# cat /etc/multipath.conf
# This is a basic configuration file with some examples, for
device mapper
# multipath.
# For a complete list of the default configuration values,
see
#
/usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf.defaults
# For a list of configuration options with descriptions,
see
#
/usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf.annotated
#
# REMEMBER: After updating multipath.conf, you must run
#
# service multipathd reload
#
# for the changes to take effect in multipathd
## By default, devices with vendor = "IBM" and product =
"S/390.*" are
## blacklisted. To enable mulitpathing on these devies,
uncomment the
## following lines.
#blacklist_exceptions {
# device {
# vendor "IBM"
# product "S/390.*"
# }
#}
## Use user friendly names, instead of using WWIDs as
names.
defaults {
user_friendly_names yes
path_grouping_policy multibus #默认路径组策略
failback immediate
#失效处理方式,当前为立即
no_path_retry fail
}
##
## Here is an example of how to configure some standard
options.
##
#
#defaults {
# udev_dir /dev
# polling_interval 10
# selector "round-robin 0"
# path_grouping_policy multibus
# getuid_callout "/lib/udev/scsi_id --whitelisted
--device=/dev/%n"
# prio alua
# path_checker readsector0
# rr_min_io 100
# max_fds 8192
# rr_weight priorities
# failback immediate
# no_path_retry fail
# user_friendly_names yes
#}
##
## The wwid line in the following blacklist section is shown
as an example
## of how to blacklist devices by wwid. The
2 devnode lines are the
## compiled in default blacklist. If you want to blacklist
entire types
## of devices, such as all scsi devices, you should use a
devnode line.
## However, if you want to blacklist specific devices, you
should use
## a wwid line. Since there is no guarantee
that a specific device will
## not change names on reboot (from /dev/sda to /dev/sdb for
example)
## devnode lines are not recommended for blacklisting specific
devices.
##
blacklist {
# wwid 360a98000443139694f2b33616a416a4e
devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
devnode "^hd[a-z]"
}
multipaths {
multipath {
wwid 360a98000443139694f2b33616a416a4e
alias fc-dm0 #多路径映射设备的名字,自定义
path_grouping_policy multibus
path_checker tur #决定路径状态的方式
path_selector "round-robin 0" #选择路径I/O切换操作的方式
# failback manual
# rr_weight priorities
# no_path_retry 5
}
# multipath {
# wwid 1DEC_____321816758474
# alias red
# }
#}
devices {
device {
vendor "IBM"
product "N6240"
path_grouping_policy multibus
getuid_callout "/lib/udev/scsi_id --whitelisted
--device=/dev/%n" #获取唯一设备号
path_checker readsector0
path_selector "round-robin 0"
# hardware_handler "0"
failback immediate
# rr_weight priorities
# no_path_retry queue
}
# device {
# vendor "COMPAQ "
# product "MSA1000 "
# path_grouping_policy multibus
# }
}