linux系统修复磁盘映射,Multipath映射的磁盘的问题，谢谢！

Multipath映射的磁盘的问题，谢谢！

发布时间:2011-10-26 14:28:50来源:红联作者:dengbao2001

[i=s] 本帖最后由 dengbao2001 于 2011-10-26 15:08 编辑 [/i]

我有一个Compellent存储，给一台RHEL5.5的服务器划算了2个卷，通过编辑Multipath.conf文件，两个卷分别被识别了。但是我需要正常将两个卷从RHEL5.5中卸载，我执行了如下操作

屏蔽了Multipath.conf中的Multipath的两个卷的配置的映射，参考下面完整的Multipath.conf文件

# This is a basic configuration file with some examples, for device mapper

# multipath.

# For a complete list of the default configuration values, see

# /usr/share/doc/device-mapper-multipath-0.4.7/multipath.conf.defaults

# For a list of configuration options with descriptions, see

# /usr/share/doc/device-mapper-multipath-0.4.7/multipath.conf.annotated

# Blacklist all devices by default. Remove this to enable multipathing

# on the default devices.

#blacklist {

# devnode "*"

#}

## By default, devices with vendor = "IBM" and product = "S/390.*" are

## blacklisted. To enable mulitpathing on these devies, uncomment the

## following lines.

#blacklist_exceptions {

# device {

# vendor "IBM"

# product "S/390.*"

# }

#}

## Use user friendly names, instead of using WWIDs as names.

defaults {

user_friendly_names yes

}

##

## Here is an example of how to configure some standard options.

##

#

#defaults {

# udev_dir /dev

# polling_interval 10

# selector "round-robin 0"

# path_grouping_policy multibus

# getuid_callout "/sbin/scsi_id -g -u -s /block/%n"

# prio_callout /bin/true

# path_checker readsector0

# rr_min_io 100

# max_fds 8192

# rr_weight priorities

# failback immediate

# no_path_retry fail

# user_friendly_names yes

#}

##

## The wwid line in the following blacklist section is shown as an example

## of how to blacklist devices by wwid. The 2 devnode lines are the

## compiled in default blacklist. If you want to blacklist entire types

## of devices, such as all scsi devices, you should use a devnode line.

## However, if you want to blacklist specific devices, you should use

## a wwid line. Since there is no guarantee that a specific device will

## not change names on reboot (from /dev/sda to /dev/sdb for example)

## devnode lines are not recommended for blacklisting specific devices.

##

blacklist {

wwid 26353900f02796769

devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"

devnode "^hd[a-z]"

}

#multipaths {

# multipath {

# wwid 36000d3100032dd000000000000000005

# alias test02

# path_grouping_policy multibus

# path_checker readsector0

# path_selector "round-robin 0"

# failback manual

# rr_weight priorities

# no_path_retry 5

# }

#multipath {

# wwid 36000d3100032dd000000000000000003

# alias quorum

# path_grouping_policy multibus

# path_checker readsector0

# path_selector "round-robin 0"

# failback manual

# rr_weight priorities

# no_path_retry 5

# }

# multipath {

# wwid 1DEC_____321816758474

# alias red

# }

}

#devices {

# device {

# vendor "COMPAQ "

# product "HSV110 (C)COMPAQ"

# path_grouping_policy multibus

# getuid_callout "/sbin/scsi_id -g -u -s /block/%n"

# path_checker readsector0

# path_selector "round-robin 0"

# hardware_handler "0"

# failback 15

# rr_weight priorities

# no_path_retry queue

# }

# device {

# vendor "COMPAQ "

# product "MSA1000 "

# path_grouping_policy multibus

# }

#}

保存文件

multipath -F

Service multipathd restart

执行 ls - /dev/mapper 仍然可以看到映射的卷。

另外一个怪问题，两个卷我分别取了别名，参考配置文件，但是在/dev/mapper下面 显示却如(Mpath1,mpath2)

total 0

crw------- 1 root root 10, 63 Oct 26 19:54 control

brw-rw---- 1 root disk 253, 6 Oct 26 20:09 mpath1

brw-rw---- 1 root disk 253, 7 Oct 26 20:09 mpath2

请帮忙看看，谢谢！