmId)

barray[5] = int(vNewEmId)

#crc校验

strInput = utils.crc16_append(barray)

print(barray)

n = self.mySerial.write(barray)

if(n > 0):

str = self.mySerial.readall()

self.lblInfo['text'] = 'success！'

# for s in str:

# print (hex(s))

else:

self.lblInfo['text'] = 'error！'

温馨提示：答案为网友推荐，仅供参考