linux ssd io错误,早上开机忽然显示i/o错误，是不是咱硬盘快挂了……

直接装了smartmontools,看不懂，各位大神给瞅瞅，看还有救不。

smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.17.6-1-ARCH] (local build)

Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===

Model Family: Seagate Barracuda 7200.14 (AF)

Device Model: ST2000DM001-1CH164

Serial Number: W241G8SJ

LU WWN Device Id: 5 000c50 05e5a996e

Firmware Version: CC26

User Capacity: 2,000,397,852,160 bytes [2.00 TB]

Sector Sizes: 512 bytes logical, 4096 bytes physical

Rotation Rate: 7200 rpm

Form Factor: 3.5 inches

Device is: In smartctl database [for details use: -P show]

ATA Version is: ATA8-ACS T13/1699-D revision 4

SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)

Local Time is: Fri Dec 19 12:13:56 2014 CST

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

See vendor-specific Attribute list for marginal Attributes.

General SMART Values:

Offline data collection status: (0x00)Offline data collection activity

was never started.

Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0)The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: ( 617) seconds.

Offline data collection

capabilities: (0x73) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

No Offline surface scan supported.

Self-test supported.

Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003)Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01)Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 1) minutes.

Extended self-test routine

recommended polling time: ( 266) minutes.

Conveyance self-test routine

recommended polling time: ( 2) minutes.

SCT capabilities: (0x3085)SCT Status supported.

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 110 099 006 Pre-fail Always - 203806219

3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0

4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1035

5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0

7 Seek_Error_Rate 0x000f 064 055 030 Pre-fail Always - 305139813253

9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9052

10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0

12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1264

183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0

184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1

187 Reported_Uncorrect 0x0032 049 049 000 Old_age Always - 51

188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 11

189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0

190 Airflow_Temperature_Cel 0x0022 075 053 045 Old_age Always - 25 (Min/Max 9/25)

191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0

192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 140

193 Load_Cycle_Count 0x0032 082 082 000 Old_age Always - 37579

194 Temperature_Celsius 0x0022 025 047 000 Old_age Always - 25 (0 5 0 0 0)

197 Current_Pending_Sector 0x0012 098 098 000 Old_age Always - 480

198 Offline_Uncorrectable 0x0010 098 098 000 Old_age Offline - 480

199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 8

240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 9557h+27m+57.955s

241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 19456326368

242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 29062687883

SMART Error Log Version: 1

ATA Error Count: 92 (device log contains only the most recent five errors)

CR = Command Register [HEX]

FR = Features Register [HEX]

SC = Sector Count Register [HEX]

SN = Sector Number Register [HEX]

CL = Cylinder Low Register [HEX]

CH = Cylinder High Register [HEX]

DH = Device/Head Register [HEX]

DC = Device Command Register [HEX]

ER = Error register [HEX]

ST = Status register [HEX]

Powered_Up_Time is measured from power on, and printed as

DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,

SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 92 occurred at disk power-on lifetime: 9051 hours (377 days + 3 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 80 58 aa 00 Error: WP at LBA = 0x00aa5880 = 11163776

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

61 00 38 28 71 e2 41 00 03:41:46.508 WRITE FPDMA QUEUED

60 00 f8 80 58 aa 40 00 03:41:46.508 READ FPDMA QUEUED

60 00 08 78 59 aa 40 00 03:41:46.508 READ FPDMA QUEUED

61 00 40 20 6b 4c 45 00 03:41:46.508 WRITE FPDMA QUEUED

ef 10 02 00 00 00 a0 00 03:41:46.508 SET FEATURES [Enable SATA feature]

Error 91 occurred at disk power-on lifetime: 9051 hours (377 days + 3 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 80 58 aa 00 Error: WP at LBA = 0x00aa5880 = 11163776

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

61 00 38 28 71 e2 41 00 03:41:46.508 WRITE FPDMA QUEUED

60 00 f8 80 58 aa 40 00 03:41:46.508 READ FPDMA QUEUED

60 00 08 78 59 aa 40 00 03:41:46.508 READ FPDMA QUEUED

61 00 40 20 6b 4c 45 00 03:41:46.508 WRITE FPDMA QUEUED

ef 10 02 00 00 00 a0 00 03:41:46.508 SET FEATURES [Enable SATA feature]

Error 90 occurred at disk power-on lifetime: 9051 hours (377 days + 3 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 20 58 aa 00 Error: WP at LBA = 0x00aa5820 = 11163680

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

61 00 38 28 71 e2 41 00 03:41:45.574 WRITE FPDMA QUEUED

61 00 40 20 6b 4c 45 00 03:41:45.574 WRITE FPDMA QUEUED

60 00 08 78 59 aa 40 00 03:41:43.450 READ FPDMA QUEUED

60 00 f8 80 58 aa 40 00 03:41:43.450 READ FPDMA QUEUED

60 00 08 20 0a 09 40 00 03:41:43.440 READ FPDMA QUEUED

Error 89 occurred at disk power-on lifetime: 9051 hours (377 days + 3 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 20 58 aa 00 Error: WP at LBA = 0x00aa5820 = 11163680

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

61 00 38 28 71 e2 41 00 03:41:45.574 WRITE FPDMA QUEUED

61 00 40 20 6b 4c 45 00 03:41:45.574 WRITE FPDMA QUEUED

60 00 08 78 59 aa 40 00 03:41:43.450 READ FPDMA QUEUED

60 00 f8 80 58 aa 40 00 03:41:43.450 READ FPDMA QUEUED

60 00 08 20 0a 09 40 00 03:41:43.440 READ FPDMA QUEUED

Error 88 occurred at disk power-on lifetime: 9051 hours (377 days + 3 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 10 58 aa 00 Error: UNC at LBA = 0x00aa5810 = 11163664

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

60 00 20 00 58 aa 40 00 03:41:40.275 READ FPDMA QUEUED

60 00 08 68 8f bf 42 00 03:41:40.270 READ FPDMA QUEUED

60 00 08 98 18 9f 42 00 03:41:40.261 READ FPDMA QUEUED

60 00 08 70 0d 9f 42 00 03:41:40.260 READ FPDMA QUEUED

60 00 08 60 1f 9f 42 00 03:41:40.260 READ FPDMA QUEUED

SMART Self-test log structure revision number 1

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Short offline Completed: read failure 90% 8517 2753855704

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

最近编辑记录 管毅 (2014-12-19 12:20:59)